ADDN / ALTN TO CANDIDATE MESS IN SCN FOR 300 CANDIDATES AND OTHER SANCTIONED WORKS UNDER GE (WEST) JALANDHAR CANTT

Amount

Surface dressing n exc 15 cm deep getting out in Soft / loose soil complete all as specified and as directed.

Excavation in trenches in soft/ loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, laying of under ground cable etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

All as Srl item No. 02 but additional 1.5m or part thereof in depth beyond the first 1.5 m

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Material and Labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.complete all as specified and directed.

Removing excavated material up to a total distance 250 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for TMT bars 10 mm dia and over cut to length , bent to shape required, including cranking bending and binding with annealed wire not less than 0.9 mm dia complete.

TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC M-25 grade using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. (rough finished surfaces of concrete)

M&L for RCC Type B0 1:2:4 (12.5mm graded stone aggregate) nominal mix in Chajjas complete all as specified and as directed

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) nominal mix as in precast RCC manhole / septic tanks covers ,drain,cover etc including all form work and setting in CM 1:4 all as specified

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in alternate panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement in any position complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F for 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

All as per Srl item No. 24 above but for 20mm bore tube

Supply and fixing pillar tap, fancy type, CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S&F vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

S&F brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified

S&F 15mm stop valves/Angle cock , chromium plated fancy type, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions

Supply and fixing aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Material and labour for 5.5mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework complete all as specified.

Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.

S&F 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

M&L Granite work 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S & F 4 mm thick of size 600x600 mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer E-Board Classic to be fixed on GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed.

M & L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for Complete removal of existing treatment on wall and applying Two coat of Oil distemper (white or tinted) one coat of thin layer of putty (minimum 1mm) on plastered surfaces, prepare to distempering on walls etc (Surface finished even and smooth) complete all as specified and as directed

M&L for Complete removal of existing treatment on wall and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M & L for 40 mm thick Damp proof course in Cement Concrete 1:2:4 type B 0 in horizontal/vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum /sqm complete all as specified and as directed

M&L cement concrete 1:4:8 type D2, using 40 mm graded aggregate in foundations, filling mass concrete etc complete all as specified.

M&L Salt glazed stoneware drain pipes, grade “A’ with collars with bore of pipe 200mm complete all as specified and as directed by Engr-in-charge

Material and labour for cutting into existing manholes for connecting new drains, making good to open and rendering, cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth (200 mm bore pipes) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish off the premises

M&L coloured glazed ceramic tiles (450x300) x7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 10 mm thick cement plaster in CM 1:4.

M&L vetrified ceramic tiles 10mm thick light shade (square/rectangle) polished area of each tiles n exc .36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6

M&L vetrified ceramic tiles 10mm thick light shade (square/rectangle) polished area of each tiles n exc .36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM 1:4

M & L for Machine cut kota stone slab flooring 20-25mm thick(minimum 550X550 mm size) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and rounding of edges . Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations including 15 mm thick screed bed cement mortar 1:6 complete all as specified and as directed

All as per Srl item No. 57 above but on vertical surfaces such as skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed

S&F Stainless steel sink made out of sheet 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified.

M&L roof trusses(framed), trussed purliins, crane gantries, rails and fastenings and heavy bracket framing(beam,tee,angles,channels or flat sections, including distance pieces, cleats etc Fe-410-W(Gde-E 250 quality A) complete all as specified and as directed by Engr-in-charge

M&L Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red-oxide primer exceeding 10 cm width or grith complete all as specified

S&F pre-painted galvalume, aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for PCC 1:3:6 type C1 (20 mm graded aggregate) in foundations, filling and mass concrete all as specified and directed

Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engr-in-charge

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.00 sqm each all as specified.

Providing & fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 100 mm x 50 mm Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by " RAJSHRI " an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length including PCC 1:2:4 B0 around hold fasts/fasteners and aking good in all respects, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company

Providing & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125 mm x 65 mm Double Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length including PCC 1:2:4 B0 around hold fasts/fasteners and aking good in all respects all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.

