Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.8 L
Closing Date
4 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TELE JAT
18 conditions · 7 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Work of supply, installation, testing and commissioning of CCTV system using high speed dome/PTZ cameras/Fixed cameras and stand alone/PC based Digital Video Recorders/Network video recorders or AMC of CCTV system using high speed dome/PTZ cameras/Fixed cameras and stand alone/PC based Digital Video Recorders/Network video recorders. Note A1: For the following equipment's a. SDH/STM/PDMUX/IPMPLS/VOIP b. Control equipment c. ISDN/IP based exchange d. CCTV/Video surveillance system e. Integrated security system f. Networking equipment g. Train information display board/ Coach guidance system /IPIS/GPS CLOCKS h. secured communication system at level crossing gates i. VSAT J. MTRC 1. The equipment shall be procured from: a) If there is any RDSO approved source, then the equipment to be procured from the RDSO approved source or its authorized dealer/distributor b) If there is no RDSO approved source but there is TEC approved source, then the equipment to be procured from the TEC approved source or its authorized dealer/ distributor c) If there is no RDSO or TEC approved source then the equipment to be procured from the OEM or its authorized dealer/ distributor 2. Make, Model, Specification of the offered equipment along with OEM authorization if the tenderer is other than OEM shall be submitted along with the tender. 3. MOU with RDSO approved Source or TEC approved source or the OEM, covering Supply, installation, testing, commissioning of system including after sales support required during warranty period shall be submitted along with the tender.
The OEM should have Valid TEC and MTCTE certificate, ISO:9001, ISO:14001, ISO:27001, ISO:45001, STQC certificate, RoHS and EPR certificate at Sr.no. 1,2,3,4,5,7,8,10,14,15 & 16.
Certification for Safety and BIS/CE/FCCCertifications for EMC & Immunity. At Sr.no. 1,2,3, 4, 5, 6, 7, 8, 9, 10, 11& 13
33 conditions · 16 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Upgradation and Provision of RDSO-based VSS (Video Surveillance System) at SVDK Station under Jammu Division.
433_TELE_JAT_12_25-26
433_TELE_JAT_12_25-26
Open
Works - General
4 Months
Jammu, Jammu And Kashmir
₹0
₹3.8 L
4 May 2026
11 Apr 2026
20 Apr 2026
65 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,91,46,536.39 | ||
| — | 100.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Full HD Fixed Dome type IP Colour Camera along with 128 GB or Higher SD Card, Housing & Mount and all accessories required for installation purposes as per RDSO Spec No RDSO/SPN/TC/65/2021,Rev 6.0 or latest. Inspection RDSO | — | — | — | 19,90,003 | |
| — | 22.00 | — | — | ||
| Supply, Installation, Testing &commissioning of Full HD P/T/Z (Pan/Tilt/Zoom) IP Colour Camera as per RDSO spec. No: RDSO/SPN/TC/65/2021 Ver.6.0 or latest. Inspection : RDSO | — | — | — | 14,69,807.46 | |
| — | 14.00 | — | — | ||
| Supply, Installation, Testing & Comissioning of 4K UHD Bullet Type IP Colour camera as per RDSO spec. No: RDSO/SPN/TC/65/2021 version 6 (or latest). All the accessories and fixing materials including mount required for this installation are to be supplied by contractor within the same cost.Material Inspection by RDSO. | — | — | — | 3,91,850.62 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Face Recognition System (FRS) software complete with all accessories, on License per Camera basis for all cameras in item no 03 schedule -A- Quantity - 14 Cameras ) , enabling face recognition across multiple locations (such as stations, RPF Thana and Security Control Room) under the same license, as per Clause No. 19.0 of RDSO Specification No. RDSO/SPN/TC/65/2021 Rev. 6.0 or latest. Inspection by RDSO. | — | — | — | 1,43,780.82 | |
| — | 1.00 | — | — | ||
| Supply Installation, Testing and Commissioning of Server Hardware for Face Recognition Complete with all accessories as per Clause No. 10.1.1.3 Spec No RDSO/SPN/TC/65/2021, Rev 6.0 or latest. Inspection RDSO | — | — | — | 5,97,893.2 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing, wiring & commissioning of external storage for 90 days recording with (Hardware and Software) with minimum 240TB storage capacity with all accessories as per clause 12.0 as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0or latest. INSPECTION: RDSO FOR SUPPLY PORTION" | — | — | — | 20,62,004.42 | |
| — | 2.00 | — | — | ||
