WELCOME MAINTENANCE, REPAIR TO COMPOUND WALL, FOOTPATH, HARD STANDING, INTERLOCKING, KERBSTONE, INTERNAL WIRING, SOCKETS, SWITCHE, SUMMER APPLIANCES, HOT WATER APPLIANCES AND OTHER ALLIED WORK AT AF STN AASTHA COMPLEX, 5 AFLU UNDER AOR OF GE(AF)FBD

Amount

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls complete all as specified and directed.

All as per item No 01 above but on ceilings

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and directed.

M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old surface by scrapping etc and applying one coat of wall care putty 3mm thick on wall surfaces all as specified and directed.

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed.

All as per item No 06 above but on Wooden surfaces.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed.

M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note:-Integral water proofing compound shall be measured and paid separately

M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed.

M & L preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L preparation of new plastered surfaces on ceilings & applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and as directed.

M&L for providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and directed.

M&L for providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed.

M&L for Non skid ceramic coloured plain tiles,300 x 300 x 7/400*400*7mm thick, conforming to Group B-IIA of IS-13712, first quality, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles, 300/350 x 450 x 7mm thick, glossy finish, conforming to Group B-III of IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Cleaning &removal all scales & dirt etc, from tanks & from mouths of circulating pipe etc exc 500 but n.exc 1000 ltrs capacity complete all as specified and directed.

Cleaning &removal all scales & dirt etc, from tanks & from mouths of circulating pipe etc exc 250 but n.exc 500 ltrs capacity complete all as specified and directed.

S&F for vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with 'P' or 'S' trap, with integral foot rest, including demolition and removal of existing old pan complete all as specified and directed.

S&F in repair Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with scat cover complete all as specified and directed.

Taking up or down steel/PVC tubing and connections,15/20 mm bore, and making good the surfaces complete all as specified and directed.

M&L cutting chases in brick walls for concealed water tubbing and making good to facing where required and pointing in position in CM 1:3 cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair 15/16mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 20mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair Stainless steel Harrison curtain rails, 19/20mm dia, including stainless steel brackets and fixing brackets, stops, rollers etc including taking down old one complete all as specified and directed.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old u/s complete all as specified and as directed

S&F 50mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixed complete in wall ,floor etc including taking down old u/s complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I complete all as specified and directed.

Dismantaling water tanks and removing to store exc 250 but n. exc 500 ltrs complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 18/19 mm tk Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, Ditto fixed in repair for copboard shutter, shelve, partiion & kitchen cabinet complete all as specified and directed.

S & F in repair Stainless steel plate rack (bartan stand) made with 4-5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size complete all as specified and directed.

M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

M&L for PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed.

M&L for PVC (SWR) pipes, 100/110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F vitreous china wash basin, white back, size 550 X 400 mm including new waste coupling and waste pipe etc , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor and the rates for the same deemed included.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including new waste coupling and waste pipe etc complete all as specified and directed.

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valves, fancy type, CP with long shank and cup (concealed type), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.

S&F in repair of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No 54 above but except bricks.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care compound of altek/birla putty for exterior/interior on old scraped wall/ceiling surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of old stone, concrete surfaces of any description over 10 CM width or girth and applying one coat of plastic emulsion paint (Weather Coat) on old footpath/colour tiles/ kerb stone etc (colour and pattren as per approved by EIC ) complete all as specified and directed.

M & L for precast cement concrete loveres and jallies, 25mm thick, type B0 1:2:4 (12.5 mm graded), set in CM 1:4, including all mouldings complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as specified and directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection / path/ any paved area complete all as specified and directed.

M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 60 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment,(M-35) grade any colours as approved by EIC /GE complete all as specified and directed

Lablour only for 60 mm thick machine cut precast concrete inter locking paver block (except tile) ,(M-35) grade any colours as approved by EIC /GE complete all as specified and directed

M&L for 80 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment ,(M-40) grade any colours as approved by EIC /GE complete all as specified and directed

Labour only for 80 mm thick machine cut precast concrete inter locking paver block (except tile) ,(M-40) grade any clours as approved by EIC /GE complete all as specified and directed

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M & L for machine pressed chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor/sub base finishes complete all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm complete all as specified and directed.

M&L for providing and laying ator near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for removing extra material to a distance not exceeding 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly, drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators complete all as specified and directed. Note:- After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 75 above but 5 Amp socket outlet, independent.

All as per item No 75 above but on the same board.

All as per item No 75 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable.

All as per item No 75 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through PVC casing caping of ISI marked with fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators complete all as specified and directed by Engineer-in-Charge. Note :-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 80 above but 5 Amp socket outlet, independent.

All as per item No 80 above but on the same board.

All as per item No 80 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.

Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed.

