Supply, Installation, Testing and commissioning of Fire hydrant landing valves and piping accessories at E.C. Rangreth.

Amount

Note: Contractor should Quote Rates with all taxes.

Supply and Fixing of MS Pipe of size 100 mm. of IS 1239/3589 specs pipe including cutting, welding, supply and fixing of GI/MS Nipples/Reducers, Sockets, Tank Nipples, , etc complete at various locations as under :- C Class Make - Jindal/Prakash Surya

For interconnection of the existing GI Pipeline with Fire Hydrant Landing Valve including red oxide coating and red paint at various locations

Providing and Fixing of below mentioned piping accessories

MS Flanges including Nuts/Bolts Size = 100 mm Dia

Rubber Washers Size = 100 mm Dia

MS Flange (Large Size) - Dia - As required with coupling of Fire hydrant valves.

GI/MS Tee Size = 100 mm Dia

GI/MS Elbow (100 mm) Long size (around 1'6" length)

Earthwork in excavation by manual means in trenches a. For foundation of MS Angle Iron and MS Flat Iron framed Fire Hydrant Cabinets of all classfications including disposal of excavated earth beyond site or as directed at site of work.

Providing and laying of stone soling including watering ramming dressing levelling and consolidation by hand hammer and carriage complete a. For New Fire Hydrant Landing Valves 1 x 2'6" x 2'6" x 0'2" x 20 No.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregrate 40mm nominal size crushed including all carriages complete. For New Fire Hydrant Landing Valves 1 x 3'0" x 3'0" x 2'6" x 20 No. = 450 cft

CMS Framed Structure for enclosure of Fire Hydrant Landing Valves.Structural steel work in single section fixed with connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer including sign boards (as FH Valve)depicting the fire hydrant valve system including red oxide coating and red paint. complete. Steel cabinet with glass door and lock facilities. For 20 New Fire Hydrant Landing Valves

Providing lock to the fire hydrant steel enclosure Make - Thapar

Providing and Fixing of Steel Hinges 4" including welding, fixing, etc complete

Providing and Fixing of Handle 6" Size - 25mm x 5mm

Design, Construction, Testing &Commissioning of RCC Reservoir of 150000 lts. capacity on Turn Key basis including fixing of C-Class MS Pipes for inlet/outlet washout and over flow facilities with contol valves and all necessary accessories such as lightening arrester, water level indicator, RCC/MS stair, man hole covers with frame with locking arrangements, standard pipe fittings etc. all complete including appropriate capacity Pumping and Piping system. The job includes design of reservoir on the basis of foundation bearing capacity of the soil. (The design should be vetted by Design Directorate Srinagar)

Supply and Installation of Non percolating fire delivery hose of 70 mm. Diameter bound with GM couplings (Male-Female) of 63 mm. dia. (IS 636-1988) of 15 mts. Length - 02 lengths for each hydrant with one emergency (short) branch with GM Nozzle compatible with the above Landing Valves for each hydrant. The two fire hoses, the branch pipe and other related hydrant accessories shall be kept in a steel cabinet with glass door with locking facility. The steel cabinets to be kept in close custody of nearest unit holder for security reasons.

Supply and Installation of ABC stored pressure type fire extinguishers MAP90 consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS 13849-1993 finished externally with red enamel paint and fixed to wall with brackets with rawl plug / dash fasteners complete with internal charge for building. With all accessories/fittings as per approved standards a) Capacity 6.0 kg I.S.I marked

Supply and Installation of CO2 fire extinguishers fitted with discharge horn and provided with all accessories/fittings as per approved standards confirming to IS 2878-2004 fixed to wall with brackets with rawl plug / dash fasteners complete with internal charge for buildings a) Capacity 4.5 kg I.S.I marked

Supply and Installation of overload trip off by way of installation of electrical safety equipments outside all the buildings for all the elecrical equipments inside the building

FIRE ALARAM DETECTION SYSTEM

Providing and fixing MS conduit of 16 SWG ISI marked (15:9537-1981, Part-11) complete with all fittings viz. tees, bends, junction boxes, clamps/supports etc. to be concealed in slabs/brick work as required or surface laid. 20mm dia

Providing and laying in PVC conduit PVC insulated ISI marked copper control cable in existing conduit (IS:694) from individual flow switches on each floor to annunciation panel installed in fire control room including sleeves cable clips, supports for horizontal runs etc. complete of size

Supplying, installing, testing and commissioning of following items in real/false/wall in M.S junction box with all installation accessories as per requirement.

i) Analog addressable multisensing detector below false ceiling (Photoelectric sensor for smoke and heat detector) with bases.

ii) Control Relay Module as per the specification.

iii) Addressable type Manual Call Point (Pull Station) as per specification.

PSupplying, installing, testing and commissioning of annunciating panel with Addressable Hooter-cum-Strobe Unit (including control module) having desired control zone and zone indications along with 240 V battery and battery chargr to be mounted on wall surface including supply of all installation material, interconnections, cutting chases on wall and mending good the damages, painting, earthing, complete as required.

Supply Installation Testing and commissioning of hooters

Repairing of Wall of all buildings by way of Paint, Plaster, Cement, etc and making the base for pumps

FIRE TECHNOS

M/S ZAIM ENGINEERS KHANMOH SRINAGAR KASHMIR