REPAIRS TO STEEL AND TP FURNITURE ITEMS AND REPAIRS/ RE-CANNING/ PAINTING/ POLISHING TO WOODEN FURNITURE ITEMS AT AF STN YELAHANKA

Amount

REPAIRS/ RE-CANNING/ PAINTING/ POLISHING TO WOODEN FURNITURE ITEMS M & L for Polishing the following Furniture items with French Polish with high glossy finish including fillings of holes/cracks with bees wax and smoothing with sand paper complete all as directed by Engr-in-Charge. NOTE : Polishing shall be carried at furniture yard of BSO GE (AF)Yel/Offr Md Accn/Domestic Area/Tech Area of AF Stn Yel all as specified and as directed by the Engineer-in-Charge.

Bed with ply top (FD - 246)

Bin soiled Linen (FD - 244)

Book Case open Small (FD - 355)

Chair Dinning / WBB (FD - 279)

Chair Easy (FD - 229 / 281)

Chair Writing (FD - 202 / 280)

Hat Stand with Mirror (FD - 361 / 362)

Peg Table (FD - 236 27 384)

Sofa set 5 seater (FD - 281/373)

Sofa Chair Single Seater (FD - 281/373)

Stool Dressing CB (FD - 282 / 374)

Table Writing (FD - 275)

Table 3’x3’ Wooden (FD - 88 / 288)

Table Dining 6 Persons (FD-239/273/376 & FD/MAP-II/03)

Table Dining 8 persons (FD-239/273/376 )

Table Centre (FD - 235 / 375)

Table Office Clerk Wooden (-)

Teapoy (FD - 232 / 278)

Table Bed Side (FD - 248 / 276)

Table 3’ x 2’ / one piece all purpose (FD - 224 / 283)

Table Dressing Gents (FD - 230 / 379)

Table Dressing Ladies (FD - 378)

Table Office Officer Wooden (-)

Table Conference (FD - 287)

Board Notice 6' x 4' (FD - 99)

Board Notice 8' x 4' (FD - 99)

Chair Dining long back (FD - 357)

Chair Easy cushioned (FD - 229 )

Side board large (FD - 372)

Removing existing worn-out plastic cane from Chairs wooden/ stool dressing CB/Bin soilded linen and re-canning the same with superior quality Plastic Cane 2 mm wide (white/cream) and provide beading with superior quality Plastic Cane 3 mm wide and all as directed by the Engineer-in-Charge.

Chair Dining (Drawing No FD-279).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable back batten and S & F new back batten made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Chair Easy (Drawing No FD-229/ 281).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of back frame and S & F new side rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top rails of back frame and S & F new front rails made out of First Class teak wood well seasoned.

Removing the broken/unserviceable arms and S & F new arms made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Chair Writing (Drawing No FD-202/ 280).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable arms and S & F new arms made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable back batten and S & F new back batten made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Chair Wooden Bottom (Drawing No FD-225/ 285).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable plywood bottom and S & F new plywood bottom as per existing shape & size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable back batten and S & F new back batten made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Peg Table (Drawing No FD-236).

Removing the broken/ unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Sofa Chair Single Seater (Drawing No FD-281/373).

Removing existing unserviceable PU Foams and provide new foams of 40 density X 100 mm thick for seat & back , shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal all as specified and directed. Note: The cost of Tapestrey cloth not less than Rs.500/- per meter.

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable arms and S & F new arms made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom rails and S & F new bottom rails made out of First Class teak wood well seasoned.

Sofa Set 3 Seater (Drawing No FD-281/ 373).

Removing existing unserviceable PU Foams from and provide new foams of 40 density X 100 mm thick for seat & back, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal all as specified and directed. Note: The cost of Tapestrey cloth not less than Rs.500/- per meter.

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing and as directed by the Engr-in-charge

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable back rails and S & F new back rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable arms and S & F new arms made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Writing (Drawing No FD-275/ 249).

Removing the broken/unserviceable legs and S &F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable drawers made out first class teak wood with plywood bottom and S & F the new drawer made out first class teak wood with plywood bottom as per existing shape & size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size and thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for Table drawers as per existing pattern as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Dining 6 Persons (Drawing No FD-239/ 273/ /376).

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Dining 8 persons (Drawing No FD-239/ 273/ 376).

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specification and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Center (Drawing No FD-235/ 375).

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specification and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Bed Side / Table Bed Side (MAP) (Drawing No FD-248 /276).

Removing the unserviceable side legs made out of particle board and S & F of the same made out of particle board as shown in drawing and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F new handles for Table drawers as per existing shape & size as shown in drawing and as directed by the Engr-in-charge.

Teapoy (Drawing No FD-232/ 278).

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Bed Hard with Plywood Top (Drawing No FD-246).