Supply & fixing in replacement of switch 15 Amps SP one way ISI Marked complete all as specified and directed.

Supply & fixing in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and directed.

Supply & fixing in replacement of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and directed.

Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic sheet etc complete all as specified and directed.

S&F in replacement for modular switches 6 amps single pole one way complete all as specified and directed.

S&F in replacement for modular sockets out let 6 amps 6 pin 2 module with shutter complete all as specified and directed.

S&F in replacement for modular switches 16 Amps single pole one way complete all as specified and directed.

S&Fin replacement modular socket out let 6-16 Amps 3 pin combined shuttered complete all as specified and directed.

Supply & fixing in replacement of stepped type electronic fan regulator modular complete all as specified and directed.

S&F in repair ceiling rose complete all as specified and directed.

Supply & fixing in replacement of ding dong bell electric 230 volt AC complete all as specified and directed.

S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed.

S&F single pole blanking plate in the existing cover plate complete all as specified and directed.

Supply and fix modular white cover plate with frame 3 module ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 4 module ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 6 module ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 8 module ISI marked complete all as specified and directed.

Supply and fix modular metal flush box 3 module ISI marked complete all as specified and directed.

Supply and fix modular metal flush box 4 module ISI marked complete all as specified and directed.

Supply and fix modular metal flush box 6 module ISI marked complete all as specified and directed.

Supply and fix modular metal flush box 8 module ISI marked complete all as specified and directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 4"x4" complete all as specified and as directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 7"x4" complete all as specified and as directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 8"x10" complete all as specified and as directed.

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 20 Amps complete all as specified and directed.

M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 6 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable complete all as specified and directed. NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 110 above but copper cable single core of size 4 Sqmm in two run with earth wire 4 Sqmm single run for continuity complete all as specified and directed. NOTE :- 2 runs of 4 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 110 above but copper cable single core of size 2.5 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity complete all as specified and directed by Engineer-in-Charge. NOTE :- 2 runs of 2.5 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

M&L PVC insulated FRLS single core with strandard copper cable of size 2.5 Sqmm in two run and 2.5 Sqmm one run for earth and drawing through ISI marked casing caping including taking down old UNSV cable complete all as specified and directed. NOTE :- 2 runs of 2.5 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

Supply and fix in replacement post top lantern LED 40 W or next highest wattage having IP65 protction for single phase connection 50 Hz 230 Volts complete all as specified and directed.

Supply and fix in replacement LED bollard fitting 9 Watt with luminaire with MS Pipe housing with glare free PMMA diffuser , IP65 of height 800 mm suitable for single phase connection 50 Hz 230 Volts complete all as specified and directed.

M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories and complete all as specified and directed.

M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed.

Supply and Fixing LED street light fitting 60 Watt pressure die case aluminium housing LED street light luminaires suitable for existing street light pole including all fixing accessaries complete all as specified and directed.

Supply and fixing in replacement of old unsv GI bracket made out of 32 mm bore,light grade 1.2 m long bent to shape suitable for street light fitting including MS flat clamp 50 x 6 mm 2 Nos for each bracket with nut & bolt complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 6 sq. mm nominal cross section in service connections complete all as specified and directed.

S&F sheet metal enclosures DB Double door Verticle distribution type, 04 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed. Note : - MCCB shall be measured and paid separately

S&F sheet metal enclosures DB Double door Verticle distribution type, 06 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed. Note : - MCCB shall be measured and paid separately

S&Fix in replacement MCB DB TPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&Fix in replacement MCB DB SPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&Fix in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&Fix in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&Fix in replacement MCB DB SPN 12 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etccomplete all as specified and directed.

Supply & fixing in replacement of MCCB TPN 63Amps 16KA complete all as specified and directed.

S&F in replacement of MCCB TPN 125 Amps 415 Volts 16 KA as per suitable sample of size complete all as specified and directed.

S&F in replacement of MCCB TPN 100 Amps 415 Volts 16 KA as per suitable sample of size complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240 Volts."B" grade complete all as specified and directed.

S&F in repairs MCB,SP 40 Amps, 240 Volts."B" grade complete all as specified and directed.

S&F in repairs MCB SPN, 40 Amps, 240Volts "B" grade complete all as specified and directed.

S&F in repairs MCB SPN, 63 Amps, 240Volts "B" grade complete all as specified and directed.

S&F in repairs MCB TPN, 63 to 100 Amps, 415Volts "B" grade complete all as specified and directed.

Supplying and fixing PVC conduit 25 MM dia medium grade ISI marked along with accessories in surface/recess I/C or cutting the wall and making good the same in case of recessed conduit as required complete all as specified and directed.

S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete all as specified and directed.

Supply and fix modular type gang box(3 module for one socket and one switche) suitable for 5/15amp 6pin including plate cover plastic sunken box etc including suitable size of switches and sockets complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and directed.

