Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹36.6 L+₹2.5 L (7.21%)Rejected-Finance HOUSE NO 93 WARD NO 8 NEAR ISKON TEMPLE UDHAMPUR J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹37.1 L+₹3.0 L (8.80%)Rejected-Finance OMARA MORH UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹38.0 L+₹3.9 L (11.4%)Rejected-Finance | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹40.2 L+₹6.1 L (17.9%)Rejected-Finance | L5 | Rejected-Finance Being not lowest |
Tender Value
₹43.4 L
EMD Value
₹86,700
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN OF HIGH SECURITY WALL FROM MAIN GATE TO GUARD POST AT HRDC, HQ (NC) UNDER GE (SOUTH) UDHAMPUR
2023_MES_597496_1
CWE/U(S)-33/2023-24
Open Tender
Civil Works
Item Rate
180 days
UDHAMPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
GE (SOUTH) UDHAMPUR
₹86,700
Yes
8 Aug 2023
22 May 2023
24 Jun 2023
22 May 2023
17 Jun 2023
5 Jun 2023
Amount
Dismantling steel poles/struts, any size and refixing the same within a radius of 2m complete all as specified and as directed.
Disconnecting/ taking out existing U/S danaged LT underground cable of any size, complete all as specified and as directed.
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work shall be measured and paid for separately).
1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia suspension GI wire with stranded conductor 6 Sqmm twin core cable flat or circular, complete all as specified.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed.
Plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in coping of poles incl all necessary framework, complete all as specified and as directed.
Modular box mase of FRP/impact resistance plastic & heat resistance, material of suitabe size to accommodate the fixtures with IP-65 connector terminal Bus Bar of rating 100 Amps 4 pole suitable for fixing to pole with suitable of clamps, nuts bolts and painting steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and for laying of cable or pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.
Description all as per Srl item No 8 above but depth exceeding 1.5 mtr but not exceeding 3.0 mtr complete all as specified & directed.
Returning filling in excavated soil in trenches including spreading , levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified & directed by Engineer-in-charge
Removing of excavated soil to a distance n exc 50mtr and deposited where directed at a level not exceeding 1.5 mtr above starting point complete all as specified & directed by Engineer-in-charge
Double walled corrugated (DWC) pipe of size 42 / 32 mm including snap fit coupler conforming to IS:14930 (Pt-II)/IS-16205 Pt-II for protection of HT cable in under ground complete all as specified & directed by Engineer-in-charge.
GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with clamps, bore of pipe 32mm, complete all as specified.
Timer DB of range from 16 A to 110A /230V with analog/digital time switch, IP 54 Degree of protection with locking system suitable for street light fittings complete all as specified and as directed.
On-load change over switch double pole operating at voltage 415, 50Hz with enclosure of capacity 100 Amps all as specified and as directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.
Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in coping, benching and similar work etc including necessary form work complete all as specified and as directed by Engr-in-Charge.
Raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses, in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.
Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engr-in-Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, to obtain rough finished flat surfaces of concrete complete all as specified and as directed by Engr-in-Charge.
RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beam; plinth beams; bases of columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
Use and waste of form work to sides and sofits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc to obtain rough finished flat surface of concrete complete all as specified and as directed.
RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.
Form work to sides of pillars, posts, struts, piers, columns and stanchions etc, square, ractangular or polygonal, to obtain rough finished flat surface of concrete complete all as specified and as directed by Engr-in-Charge.
RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed by Engr-in-Charge.
TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed.
TMT mild steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and includingMS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.
Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.
15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.
Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of suitable primer, complete all as specified and as directed.
Hand packing (any thickness) of broken stone or boulder at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and as directed.
S&F 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, as in weep hole, complete all as specified and as directed.
Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 gde E-165, complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290 Gde-E-165,complete all as specified and as directed.
Preparation of new steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer, complete all as specified and as directed.
Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and strainning and fixing to any type of standrad rails strainning bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire is to be measured )
Concertina coil 600mm dia, 56 loops, 2.5mm core wire, heavy galvanised (wire-275 GSM & Strip-200GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 6.8 Kg/coil, streatchable length 6-8m including securing or tying at crossings with and including provn of galvanised mild steel wire, staples or pins, etc., complete all as specified and as directed. Make:M/S Global Engg/ M/S Special steeld Ltd/ M/S Supper Fence/A1 fence.
khajuria builders
M/S SATINDER PAL & CO.
jyoti parkash sharma
paras ram pachiala
Electromechanics Engineers & Contractors
SINGH CONST CO
BHAGWATI TRADERS
AS BUILDCON
VIRINDER SINGH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .