RequiredCertificate (Requested in ATC) Bid to RA enabled Yes 4.5 M Rubberised Inflatable Boat (Rescue Boats) ( 100 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Functions performed The inflatable boat shall perform the following tasks :- (a) Search & Rescue during floods (b) Transport men and material The inflatable boat shall perform the following tasks :- (a) Search & Rescue during floods (b) Transport men and material Conformity to Standards for Boat Accordance with IRS Classification Society Yes * 1/9 Rules and Norms issued and ISO 6185-3 Constructional Exterior Size of Boat
RequiredMin (Length X Breath in mm) 4500 x 1900 * Interior Size of Boat
RequiredMin ( Length X Breath in mm ) 3200 x 1000 * Carrying capacity
Requiredconsidering per person weight of 825/10 Kgs
RequiredSpeed 10 Persons
RequiredSpeed at light load with three persons not less than 15 Knots and at full load not less than 6 Knots * Floor Board (nos & Size) interlocked together to form a rigid platform (mm x mm x mm) - * Total Min Inflatable Chambers including inflatable Keel 5 * Diameter of Buoyancy tube
RequiredMin (mm) 500 * Inflatable Mechanism of Boat Foot Pump as well as Electric Pump (12 V DC) * The Hull
RequiredAir Tube (buoyancy Chambers)
Requiredfloor
RequiredKeel must made of composite fabric consisting Hypalon (outside layers ) and Neoprene (inside layers) with 1670 Dtex
Required1500 GSM as per ISO 15372 Yes * Transom - FRP Coated marine plywood as per IS 710 to form waterproof Cocoon as per ISO
RequiredOBM mount on transom should of marine grade aluminium alloy plate Yes * Over lapping of seam of Boat Quadruple * 5/8" Grab line nylon braided (as per IS 4227) all along the side for safety Yes * 2/9 Inflatable Keel of suitable Diameter for rigidity & stability during operation and swift water rescue Yes * Two nos drain valve akin to NRV on the lower most part of the transom board near the rear end fitment of the keel close to the centre line Yes * Air Valve one way type Conforming to International Standards (Inflation/Deflation Valve) for each compartment Yes * Make of OutBoard Motor Engine (OBM); OBM make should have proven indigenous product support throughout India Mercury Mercury
RequiredYamaha
RequiredMariner
RequiredSuzuki
RequiredTohastu Model No of OutBoard Motor Engine (OBM) - * Fuel Petrol * No of Strokes 4 4 No of Cylinders 3 3 Fuel Capacity; The OBM shall be provided with OEM supplied standard fuel tank
Requiredconnecting fuel hoses 25 * Power (HP) 30 30.0 Engine Starting; OBM Shall be provided with suitable storage stand Manual starting * Engine Stopping Switch Yes * Fuel Injection System ( write NA if not applicable) - * Engine Cooling System Watercooled with Thermostat * Engine Lubrication Wet Sump with Pressure * Engine Exhaust Through Propeller * 3/9 Trim System Manual Type * Type of Steering System Manual with hand tiller * Length of Engine Shaft suitable for transom (in cm) 50 * Colour of the Boat Orange * 2 paddle for Emergency Rowing Yes * Floor Board shall be interlocking type of High Strength Tempered Anodised marine grade aluminium alloy Marine plywood encapsulated in FRP coating Polygon (Al alloy) & U Channel (Al alloy) for fitment of floorboard - as per offered design Yes * Boat Shall have Round Conical ends for Rapid Planning Yes * Built in oarlocks for easy Rowing Yes * Two Stainless Steel SS 316 "D " Rings for Towing Yes * Two Layer of Material on Lower Tubes for better Puncture resistance and abrasion Yes * Standard Tool Kit including Open Spanner
RequiredSocket
RequiredT Handle
RequiredExtension for Socket
RequiredScrew Driver
RequiredFeeder Gauge
RequiredBox Spanner
Requiredand Torque Spanner of Required Numbers and Sizes Yes * Mandatory Fittment on Collar including 100 mm Rubbing Stake of V inyl/urethane/EPDM/Ne oprene
RequiredAnti chafing strip of 2" inch under keelson
RequiredChafing patch for coxswain’s position
RequiredYes * 4/9 Bow rubbing strip 4”
RequiredD rings
RequiredAnti Skid Coating etc as per standards Minimum Four Carrying handles shall be provided
Requiredtwo on each side and one front lifting handle One additional handle to be provided near Coxwain to provide grip to helmsman while operating OBM Yes * Additional Fittment on Collar including 2 paddle blade Pocket
Required2 rope Stowage pocket
Required4 securing Rings SS 316
Required1 bow Ring SS 316 etc Yes * Life saving Equipments in a wooden Box Carrying First Aid Kits Yes * Instruction Manual Yes * No of Life jackets 10 * No of Life Buoys 2 * Repair Kit fabric patches 05
Requiredadhesive tube (Dendrite) 500 gm
Requiredroughing tool 1 set * PVC coated nylon fabric Valises and Store bags (i) Heavy duty storage bag for Hull – 01 (ii) Heavy duty storage bag for Floorboard – 01 (iii) Storage bag for oars & other accessories – 01 * Additional spares (i) Inflation/Deflation Valves - 10 Nos (ii) Pressure guage - 01 No (iii) Plugs for Water Drain - 04 Nos (iv) NRV for Water Drain - 10 Nos (v) Electric Inflation pump - 01 No (vi) Bellow Inflation Foot Pump - 2 Nos (vii) Patching material with adhesive to repair leak/damage in buoyancy tube. * OBM Spares 1.1 Engine oil filter - 03 * 5/9 nos. 1.2 Fuel Filter - 06 nos. 1.3 Air Filter - 02 nos. 1.4 Fuel line with priming valve and connectors – 01 no. 1.5 Propeller - 01 No. 1.6 Spark plug - 03 nos. 1.7 Spark plug wrench -01 no. 1.8 Water pump repair kit – 01 set 1.9 Water pump impeller – 01 no. 1.10 Gear oil drawn screw washer – 06 nos. 1.11 Lubrication oil drain plug washer – 02 nos. 1.12 Fuses of all system complete - 02 set Test & trials As per IRS rules and norms * Marking on builder’s plate fitted on inner side of the transom BOAT GENERAL PURPOSE INFLATABLE NO.
RequiredDATE OF SUPPLY
RequiredNAME OF MANUFACTURER
RequiredMAX LOAD CARRYING CAPACITY (KG)
RequiredMAX MOTOR RATING (KW)
RequiredMAX NO. OF PERSONS
RequiredRECOMMENDED WORKING PRESSURE * Performance Conformity to Standards for Rubberised Inflated Boat As per ISO 6185-3 4.5 m (For 10 Persons ) * Weight of Boat without OBM 130 * Weight of Boat max with passengers without OBM 900 * Certification Availability of approved Drwaing from IRS/Govt of India (DG Shipping) approved Yes * Availability of Test Report including Environmental test as per ISO 6185-3 latest amendment from IRS Govt of India (DG Shipping) approved to prove confirmity to specification for Yes * 6/9 declared parameters Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Warranty in Years 2 2.0 Test Report to be provided to buyer on demand Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.