Taking down storage water heater 25 ltrs capacity from wall for repair/replacement of unserviceable parts and refixing with fasterners Nuts and washers the same after repair work complete all as specified and as directed.

M&L for replacement of thermostate 0-60 degree as per sample in water geyser 25/50 litre capacity ISI Make as per sample complete all as specified and directed.

M&L for replacement of heating element 1.5KW,Triangular/round type as per sample complete all as specified and directed.

M&L for replacement of heating element 2 KW with complete assembly of any model and type as per site requirement/sample complete all as specified and directed.

Material and Labour for disconnecting from electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly 6/9 holes with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as specified and directed.

M&L for replacement of geyser outer body cover of 25 Ltr capacity made out of 16 SWG powder coated complete with all connected accessories suitably fitted with existing wall complete all as specified and directed.

M&L for replacement of geyser tank stainless steel suitable for 25 Ltr capacity geyser complete all as specified and directed.

M&L for replacement of PVC connection with brass inserts suitable for hot/cold water, 60 cm long (for hot and cold water inlet and outlet) having PTMT nuts with washer complete all as specified and directed.

S & F in Replacement of bottom cover suitable cylindrical type geyser as per existing required as per site for 25 Ltrs capacity complete all as specified and directed.

Dismantling and opening storage tank of geyser 25 litre capacity to identify the leakage ,repair the spot by suitable welding carefully including making good insulating material, assembling and testing complete all as specified and directed.

S & F in replacement of indication lamp red and green (pilit type ISI marked) for 25 Ltrs water heater complete all as specified and directed.

Supply and fixing in replacement of PVC insulated flexible copper conductor cable 40/0.0076 size 3 core suitable for 650 volts grade complete all as specified and directed.

S & F in replacement of glass wool in any capacity of geyser complete all as specified and directed.

Taking down ceiling fan complete any type size from existing location and cleaning body blades etc including servicing, greasing,oiling,replacing wornout bearing ,bush and refixing the same at site complete all as specified and directed.

All as per item No 154 above but for Exhaust fan complete.

All as per item No 154 above but for wall/floor mounted fan .

M&L for rewinding unserviceable ceiling fan 1200/1400 mm Sweep from site by strip opening,cutting removing the burnt winding from starter cleaning the slots and rewind the same with original guage of super enameled copper winding wire, insulation materials and all accessories & varnishing etc replacement of service wire copper twisted size 23/0.0076 including reassembling the fan complete all as specified and directed.

All as per item No 157 above but for Exhaust fan 300 mm sweep.

All as per item No 157 above but for wall/floor mounted fan 450 mm sweep.

M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust incl writing letter i.e MES No____ etc complete all as specified and directed.

Material and Labour for Replacement of old unserviceable fan blades, (ISI Marked), suitable for 1200mm sweep ceiling fan duly painted in white/brown by using spray gun method(fully furnished) complete all as specified and directed.

Material and Labour for repalcement of old unserviceable down rod of ceiling fan of dia 20mm bore "medium grade" complete with split pin, hanging clamp and rubber real (length of rod not less than 45cm and not more than 60cm) dully painted in white/brown by using spray gun method (fully furnished) complete all as specified and directed.

Supply and Fix cable PVC insulated and overall sheathed with flexible copper conductor cable of size 0.5 sqmm,3 core cut to size of approx 0.30 metre from block of fan to ceiling rose complete all as specified and directed.

Material and Labour for replacement of old unserviceable gun metal bush of ceiling fan including neceassry laith, Grinding and welding work complete all as specified and directed.

Material and Labour for replacement of old unserviceable shackle assembly kit (Rubber real -01, MS split clamp two Nos, nuts and bolts washers- 2 Nos & split pin -02 Nos) suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed.

Material and Labour for replacement of old unserviceable steel screw of size 5mm to 8mm (to be used for fixing of fan blade) complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, and accessories 230V, 1200/1400mm sweep with squirrel cage induction motor 5 Star rating complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan sweep 250 mm in replacement made up of sturdy engineering metal body complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed.

Supply and fix Ventilation fan PVC (250 mm Sweep) with louvers and acessories complete all as specified and directed.

Supply and fix Ventilation fan PVC (200 mm Sweep) with louvers and acessories complete all as specified and directed.

Material and Labour for replacement of old unserviceable capacitor AC 400/415 volts 2.5 mfd (ISI marked) complete all as specified and directed.

Material and Labour for replacement of old unserviceable capacitor AC 400/415 volts 3.15 mfd (ISI marked) complete all as specified and directed.

M/S Yamin (BID ID -3483360)

PRAHLAD NARAIN KOLI (BID ID -3479415)

Singh Associates (BID ID -3488704)