Providing & fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with and including SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube including Other hardwares like 150 mm Heavy duty SS Handles, 300 mm SS heavy duty tower bolts and 01 mortice lock (Make: Godrej/Dorset) should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

Providing & fixing factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws including Other hardwares like 200 mm SS Handles, 300 mm SS heavy duty tower bolts and 01 mortice lock (Make: Godrej/Dorset) should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings..Material test certificate and authentication should be compulsory provided by the manufacturing company.

Dismantling wall and ceiling board, fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as direced by the Engr-in-Charge

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as directed by EIC.

S&F PVC Wall Lining consisting of 5mm thick Solid Plain colour PVC sheet but single side prelaminated PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed by EIC. (Note : To be matched with exisiting colour of the panelling)

M&L aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as spd and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.

S&F Aluminium composite sheet panels 4mm thick including necessary joining cleats, glazing clips, rubber neoprene packing, for fillingg in frames of partitions and doors including all necessary fittings etc. complete all as specified.

S&F sheet glass 4.8 mm thick ordinary quality to be fixed in aluminium frame work in square exc 0.5 sqm in each pane

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section round the opening, all complete as per requirement and direction of Engineer in-charge.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete work finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered/unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates ) as in foundation, filling and mass concrete of post complete all as specified .

S&F rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W gde-250 quality -A complete all as specified and directed by EIC.

M&L Reinforced cement concrete Type B1 1:2:4 (Nominal Mix) using 20 mm graded stone aggregate as in foundation including raft footing ,bases for column ,etc complete

M&L Reinforced cement concrete Type B1 1:2:4 (Nominal Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers,posts and struts including 10mm thick plaster complete

M&L Reinforced cement concrete Type B1 1:2:4 (Nominal Mix) using 20 mm graded stone aggregate as in lintels over 1.5m clear span, beams and cantilevers complete

M&L Formwork to sides of concrete fdns, footings, bases of columns, sides and soffits of plinth beams and similar works for rough finished flat surfaces.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions Square or rectagular on plan for rough finished flat surfaces.

M&L Formwork to sides and soffits of bands and beams for rough finished flat surfaces of concrete for rough finished flat surfaces.

M&L Formwork to sides and soffits of chajjas for rough finished flat surfaces of concrete for rough finished flat surfaces.

Supplying and fixing steel windows/ ventilators 1.25mm thick box type (primer coated) ERW hollow ‘P’ Section of size 60m x 25mm single rebeated comprises of gauged skelton shutter EWR Sec 50mm x 20mm and 1 mm thick two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullian of EWR box ‘T’ Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1. Four Nos for each window including following fittings welded to frame of shutter :- (a) Hold fasts 150mm long 12mm x 3mm made to shape- 04 Nos per window (b) Handle of Z sec 20mm x 25mm, 100mm long- 01 Nos per leaf (c) MS tower bolt 150mm long 02 Nos per leaf (d) Z Sec 20mm x 25m, 100 long stopper- 01 Nos per leaf (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges -01 Nos per leaf (f) MS pintal hinges of size 75mm x 12mm – 02 Nos per leaf (g) Fabrication and fixing arrangement as per drawing no - CEJZ/TD-1020/08 Sheet 1/3 to 3/3 (Note:- Grill/ gaurd bar, wire mesh/ Glass panes shall be measured and paid separately.

All as per item no 90 here in before but window/ ventilator with glazed shutters. As per drawing no – CEJZ-1019/08 Sheet 1/3 to 3/3

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads/aluminium beadsetc in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

Removing surplus spoil to a distance n.exc 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for three coats of colour wash on newly plastered surfaces of wall including preparation of wall surfaces complete all as specified

Material and labour for hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material and labour for cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and directed

Supply and fixing structural framed work as in doors or gates of angle or other section with gusset plates, rails,bracesetc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end incl either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality A, complete including two coats of synethic enamel paint over a coat red oxide primer complete all as specified and directed

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors

Taking down main switch / DB as directed by Engineer-In-Charge.

Taking down unserviceable submain/ cable of any size as directed by Engineer-In-Charge.

M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour for followings:- (a) One 3 pin socket outlet, 5Amps, independent with other switch

(b) one 3 pin socket outlet 5 amps on same board with other switches.

One light /fan/call bell point controlled by one one way switch as directed engineer-in-charge

M & L for concealed point wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour all as specified and directed for:

Supply and fixing switch piano, flush, single pole, one way 16 amps

Supply and fixing socket outlet 3 pin, 16Amps, flush type

supply and fixing switch piano, flush type single pole, one way 6 Amps

supply and fixing piano flush socket 1 way 6 amp

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

Supply , installation & commissioning MCB Load Distribution board VTPN 4 way double door, for mounting MCCB/DP/ SP/TP/ MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed at site .

supply and fixing SHEET METAL ENCLOSURES FOR DB'S SPN WHEN MCBs TO BE USED 12 way double door for mounting DP/SP/TP/MCB/ as incoming /outgoing. The DB shall be of IP-43-IK with metal door complete as specified and directed at site

Supply and Fix MCCB 4 pole adjustable type 100 Amp, 50 Hz, 415 V with rupturing capacity 36 KA.

Supply and fixing sheet metal enclosers for DBs Double door SPN 4 Way 240 volt with 200 amps rated bush bar

S & F 415 volts,10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commisioning (i) TP 25 to 63 AMP

(ii) SPN 40 to 63 AMP

(iii) MCB SP 6-32 Amps 240 volts

S&FSingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A

M & L for sub main wiring with TWO core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of one run 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. Two runs of cable and one run of conduit shall be measured as one unit)

M & L for sub main wiring with TWO core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (two runs of cable and one run of conduit shall be measured as one length)

S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing recess /ceiling mounting LED light 2X2 36 watt cool white light of 6500k complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M & L in repair for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4.0mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and directed .

Supply and fix ceiling fans AC single phase 230V, 50HZ, copper wound of 1200mm sweep, with BLDC technology, max power input upto 26 to 32 watt, copper wire motor with 5 star BEE ratings, minimum air delivery 210CFM with service value 6.00 BEE, complete along with canopy cover cover and remote control, down rod, U clamp, electronic regulator 2 module, type 450 watt, heavy duty incl connection, and accessories, including connecting electric connection from ceiling rose to connector of ceiling fan with PVC insulated PVC round sheathed, flexible cable with stranded copper conductor 3 core of size 23/0.0076, complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge oven baked with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified size 28" x 78"

Supply and Fix Water Heater storage type 5 star rated, electric operated, 25 Ltr capacity 230Volt AC Supply with PVC Connection pipe Superior quality (HOT & Cold water ) including Plug top 15 Amp complete with necessary water connection and electrical connection, incl taking down existing Geyser any make/type/capacity and depositing to AGE E/M (W) store yard complete all as specified and directed.

Supplying, Laying, jointing and testing LT underground XLPE insulated, armoured, heavy duty electric cable PVC sheathed with stranded aluminium conductor, 1100 volts grade of size 25 Sqmm 4 core, laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed. Note : Excavation & earthwork, sand cushioning, brick protection cover, GI protection pipe and clamps shall be measured and paid for separately.

M&L for Sand cushioning to under cable or in foundations including consolidated with plate vibrator before and after laying of paver block including watering , ramming etc complete all as specified and directed.

Supply and old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, abutting each other complete all as specified and directed.

Making / boring hole under road /pavement /hard standing with the help of bookies for passing LT cable/pipe any type upto not one mtr below ground level including required earth work

Supply and lay pipe galvanized "medium class" including fitting 40 mm(3/2") dia.

Supply and lay pipe galvanized "medium class" including fitting 20 mm(3/4") dia.

Supply and fix for 20 mm(3/4") dia pipe Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fix

Supply and fix for 40 mm bore pipe Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fix

M&L for drilling and tapping cast iron water mains for branch connection of internal dia

M&L for construction of bricks mansonry valve pit of size .60x.60x.60 mtr including earth work and exacavtion in any type soils and disposal of surlus soil to a distance not exceeding 50 mtr away from site including 15mm thick plastering in cement mortar (1:4) and flush pointing on brick work externally as work proceeds in the same morter with angle iron frame 40x40x6 mm hold fast ms sheet cover 3.5 mm thick handle hinged to frame and locking arrangement including black synthetic enameled paint over a coat of red oxide primer including dismanting existing pit complete all as specified

M&L for run lead joint including provision of spun yarn for spigot and socketee CI pipe/fitting of size 100 mm bore completed all as specified

NATIONAL BUILDERS (BID ID -3169378)