Removing the broken/unserviceable long rails from Bed and S&F new long rails made out of Honne wood. The dimension of the parts shall be of the same pattern/size as shown in drawing and as directed by the Engr-in-charge.

Removing the broken/unserviceable head board from Bed and S&F new head board made out of Honne wood as shown in drawing and as directed by the Engr-in-charge.

Removing the broken/unserviceable foot board from Bed and S&F new foot board made out of Honne wood as shown in drawing and as directed by the Engr-in-charge.

Removing the broken/unserviceable plywood top and S & F new plywood top as per existing shape, size & thickness as shown in drawing and as directed by the Engr-in-charge.

Table 3' x 2' with / without drawers (Drawing No FD-224/ 283).

Removing the broken/ unserviceable leg and S & F new leg made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable drawers made out first class teak wood with plywood bottom and S & F the new drawer made out first class teak wood with plywood bottom as per existing shape & size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom stiffeners and S & F new bottom stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for Table drawers as per existing pattern as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Dressing Gents with Mirror (Drawing No FD-230/ 379).

Removing the broken/ unserviceable dressing chest made out of pre laminated particle board and S & F of the same as per pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable plywood back 6 mm thick and S & F new plywood back 6 mm thick as per existing shape & Size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable miror 3 mm thick and S & F new mirror 3 mm thick as per existing shape & Size as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for drawers as per existing pattern as shown in drawing & specifications and as directed by the Engr-in-charge.

Table Dressing Ladies with Mirror (Drawing No FD-378).

Removing the broken/ unserviceable dressing chest made out of pre laminated particle board and S & F of the same as per pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable plywood back 6 mm thick and S & F new plywood back 6 mm thick as per existing shape & Size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable miror 3 mm thick and S & F new mirror 3 mm thick as per existing shape & Size as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for drawers as per existing pattern as shown in drawing & specifications and as directed by the Engr-in-charge.

Chair Dining Officer (Drawing No FD/MAP-II/04).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable stiffeners of seat frame and S & F new stiffeners made out of First Class teak wood well seasoned as shown in drawing & and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom rails and S & F new bottom rails made out of First Class teak wood well seasoned as shown in drawing & and as directed by the Engr-in-charge.

Chair Dining long back (Drawing No FD-357).

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front legs and S & F new legs made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable side rails of seat frame and S & F new side rails made out of 1st Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable front rails of seat frame and S & F new front rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable stiffeners of seat frame and S & F new stiffeners made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable bottom rails and S & F new bottom rails made out of First Class teak wood well seasoned as shown in drawing & specifications and as directed by the Engr-in-charge.

Computer Table (Drawing No FD/E6/MAP/03).

Removing the broken/ unserviceable drawers and S & F new drawers made out of pre laminated particle board. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for drawers as per existing pattern as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new PVC beading as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing the broken/unserviceable top and S & F the new top made out of prelaminated paticle board as per existing shape, size & thickness as shown in drawing & specifications and as directed by the Engr-in-charge.

Stool Dressing Cushioned

Removing existing unserviceable PU Foams from and provide new foams of 40 density x 75 mm, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal. The cost of Tapestrey cloth not less than Rs.500/- per meter as shown in drawing & specifications and as directed by the Engr-in-charge.

REPAIRS TO STEEL AND TP FURNITURE ITEMS ALMIRAH LARGE STEEL WITH SHELVES (FD-1031)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed.

S & F of shelves as per existing shape and size made out of MS Sheet 1 mm thick including removing old shelves by welding / revetting / cliping complete all as specified or as directed by the Engineer-in-Charge.

S & F of Locks as per existing pattern including removing old Lock complete all as specified or as directed by the Engr-in-Charge.

S & F of Chromium Plated handle including removing old handle complete all as specified or directed by the Engineer-in-Charge.

S&F of Legs made out of 1mm thick MS sheet for Almirah large and welding / reveting / cliping as required including removing old legs complete all as specified or as directed by the Engineer-in-Charge.

Removing existing Unserviceable shutters and S & F new shutters made out to 1 mm thick MS sheet shape and size as per existing or as directed by the Engineer - in - Charge.

ALMIRAH MEDIUM STEEL WITH SHELVES (FD-67/243/1032)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed.

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed.

S & F of Locks as per existing pattern including removing old Lock complete all as specified or as directed by the Engr-in-Charge.

S & F of Chromium Plated handle including removing old handle complete all as specified or as directed by the Engineer-in-Charge.

S & F of Legs made out with 1mm thick MS sheet for Almirah medium and welding / reveting / cliping as required including removing old legs complete all as specified or as directed by the Engineer-in-Charge.

Removing existing unserviceable shutters and S & F new shutters made out to 1 mm thick MS sheet shape and size as per existing or as directed by the Engineer - in -Charge.

