RENOVATION OF MUTTON MARKET SHOPS AT MURTHY MAHAL ROAD IN CHANNAPATNA CITY LIMITS

RENOVATION OF MUTTON MARKET SHOPS AT MURTHY MAHAL ROAD IN CHANNAPATNA CITY LIMITS

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. (PWD SR Vol.2, 2023-24, Item no.19....

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. (PWD SR 2023-24 R&B, Item No. 9.3, ...

Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and fixing Trasparent glass roof

Providing and Fixing uPVC Pipes 32 mm nominal dia. (I. No 985, P. No-A-42, Vol-2 of PWD Common SR 2023-24)

Providing and Fixing uPVC Pipes 50 mm nominal dia. (I. No 985, P. No-A-42, Vol-2 of PWD Common SR 2023-24)

Gunmetal non-return valve-vertical (screwed end) 32 mm dia (I. No-423, P. No-A-25, Vol-2 of PWD Common SR 2023-24)

Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards

8077/8092 PPR Gate valve 32mm (I. No-2.79.3, P. No-41, Vol-5 of PWD Common SR 2023-24)

Providing and Fixing 1 HP Motor

Providing and Fixing Foot Valve Assembly

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Providing Acid Wash

Polyethylene water storage tank with cover and suitable locking arrangement (I. No 622, P. No-A-30, Vol-2 of PWD Common SR 2023-24)