ADDN ALTN AND RENOVATION OF TOLET CUM BATH ROOM AT BALAPUR PROVN OF INTERLOCKING TILES AND WALL PANELLING IN OR LIVING SHELTERS AT QASBA NAGAM AND PROVN OF ELECTRIC CABLE AND CONNECTED ITEMS ALONG PERIMETER FENCING OF CAMP OF AGE P UNDER GE 861 EWS

Amount

Dismantling floor hearth or wall tiling, chequered cement concrete tiles incl cement mortar bedding (but not backing) all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. complete all as specified

Dismantling of unframed timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

M&L for glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with screws to timber frame complete all as specified and directed

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with screws to timber frame complete all as specified and directed

S&F 2nd Class hard wood plain fillets square rectangular or triangular in section clean sawn fixed with nails sectional area exc 13 but not exc 25 sqcm complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull nosed,splayed,chamfered or rounded on one edge or face complete all as specified and directed.

S&F in repairs Vitreous china pedestal type Wash Basin white or ivory colour, oval shaped, size 665x495mm ,including CP waste coupling, waste pipe fixed brackets complete all as specified.

S&F in repairs vitreous china twin action wash down water closet pan (pedestal pattern) coloured of size 660mmx360mmx760mm including fixing bolts ,flushing cistern, flush pipe seat cover,P or S trap complete all as specified and directed.

S&F single lever wall mixer (3 in 1) exposed shower pipe ,spout fitted with overhead rain shower ,telephonic hand shower and 1.5m flexible chromium plated hose fixed with hot and cold water mixer including all fittings complete all as specified.

S&F central hole basin mixer with 450mm chromium plated flexible connection complete all as specified.

S&F health faucet brass body with wall hooks and 1m chromium plated hose pipe complete all as specified.

S & F brass Chromium Plated Towel rail 20mm dia, 600mm long fixed to wall with and including Chromium plated brass screws and PVC gutties, complete all as specified and as directed

S & F chromium plated brass soap dish complete all as specified.

S & F fancy type CP brass tiolet paper holder with flap gaurd complete all as specified and directed

S & F fancy type corner glass shelf of size 300mmx 300mm x5.5mm thick glass with CP Railing, complete all as specified.

S & F 5mm thick glass mirror of size 700mmx500mm with double coat for protection and longevity and grounded edges for saftey and plating on the back for better reflection complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Taking up or down 15 mm dia GI Tubing and connections including removal complete all as specified.

Taking up or down 20 mm dia GI Tubing and connections including removal complete all as specified.

S & F Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed.

S&F Mild steel galvanised iron water tubing 20 mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

S&F in repairs 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,complete all as specified and directed

S&F in repairs 15mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each, complete as specified and directed

S&F Aluminium powder coated glazed door shutter alongwith hydraulic door closer with style rails ( Top, bottom & lock rail) top rails meeting style, lock rail size 83x44mm, top & bottom rail size 83x44mm, frame for chowkats size 100x44mm including door lock , handles 5.5mm thick tinted glass in top and 12mm thick prelaminated particle baord (both side laminated) in bottom panel including necessary jointing cleat, glazing clips, rubber packing, snap beading, screws of suitable size,one number 200mm aluminium tower bolt,one number mortice brass lock 100mm size 4 lever (vertical type) etc (thickness of aluminium section shall not be less than 1.8mm), complete all as specified and directed.

S&F Aluminium powder coated glazed sliding/fixed double ventilator shutter with style rails ( Top, bottom & lock rail) top rails meeting style, lock rail size 34x44mm, top & bottom rail size 34x44mm, frame for chowkats size 100x44mm including door lock , handles 4mm thick figure glass in top and stainless steel wire cloth in gauzed window shutter including necessary jointing cleat, glazing clips, rubber packing, snap beading, screws of suitable sizes etc (thickness of aluminium section shall not be less than 1.8mm), complete all as specified and directed.

S&F PVC waste pipe suitable for fixing with 32mm waste fitting for wash hand basin and sink complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends 110mm bore dia complete all as specified and directed.

S&F PVC (SWR) junction (single T) equal or unequal 110mm bore dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 100mm bore dia complete all as specified and directed.

S&F PVC (SWR) 100mm dia floor trap plain with grating including jointing with solvent complete all as specified and directed.

S&F for Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball inlcuding taking down existing tank complete all as specified

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

Hard core of broken stone or boulders of guage exc 63mm but n. exc 100mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting Power roller exc 8 tonne & n exc 12 tonne n exc 150mm compacted thickness all as specified.

M & L for 100mm thick Plain Cement Concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in sub base of floor and pavings etc. etc complete all as specified and directed.

M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15656 -2006 of 80 mm thick M 40 with grey cement and pigment including 50mm thick sand cushioning all as specified and directed.

M&L for cement concrete 1:3:6 type B-1 (using 20mm graded aggregate as in copings etc including necessary form work complete all as specified and directed.

Point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl necessary fittings & fixture and to be turminated in sunk cast iron/pressed steel/PVC terminal boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

Description all as per srl item No-45 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

Desription all as per serial item No 45 here-in-before but for 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead, complete all as specified and directed.

S&F Switch piano flush button types 5/6 Amp, single pole, one way complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp, flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1,3 pin 5 pin, 15 Amp flush type, universal, complete all as specified and directed.

S&F ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/Polycarbonate, isolated body, complete all as specified and directed.

S & F lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular, suitable for batten fittings, complete all as specified and directed.

S&F decorative ultra slim linear LED in replacement of 18 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed. Make : Havells Cat Part No LHEXBLP5PN1W018 or Equivalent/C&S/Bajaj.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

M & L for Sheet metal enclosures distribution board, single pole and neutral 4 way with 200 Amps rated bus bar 240 V, double door IP-43 protection, fixed on wall duly groted in solid block wall or n wooden board with electrical connection and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F MCB SPN, 32Amp, 240 volts, 10kA, 50Hz, 'C' series and making connections, complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 240 Volts 10 KA, 'B' series and making connections, complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by -14.5%(Minus) (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Fixing only Exhaust fan 230mm to 250mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed. Note : Exhaust fans shall be supplied by department free for fixing only.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm nominal cross section 2 core all as specified and directed.

Supply,laying and testing 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 50 Sqmm nominal cross section 3.5 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid separately .

Description all as per item No. 61above but cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No.61 above but cross sectional area 25 Sqmm 3.5 core complete all as specified and directed.

Supply & fixing of junction box of size 300mmx250mmx180 mm made of MS Sheet 2mm thick, front door openable with fixing screw painting with two coats of synthetic enamel powder coated paint over a coat of red oxide including alumn bus bar 4 Nos of size 25mmx3mm mounted on epoxy based post insulators and drilled holes for connection including gland for incomming and outgoing cable complete all as required at site or directed by Engr-in-charge.

M&L MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified.

M&L MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified.

M&L Change over switch on load 415 volts 4 pole in sheet metal enclosure of capacity 63 Amps.

Supply and fixing in repair LED flood light 35 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP65 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation for errection of ,poles/stays/cable etc and getting out in any type of soil, complete all as specified and directed.

Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

Supply and fixing GI tube, 50 mm bore, light grade with all fittings/clamps of suitable size and nuts and bolts, fixed to walls, pole ceiling or laid in trenches for cable protection complete all as specified and directed.

BHAT CONSTRUCTIONS AND BUILFERS

M/S A.N CONSTRUCTIONs