Repair to 2 point 5 cusec x 8 mtr Head pump set of unit I and III with allied works at LIS Chung

Repair to 2.5 cusec x 8 mtr Head pump set of unit-I & III with allied works at LIS Chung .

Repair to 2.5 cusec x 8 mtr. Head pump set of unit-I and III with allied works at LIS Chung by way of decoupling the pump, motor and dismantling of pump of 2.5 cusec discharge of unit-I installed at LIS Chung after disconnecting all electrical connections. Taking out pump and motor from the pump room and then carriage to road side with the help of tools, tackles using manual labor. Loading in mechanical transport for shifting to workshop for necessary repairs. Then carriage back in similar manner after conducting necessary repairs. The job includes labour charges, transportation charges (to & fro), loading , unloading and hire charge of tools and tackles required for executing the works. Repairs to 2.5 cusec pump at workshop by way of dismantling and extracting of old and worn out parts i.e. bearings, check nut, gland packing, gland bush, pump shaft, impeller. Repair to impeller by way of brazing, turning and finishing to proper size. Repair to pump shaft of 2.5 cusec discharge pump at workshop by way of re-metalling, turning, threading and finishing to bearing size, cutting of key way and finishing to required size. P/F of new check nuts, gland bush, shaft protection sleeves, impeller wearing ring, bearings as per sample , coupling pulley set and new CI gland packing plate. Assembly of the pump set after complete repairs. Repairs to rotor shaft of 12.5 HP motor by way of P/F of new bearings as per sample (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, P/F of bearing end covers, fabrication and fitting of sleeves 02Nos Complete greasing of the bearings, varnishing and assembling the rotor and stator. Installation of pump at LIS Chung and coupling it with motor after ensuring proper alignment and by P/F of new coupling nuts, bolts along with rubber bushes of appropriate sizes. Also P/F of gland packing, filling of M oil and grease in the bearing housing. The job also involves P/F of gland packing and filling of M oil with grease to unit No. I and III after extracting the old packing and grease at site. The complete job includes cost of material, labour charges and testing complete at LIS Chung. Complete Job

Rebate on Old Parts

G S ENGINEERING WORKS

Rishabh Electricals and Mechanical Works

Rishabh Electricals and Mechanical Works