| "Supply, Installation, Testing & Commissioning of PC Workstation for Viewing cameras in multiscreen mode, Monitoring and System management and 4K UHD LED Monitor of 24 inch size including all required licensed software's (like OS, MS Office, Anti-virus with 03 years subscription), multifunction device for documentation, accommodate PC workstation & monitor with all accessories, spike buster (minimum 5 nos. 6A points with fuse), 1KVA UPS, Mounting Rack and other required materials as per RDSO spec. No: RDSO/SPN/TC/65/2021 Revision 6.0 or latest. Inspection by Consignee. material should be procured from RDSO approved vender or OEM supporting certificate shall be provided that the material has been manufactured as per RDSO specification attached. INSPECTION: Consignee" | — | — | — | 4,18,931.98 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of VMS Server with all the accessories required for the installation , including one 17 inch FHD Monitor with Keyboard, Mouse, KVM Switch, As per RDSO Spec No RDSO/SPN/TC/65/2021, Rev 6.0 or latest. Inspection RDSO. | — | — | — | 18,16,818.27 | |
| — | 136.00 | — | — | ||
| Supply Installation, Testing and Commissioning of Software for VMS and Video Recording software. (Per camera Licence means Video Management and Video Recording at multiple locations such as Station, RPF Post & DC Server room covered by the same license) as per technical spec and functional requirement as per RDSO Spec No RDSO/SPN/TC/65/2021 Rev.6 or latest. Inspection RDSO. | — | — | — | 8,76,658.72 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Video Analytic Hardware and all accessories required for installation purpose As per Clause No. 10.1.1.2 RDSO Spec No RDSO/SPN/TC/65/2021, Rev 6.0 or latest. Inspection RDSO. | — | — | — | 17,81,603.7 | |
| — | 136.00 | — | — | ||
| Supply of Video Analytic Server software complete with all accessories(License per camera means Video analytic at multiple locations such as Station, RPF Post & Security control by same license) as per RDSO Spec No RDSO/SPN/TC/65/2021 Rev.6 or latest. Inspection RDSO. | — | — | — | 8,66,438.32 | |
| — | 2.00 | — | — | ||
| Supply and Installation of 19" 42 U smart Rack with all accessories like electrical fitting fan patch pannel etc. for housing IP storage Unit. Inspection by Consignee. | — | — | — | 98,099.52 | |
| — | 9.00 | — | — | ||
| Supply, installation ,testing and comissioning of large format High Resolution Video Display unit(55") as per RDSO specs RDSO/SPN/TC/65/2021 rev 6.0 or Latest Inspection by Rites | — | — | — | 5,44,382.64 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Aggregate Switch ( 24x GE SFP ports and 4x10G SFP+) as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest. The Switch must be TTP registered & certified. Inspection Consignee. | — | — | — | 2,35,508.13 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing, wiring & commissioning of Layer-2 managed Switch (24 ports 10/100/1000 BASE-Tports, 4x 1G SFP+ ports) as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest. The switch must be TTP registered & certified. INSPECTION: RDSO. | — | — | — | 1,21,505.08 | |
| — | 25.00 | — | — | ||
| Supply & Installation of layer-2 switch ( minimum 8 +2 manageable ) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 baseX SM SFT port with optical modules complete with all accessories etc. as per RDSO specification no. RDSO/SPN/TC/65/2021 version-6 or latest. The Switch must be TTP registered & certified. Inspection RDSO. | — | — | — | 4,79,888.75 | |
| — | 80.00 | — | — | ||
| Supply AND installation of SFP Optical/Electrical 1 Gbps or 100/1000 Mbps Electrical as required. Make:Cisco, Eoptical or similar suitable for Supplied Switches. INSPECTION: CONSIGNEE FOR SUPPLY PORTION" | — | — | — | 3,26,480 | |
| — | 20.00 | — | — | ||
| Supply and Termination at Wall/RackMountable of 12 Fiber FDMS 12 SC Type FDMS loaded with SC '0' DB & AdaptorSC SM Pigtail 1.5 meters all accessoriesrequired for installation suitable forsplicing and front patching of 12 fibrecable with all accessories and terminating the optical fibre with splicingand front patching in the equipmentroom or placesas required by theRailway representative (OFC patch cordfo and all other materials required forthesplicing are to be supplied by theContractor.[Detailed Specification inTechnical Document]INSPECTION: CONSIGNEE FOR SUPPLY PORTION" | — | — | — | 1,65,955.4 | |
| — | 12000.00 | — | — | ||
| Supply of STP (Shielded Twisted Pair)CAT 6 Cable as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest. Inspection Consignee. | — | — | — | 4,08,000 | |
| — | 12000.00 | — | — | ||
| Supply of 12 Fiber Armored Single mode Optical Fiber ITU - G 652 D. All Dielectric Self Supporting Optical Fiber Cable .Make: FINOLEX, KEC or Better or Similar. INSPECTION:CONSIGNEE. | — | — | — | 2,21,520 | |
| — | 100.00 | — | — | ||
| Supply of optical fiber patch cord FC-FC/FC-PC/FC-SC/LC-SC/LC-LC 10 mtr. Length as per RDSO specification no. RDSO/SPN692007 Mor latest. Inspection Consignee. | — | — | — | 46,412 | |
| — | 24000.00 | — | — | ||
| Supply and Fixing of PVC conduit pipe of 25mm dia conforming to IS: 9537 with suitable couplers and bends as instructed by Railway representative at site. Inspection RITES. | — | — | — | 8,10,720 | |
| — | 6000.00 | — | — | ||
