WBPHED/EE/AMD/ NIeT- 36 of 2024-2025/3

Amount

Supply and delivery of following materials at site:-

Vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification:-Discharge (Q) : 150 m³/Hr.Head (H): 49 mtrs,Outlet - 150 mm dia,Motor: Operating Voltage: 415 (± 10%), Phase: 3 Ph, 50 Hz ±6%,Speed: 2900 RPM, Power-30 KW/45 HP,Method of starting: S/D. (Make:- Approved make)( Warranty certificate & Curve chart should be submitted at the time of delivery)

150 mm dia, PN-1.0 Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 Cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm(seat test) and body tested to 15 kg/sqcm.All the valves should be tested by closed end method only.(Make-Approved Make)

150 mm dia, PN-1.0 Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & hinge pin of st.st.AISI 410, valve suitable for a maximum working pressure of 10 kg/cm2 (Seat test) & body tested to 15 kg/Sqcm.(Make-Approved Make)

3 Core X 16 Sqmm 1.1 KV Grade flat submersible copper conductor cable.(One For Star Other for Delta)(Make-Approved Make)

3 Core X 35 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC.(Make-Approved Make) (Test Certificate is to be submitted at the time of delivery)

150 mm dia Heavy duty long bend as per IS:2062.

150 mm dia MS Flange as per IS:1538.

150 mm dia,M.S Black Pipe as per IS:1239(Part-I-2004), Class-C Heavy Duty type.

200 mm dia, 8 mm thick, MS Black Pipe as per IS:3589, Gr-330.

Suspension clamp for suspend the S/M P/M set from top of the CWR, Size Ǿ 150 mm dia X 75 mm width X 12 mm thick.

200 mm dia Slip on Flange as per IS:1538.

150 mm dia MS Nipple.

Kiosk Box size( 500 mm X 500 mm X 150 mm) contains with 2 Nos Terminal.

Supply, delivery and storage at site of following 150 mm dia Glycerine filled Diaphragm Seal type Gagues with syphon tube and three way cock and as per technical specification. Pressure Gauges (0-15 kg/ cm2)(At the delivery of S/M P/M)

Installation of all items as mentioned in Sl.No. 1.01 to 1.14 No item including lowering of submersible pump into CWR by using derrick & chain pulley arrangement, pipe supports, valve supports, laying of cables through PVC Pipe, jointing with necessary jointing materials, laying of pipe & joining with 200 mm existing MS Line, fitting & fixing of Kiosk Box on the CWR also doing necessary connection, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc, all complete as per relevent IE Rules, and upto entire satisfaction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors, Valves etc.Painting of the installation (viz. valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer.

Add GST @ 18%

Add CESS @ 1%

INDUSTRIAL ELECTRICAL CORPORATION (BID ID -5908926)

M/S. SWAPAN BANERJEE (BID ID -5908739)