Construction of Govt. High School Building Themgarang Tehsil Sangla Distt Kinnaur H.P. SH- Balance work of the Building at G.H.S. Themgarang i.c Wood work, Steel work with chajjas Wooden Ceiling Painting and Water supply and Sanitary Installation

Providing woodwork in 2nd class deodar wood frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing woodwork in Hard wood frames of Ceiling, doors, windows, clerestory, windows and other frames wrought, framed and fixed in position including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per thedirection of the Engineer-in-charge.

Providing and fixing 40mm thick second class deodar wood paneled shutters 4935 for doors having 12mm thick phenol bonded both side prelaminated particle board ISI marked IS No. 12823 of approved shade infill panel of Action Tessa / century / Kitlam including M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing 40mm (forty millimeter) thick with 2nd class deodar wood. wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestory windows including bright clerestory windows including bright finished black enameled iron hinges with necessary screws. in including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 12mm. (twelve millimeter) thick prelaminated board both side bwp phenol bonded exterior grade paneled shutters 40mm.(forty millimeter) thick frame of Ist class deodar wood for doors including bright finished/black enameled iron butt hinges with necessary screws including carriage of material, by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 19mm (nineteen millimeter) thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 12 mm (Twelve Millimeter) thick 1st class kail wood in wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 12mm (Twelve millimeter) thick Green Chalk Boards of superior quality including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 300 x 16 mm (Three hundred into Sixteen millimeter) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 250 x 16mm (Two hundred fifty into Sixteen millimeter) anodized Stainless steel sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 250x10mm Stainless steel tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per thedirection of the Engineer-in-charge.

Providing and fixing 200 x 10mm Stainless steel tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 125 mm Stainless steel handles anodized transparent or dyed to required colour shade with necessary screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 100 mm Stainless steel handles anodized transparent or dyed to required colour shade with necessary screws etc. complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing M.S. in Plain grill. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material, 1labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately)

Providing steel work welded in built up sections/ hollow section trusses and framed work, including cutting hoisting and fixing in position and applying a priming coat of red lead paint in trusses and purlins of buildings. and the like and as per HPPWD specifications of 1990 volume-1 including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint., Framed guards, bars ladders railings brackets and similar works. of buildings. and the like and as per HPPWD specifications of 1990 volume-1 including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting. Ready mixed paint brushing with white lead for priming. in Ready mixed paint brushing wood primer pink including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping With enamel paint other than white including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brush in to give an even shade including cleaning the surface of all dirt, dust and other foregin matters in Enamel paint other than white including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Painting two coats with enamel paint (excluding priming coat) on new concrete/masonry/ plastered surface with textured paint/brushing for use on floors to give an even shade including cleaning the surface of all dirt dust and other foreign matter sand papering as required on all surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying a putty required for making the surface

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type WC pan ) size 580 mm (earth work , bed concrete, foot rest and trap to be measured and paid for separately) In Orissa pattern including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing PTMT coloured/white high density polyethylene/ poly propylene 10 ltr. Capacity (Full flush) European Standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15 mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, out let and overflow pipe, 40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of material with in all leads and other incidentals. including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fxing vitreous china bowl pattern urinal in flat back type of size 430 mm x 260 mm x 350 mm including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste) pipe to be measured and paid for separately including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing PVC floor trap in 110 mm X 90 mm of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 100 mm size "P" or "S" trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) in vitreous china including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing vitreous china wash basin with single hole for piller trap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting. With flat back in 550 mm X 400 mm including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing PVC reducer including jointing with approved adhesive etc. complete 110 mm X 90 mm including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing P.V.C. connection pipe with brass unions in 300/450mm length. including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing CP brass waste for wash basin or sink in 32 mm dia including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 15mm nominal bore brass union including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 15mm nominal bore brass full way valve with wheel including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 600mm X 450mm bevalled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass bib tap with capstan head. In 15 mm dia (Heavy Duty) including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass pillar tap with capstan head In 15 mm dia (Heavy Duty) including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (heavy grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore heavy duty including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 1000 ltr PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 110 mm dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 110 mm dia PVC collars ISI marked including fixing with approved adhesive etc complete in including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and fixing 110 mm dia PVC Plain bend ISI marked including fixing with approved adhesive etc complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and as per direction of the Engineer-in-charge.

Providing and laying plain cement concrete nominal mix 1:3:6 (one cement : three sand : six graded stone aggregate 40 mm (forty millimeter) nominal size) in open foundations and plinths as per drawings and technical specification for rural roads clause 802, 803, 1202 and 1203 and curing complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per the direction of the Engineer-in-charge.

Providing and fixing 25 mm thick Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of material, l labour, tool l and plants through all modes of transportation within all leads and lifts as per PWD specification and as per thedirection of the Engineer-in-charge.

Please Enable Macros to View BoQ information