| Supply of power cable 3core 2.5 sq mm multistrand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for railway electrification area shall beof reputed make like Deltonor LAPP or Finolex, or better or Similar. Inspection Consignee. | — | — | — | 2,32,560 | |
| — | 30000.00 | — | — | ||
| Laying of OFC/Power cable/CAT-6 cable PA Cable/Data cable and all the other types of telecom cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing various components and system integration. This work needs to be done as per Railway Site Engineer. All materials for jointing and termination of power cable/CAT-6 cable as per site requirement are to be supplied by contractor. This item also includes supply and installation of power board with 4 points (3 no's 5-amp sockets and 1 no's 15 Amps socket) as per site requirement. | — | — | — | 7,89,600 | |
| — | 20.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Panic Switch (IK10 and IP 66 Rated) with Mushroom Cap Push-Button in Red Color,DPDT contacts 2 Amps , Stainless Steel FacePlate with GI Junction Box of suitable size and flasher cum strobe of min. 100dB including fixing arrangements and suitable protection and all accessories required for installation on each platform at stations or as per site requirement .Inspection RDSO | — | — | — | 98,854.6 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Testing & commissioning o f online U P S 1 0 kVA, as per RDSO specs RDSO/PE/SPECS/PS 0023-2001(REV-0) Amdt 4 or latest 1 hours back up for this work required load . Inspection By RITES. | — | — | — | 11,15,611.36 | |
| — | 6.00 | — | — | ||
| Excavation of cable trench of 300mm wide and 800mm deep as per approved cable route plan on concrete platform/pukka surface/Track/Pitched/stone/Rocks/ Brick paved surface/chiseling/ blasting of rocks and back filling after laying of HDPE Pipe/Telecom cable, ramming of the soil in trenches and consolidation of soil & restoration of surface. This also includes clearing of temporary obstruction on the selected routes. | — | — | — | 6,10,459.02 | |
| — | 6000.00 | — | — | ||
| Supply of PLB-HDPE duct outer diameter 40 mm & inner diameter 33 mm as per RDSO/SPN/TC/45/2013, Rev. 2.0, Amendment 1-3, or latest with all accessories as described in RDSO specifications. As covered in the specifications, two nos. each of end plug, cable sealing plug and end cap shall be supplied along with each coil along with adequate no. of plastic couplers (No. of couplers to make a continuous length of the lot + 10% extra) shall be supplied along with each lot including one number of Duct cutter, C spanner and chamfering tool shall be supplied along with each lot of 100 coils. Inspection RDSO/RITES | — | — | — | 3,62,760 | |
| — | 2.00 | — | — | ||
| Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/RDSO/E&B/001 dtd.19.09.08(attached as Annexure-A). It consists of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. © Copper strip of 200x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 200x25x6mm = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate (minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS:694 for connecting various equipment's to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO. | — | — | — | 30,107.58 | |
| — | 2.00 | — | — | ||
| Installation of Unit Maintenance Free Earth as supplied under item no. 13.3 of Chapter 13 of SOR . It includes ( i ) Digging the earth tothe required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 200 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 micrones to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 200 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar,copper strips of 200 mm x 25 mm x 6 mm sub equippotential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installations of this item shall be carried out by the contractor as per RDSO Specn. No.RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.S DO/RDSO/E&B/001 or latest. Earth to be installed and commissioned as per TAN and OEM or authorized vendor will give commission certificate for commission of Maintenance Free Earth. (Also refer to TAN attached).Inspection: Consignee | — | — | — | 13,501.8 | |
| — | 500.00 | — | — | ||
| Supply and connecting of STP RJ 45 Connectors Make D-Link, AMP, DAX, Legrand, Molex or Digilink. INSPECTION: CONSIGNEE FOR SUPPLY PORTION" | — | — | — | 6,320 | |
| — | 4.00 | — | — | ||
| Supply of single mode single fiber 10G SFP+ module compatible with switches. INSPECTION: CONSIGNEE. | — | — | — | 12,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Earthing
ATTACHMENT
IRGCC2022ACS7-10.pdf
ATTACHMENT
IRGCCApril2022andcorrectionSlip.pdf
ATTACHMENT
SpeicalconditionsofworkSignal.pdf
ATTACHMENT
SpecialconditionTelecomm.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf Standard Tender Documents with correction
ATTACHMENT
RDSOSPNTC652021V6Amdt1.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf
ATTACHMENT
2025-07-01-TAN3006ver3.1finalissued_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .