Street light Arrangement of Sani mandir to Mahindra Green woods Jatkhedi, Bhopal

Amount

as per as tender document

1000006006-11 kv Pin (polymer) disc insulator

3000002022-D.O. fuse 11 KV Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure. 11 KV as per MPPWD SOR

3000002499-11 KV Lighting Arrestor Supply and fixing 11 KV lighting arrestor (Polymer with all required accessories).

3000003611-100 KVA transformer Supplying, installing, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T. side, hand operated off load Tap changer switch above 100 kVA, oil conservator with drain valve, plug 63 KVA and above, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required as per IS specification. Marked ISI & 3 Star rating. Aluminium wound 100 kVA as per MPPWD SOR.

3000002463-Supply & fixing of XLPE 1 core Unarmoure 150 sqmm Aluminium conductor cable of 1100 volts (AS per MPMKVV specification and approved make)

3000002025-Spring loaded bus Supplying & fixing of Spring loaded bus bar screw less connector with enclosure of approved make including required clamps, nut, bolt, connection, testing as per specification to complete the job. Single Phase 1Ph, 1In+3Out

1000006004-11 kv Pin insulator (polymer)

3000003705- DTR energy meter Supplying & installing totally enclosed 3 phase meter box of suitable pattern as per MPSEB requirement, fabricated with 16 SWG MS sheet duly painted with 2 coat of red oxide primer and 2 coat of synthetic enamel paint, suitable space to accommodate LPR type LT meter with CT's/HT trivector meter, providing required mounting plate/strip for energy meter, TTB & CTs, glass window for meter reading, incoming/outgoing cable, connection with proper size of lugs, earthing terminals etc. complete with all materials including providing, installing, testing/calibration from MPSEB (testing/calibration charges of meter and CTs will be bourn by agency) and connecting the following meter: CT operated 3 Ph. 4 Wire, 0.5 accuracy class LT DTR energy meter with LPR feature including GSM, modem etc. with 4 No. resin moulded 100/5 or 200/5 or 300/5 ratio LT CT as per MPHBSOR.

3000003706-fencing of chain link mesh Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided up to 2.00 mt. apart or as required with required angle iron/ flat iron members /cross members for frame between the post & welded mesh including cement concrete, excavation of pit and refilling the same . The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

3000003626-LT XLPE Air Bunch Cable Supplying & drawing / laying of PVC insulated XLPE Aerial bunch power cable conductor H2/H4 grade Aluminium Solid/stranded confirming to IS-14255- 1995, Alu. Alloy insulated messenger 1100 volts grade cable of approved make in Air with necessary material as per specification of required size as 3x35 Sq.mm, 1x16(St.Light), 1x35( Insulated neutral messenger)

3000002029-Tension clamps(Dead end) Supplying & fixing of Aerial bunch cable accessories Tension clamps(Dead end) i/c required attachment for single core cable of approved make in Air with clamp, necessary material as per specification for required size.

3000001215-Clamp for Neutral Supply and installation of Clamp for Neutral

3000001218-Piercing connector type-II Supply and installation of Piercing connector type-II fo single phase/three phase

3000001217-Piercing connector type-I Supply and installation of Piercing connector type-I for Single Phase/three phase

3000000981-Street lights for a load of 45 KW For Street lights for a load of 45 KW a) 3No. 95A (10kA) 415 Volts SPN MCCBs b) 3No. - 150 Amps 415 Volts porcelain rewirable cutout. c) 1 No. - GSM System as per specifications d) 1No. - 3 Phase AC3 rating 95 Amp. power contactor. Complete with internal wiring with fiexible copper wiring, din rail, terminal strip and GSM System as per specifications and other materials as required. All the switch gears with all required for complete work must be of L&T seimens ABB Schneider make only

Bidder Name

Amount

SIDDHI VINAYAK ELECTRICAL

MAA SHARDA ELECTRICALS

MAA SHARDA ELECTRICALS

MAA SHARDA ELECTRICALS