CHAIR CB STEEL WITH ARMS (FD-75 (M))

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint by spray painting all as specified in particular specifications and as shown on drawing and as directed by Engineer - in - Charge for the articles of steel furniture.

S & F of 1st class teak wood seat frame duly canned with 2 mm plastic cane including polishing and removing old unservicable wooden seat frame all as specified and directed by Engineer-in-Charge.

S & F of 1st class teak wood back frame duly canned with 2 mm plastic cane including polishing and removing old unservicable wooden back frame all as specified and directed by Engineer-in-Charge.

S & F of PVC rubber shoes for Chair CBA Steel incuding removing old one all as specified and directed by Engineer-in-Charge.

S& F of 1st class teak wood handle polishing on wooden surfaces for Chair CBA Steel including removing old one.

BOOK SHELF OPEN LARGE STEEL WITH SHELVES (FD-69/312)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

S & F Shelves as per existing shape size and thickness including removing old shelves by welding / reverting / cliping as required and complete all as specified and as directed by the Engineer-in-Charge.

BOOK SHELF OPEN SMALL STEEL WITH SHELVES (FD-69)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified in particular specifications and directed by Engineer - in - Charge

S & F Shelves as per existing shape , size and thickness including removing old shelves by welding / reverting / cliping as required and complete all as specified and as directed by the Engineer-in-Charge.

BOOK CASE STEEL (FD - 90M / 1028)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

S & F Shelves as per existing shape , size and thickness including removing old shelves by welding / reverting / cliping as required and complete all as specified and as directed by the Engineer-in-Charge.

S & F of new locks as per existing including removing of old locks all as specificed and as directed by the Engineer -in - charge

S & F of Glass Pane of size 3 thickness as per existing shape and size including removing borken glass and all as specified and directed by the Engr-in-charge.

CHAIR CB STEEL WITHOUT ARMS (FD-75(M))

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint by spray painting all as specified and directed by Engineer - in - Charge

S & F of 1st class teak wood seat frame duly canned with 2 mm plastic cane and polishing on wooden surface of seat frame including removing old one all as specified and directed.

S & F of 1st class teak wood back frame duly canned with 2 mm plastic cane and polishing on wooden surface of seat frame including removing old one all as specified and directed.

LOCKER BED SIDE STEEL. FD-1029

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

S & F of door handles for locker as per existing pattern including removing old one all as specified and directed.

S & F of Hasp & Staple of sizes 75mm long for Locker as per existing pattern including removing old one all as specified and directed.

RACK ADJUSTABLE 6 TIER STEEL (FD-106/1038)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

Removing existing unserviceable Shelves and S & F new Shelves of size and thickness as shown in drawing and as directed by the Engineer-in-charge.

SIDE RACK STEEL 3/4 SPACES (FD-97/371/1023)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

TABLE STEEL 3' X 2' (FD-1007&1008)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint by spray painting all as specified and directed by Engineer - in - Charge

S & F of drawers duly made with 1mm thick MS sheet including locking arrangement all as specified and as directed by the Engr-in-Charge.

S & F new Table top duly made out of 18/19 mm thick pre-laminated particle board exterior grade, ISI marked and fitted with 4mm thick teak wood beading all around the top including removing old top all as specified and as directed by the Engineer - in - charge.

TABLE STEEL 3' X 3' (FD-1007,1008 & 1009)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint by spray painting all as specified and directed by Engineer - in - Charge

S & F new Table top duly made out of 18/19 mm thick pre-laminated particle board exterior grade, ISI marked and fitted with 4mm thick teak wood beading all around the top including removing old top all as specified and as directed by the Engineer - in - charge.

TABLE OFFICE OFFICER STEEL (FD- 1002 & 1003)

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

S & F of drawers duly made with 1mm thick MS sheet with locking arrangement including taking down old unserviceable drawer all as specified and as directed by the Engr-in-Charge.

S & F new Table top duly made out of 18/19 mm thick pre-laminated particle board exterior grade, ISI marked and fitted with 4mm thick teak wood beading all around including removing old top all as specified and directed by the Engineer - in - charge.

S & F of new locks as per existing pattern including removing old lock and all as specified or as directed by Engineer - in - Charge.

S & F new rubber shoes for Table legs as per existing pattern all as specified and directed.

TABLE OFFICE CLERK STEEL (FD- 1024 & 84 (M))

M & L for preparing old painted steel surfaces by removing dents and bends, clipping , welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying one coat of synthetic enamel paint of 1st quality OG / Smoke Grey / Mashroom or as approved paint both inside and outside by spray painting all as specified and directed by Engineer - in - Charge

S & F new Table top duly made out of 18/19 mm thick pre-laminated particle board exterior grade, ISI marked and fitted with 4mm thick teak wood beading all around including removing old top all as specified and directed by the Engineer - in - charge.

