Old Painted Steel Structures, Power Transformers and equipment painting work at 220kV GSS, Beawar

PAINTING OF STRUCTURE & EQUIPMENTS PAINTING OF OLD PAINTED STEEL STRUCTURES:- Aluminium painting of old painted steel structure at the GSS including supply of paint and painting brush, emery paper, cloth & solvents etc. The surface shall be first cleaned with wire brush/emery paper and thereafter wiped with cloth to remove rust and dust or any other deposits on erected M.S. steel structures. Two coat of aluminium paint shall be applied. Each subsequent coat shall be applied only after the previous coat has dried up. The paints used shall be from any of the following recognized manufacturers, namely Asian/Nerolac/ Berger/Johnson Nicholson

PAINTING OF TRANSFORMERS & EQUIPMENTS:- Enamel painting on power transformer and other equipments including supply of paints and spray painting set, emery paper, cloth & solvents etc. The surface shall be cleaned thoroughly with soda/ caustic solution to clean oily surface and thereafter washing with water. Thereafter two coats of smoke gray synthetic enamel paint shall be applied by spray method. Each subsequent coat shall be applied only after the previous coat has dried up. The paints used shall be from any of the following recognized manufacturers, namely Asian/Nerolac/Berger/Johnson Nicholson. In case of surface area of radiators, those fins will only be considered which are actually feasible and approachable for painting by spray or by brush.

Please Enable Macros to View BoQ information