Improvement/ upgradation of water supply at Mastgarh Ward no.3 including strengthening of existing distribution system at spots including replacement of Sluice Valves and Gate Valves under JMC Capex

(Earthwork in execavation by manual means in trenches for foundations, drains, pipes , cables etc. (Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 m² on plan, depth upto 1.5 mtr including disposal of execavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in (All kinds of soil)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing bu texcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Dumping of stones on level including supply of stone

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 coarse sand)

Carrige of sand and stone aggregate below 40mm lead upto 20km by Mechanical transport including loading,unloading and stacking

Carrige of stone aggregate below 40mm lead upto 10km by Mechanical transport including loading,unloading and stacking

Carrige of Soling stone lead upto 05km by Mechanical transport including loading,unloading and stacking

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (size of gate=3.50 x 1.50mtr)

Carrige of brick lead upto 10km by Mechanical transport including loading,unloading and stacking brick=5514 nos.

Supply of mild steel tubes, hot finished seemless type conforming to BIS 3589 incl GST &Contractor profits a)219.10 mm outer dia of wall thickness 6.3 mm weight 33.10 kg/m 60.00mtr

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing and fixing GI pipes complete,with GI Fittings,excluding trenching and refilling etc. (external work) 150 mm dia( medium grade)

Providing and fixing GI pipes complete,with GI Fittings,excluding trenching and refilling etc. (external work) 100 mm dia( light grade)

Providing and fixing GI pipes complete,with GI Fittings,excluding trenching and refilling etc. (external work) 80 mm dia( light grade)

Providing and fixing GI pipes complete,with GI Fittings,excluding trenching and refilling etc. (external work) 65 mm dia( light grade)

Welding including transportation plant at site etc. complete. By Electric Plant

Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. Layers not exceeding 20 cm in depth, lead upto 50 mtr. and lift upto 1.5mtr..

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).250mm dia Class I

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).200mm dia Class I

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).150mm dia Class I

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).100mm dia Class II

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).80mm dia Class II(LMR)

Providing flanged joints to double flanged C.I. / D.I pipes and specials including testing to joints.200mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).250mm dia Class II

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).200mm dia Class II

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).150mm dia Class II

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately).65mm dia Class II(LMR)

Please Enable Macros to View BoQ information