S & F of new locks as per existing pattern including removing old lock and all as specified or as directed by Engineer - in - Charge.

S & F new rubber shoes for Table legs as per existing pattern all as specified and directed.

CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220)

Removing old broken long rails from Charpoy and S & F new long rails duly made out by GI pipe 32mm dia, Medium grade all as specified and dircected.

Removing old broken short rails from Charpoy and S & F new short rails duly made out by GI pipe 32mm dia, Medium grade all as specified and directed.

Removing old broken legs from Charpoy and S & F new legs duly made out by GI pipe 32mm dia, Medium grade all as specified and directed.

Removing old broken short rails from Charpoy and fixing another short rails duly made out by long rails obtained from item ser No. 15.01 above including cutting, one end threading and another end welding with MS washer of suitable size complete all as specified and directed by the Engineer - in - Charge.

Removing old broken legs from Charpoy and fixing another legs made out by old long / short rails obtained from item ser no. 15.01 and 15.02 above including cutting, one end threading and another end welding with MS plate 3mm thick of suitable size complete all as specified and directed.

Removing old broken GI Elbow from Charpoy and S & F new 3 way Elbow 32 mm dia with ISI marked all as specified and directed.

Removing old broken GI check nut from Charpoy and S & F new check nut 6 mm thick 32 mm dia with ISI marked all as specified and directed.

S & F of new 12 mm thick plywood top commercial BWR, ISI marked of size 1980 mm x 900 mm and rounded edges on four conrners fixed with GI bolts and nuts 6 mm dia 75mm long with washers 3 mm thick on GI charpoy including removing existing unserviceable plywood 12 mm thick from Charpoy complete all as specified and as directed by the Engineer-in-Charge.

Removing old unserviceable Flat Iron and S & F new Flat iron of size 40 x 5 mm thickness duly welded to Charpoy GI Pipe on both the side all as specified and directed.

CHAIR VERANDAH (FD- 259)

Removing old unserviceable plastic cane from Chair and re-canning with 4 mm wide plastic cane of superior quality (white/cream) after applying one coat of white synthetic enamel paint on duly completed welding works wherever required complete all as specified and directed.

Removing old unserviceable rubber shoes and S & F new rubber shoe as existing pattern all as specifeid and directed by the Engineer - In - Charge.

CHAIR REVOLVING ADJUSTABLE (TP)

S&F new base suitable for caster wheels as per existing shape and size including removing of existing old unserviceable base complete all as specified and directed.

S&F of adjustable mechanism as per existing shape and size including removing of existing old unserviceable adjustable mechanism complete all as specified and directed.

S & F rubber handle as per existing shape and size including removing existing unserviceable rubber handle complete all as specified and directed.

S & F new caster wheels as per existing size and shape suitable for new base including removing existing broken unserviceable caster wheels complete all as specified and dircted.

CHAIR COMPUTER (TP)

S&F new base suitable for caster wheels as per existing shape and size including removing of existing old unserviceable base complete all as specified and directed.

S&F of adjustable mechanism as per existing shape and size including removing of existing old unserviceable adjustable mechanism complete all as specified and directed.

S & F rubber handle as per existing shape and size including removing existing unserviceable rubber handle complete all as specified and directed.

S & F new caster wheels as per existing size and shape suitable for new base including removing existing broken unserviceable caster wheels complete all as specified and dircted.

CHAIR VISITOR EXECUTIVE (TP)

S & F rubber handle as per existing shape and size including removing existing unserviceable rubber handle complete all as specified and directed.

CHAIR REVOLVING

S&F new base suitable for caster wheels as per existing shape and size including removing of existing old unserviceable base complete all as specified and directed.

S&F of adjustable mechanism as per existing shape and size including removing of existing old unserviceable adjustable mechanism complete all as specified and directed.

S & F rubber handle as per existing shape and size including removing existing unserviceable rubber handle complete all as specified and directed.

S & F new caster wheels as per existing size and shape suitable for new base including removing existing broken unserviceable caster wheels complete all as specified and dircted.

Notes for Ser item No 01.00 to 43.04 ; The quoted rates shall be inclusive of following provisions (i) For carrying out the shifting / stocking/transporting/cleaning/receiving/ depositing etc, adequate Labours may please be provided by the Contractor. (ii) All works shall be carried out either at BSO Yard, Domestic/Technical area wherever required as directed by BSO. (iii) All painting work shall be carried out by the contractor with spray painting with spray gun machine. (iv) All old un-serviceable materials retrieved from existing items should be cleaned and taken out from site and disposed off.

SARGAM ENTERPRISES

Vivek Engineers

REENA INDUSTRIES

SHANMUGA TRADERS