Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC 1252 SECTOR 15 PANCHKULA 134113 | PANCHKULA | HARYANA | 134113 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹34.7 L+₹91,285 (2.70%)Rejected-Finance | L2 | Rejected-Finance Not being Lowest | |
| 3 | L3₹34.8 L+₹92,850 (2.75%)Rejected-Finance 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L3 | Rejected-Finance Not being Lowest | |
| 4 | L4₹37.9 L+₹4.1 L (12.0%)Rejected-Finance W 701 HARBHAJAN VIHAR AWHO SECTOR 14 SAS NAGAR MOHALI PB 140307 | S A S NAGAR | PUNJAB | 140307 | L4 | Rejected-Finance Not being Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
CA NO. GE/CHM-82/2022-2023 REPAIR AND MAINT OF BLDG OF ASC SUPPLY DEPOT, ESM HOSTEL, AFT, TANK TCP, CWE OFFICERS MESS AND LADAKH SCOUTS UNDER AGE B/R II CHANDIMANDIR
2022_MES_567479_1
GE/CHM-82/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
Garrison Engineer
₹80,000
Yes
31 Jan 2023
5 Dec 2022
9 Jan 2023
5 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete in any position not specifically provided for, complete all as specified and directed.
Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40m graded crushed stone aggregate) as in sub base flooring, finished even and rough to receive top layer, all as specified and directed.
Reinforced cement concrete 1:1½:3 (nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, all as specified and directed .
Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Material and labour mild steel TMT bars 5mm dia and over upto and including 8mm dia, cut to length, bent to shape required, including cranking, bending spirally including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips as in stirrups, spacers and binders , all as specified.
Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed.
Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.
Double charge Coloured vitrified ceramic tiles, jointless 8-10mm thick (square ) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per Srl item No 12 but on vertical surfaces over 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.
Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Rendering 10mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, chajja,facia,or similar positions , finished fair and smooth complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over and inluding 15mm thick rendering in cement and sand mortar 1:4 including taking down existing plaster for multi storey building over cement plaster / stone surface, including necessary scaffolding work, all as per manufacturer instructions complete all as specified and directed.
Complete removal of existing treatment of any type from plastered/unplastered surfaces of wall,chajja,facia, cantilivers of RCC with mechanical means/grinder completely, preparing the surfaces by filling the cracks/knots/depression with epoxy crack filling compound and applying two coats of weather resistant exterior emulsion (100% acrylic) over a coat of primer including necessary scaffolding and safety arragements , complete all as specified and directed.
Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of not less than 2mm thick (in two coats) over and including a coat of wall primer, smoothening the surfaces with sand papers etc.and applying two coats of oil bound distemper using hand roller, complete all as specified and directed.
Preparation of old surfaces of walls and applying one coat of oil bound distemper , complete all as specified and directed.
Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed.
Dismantling wall and ceiling boarding of any size/description, fixed in any position , complete all as directed.
Factory made solid PVC board 16-18 mm thick as in kitchen cabinet/ cupboard panel,sag free thermal and electrically insulated, light weight wrap free, chemically resistant and smell free, fixed with screws, complete all as specified and directed.
Continuous (Piano) hinges of size 40mm (width of flap when open) of mild steel ,fixed in repairs, complete all as specified and directed.
40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished , fixed in repairs, all as specified.
Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Solid PVC frame having profile 75mm x 50mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density not less than750Kg/ cum, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws , complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Solid PVC frame having profile 125mm x 60mm , one or more rebates, made out of solid PVC foam with homogenous fine cellular structure having density not less than750Kg/ cum, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws , complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
35mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides as in cupboards, etc. complete all as specified and directed.
35mm thick Glazed and skeleton shutters of second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, all as specified and directed.
Supply and fix, as in repair, steel window, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes four Nos. for taking down the window ,making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 40 hereinbefore but window without glazing bar.
Factory made box type steel ventilators, openable with top hung shutters with box type hinges including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed in repairs, complete all as specified and directed.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , all as specified.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , fixed in repairs, all as specified.
200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.
150 mm aluminium handles cast type complete all as specified and directed.
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of Pink primer complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)fixed as in repair with ‘P’ or ‘S’ trap, and making good the disturbed surfaces and to match with existing surface,fixed in repairs, complete all as specified.
Chromium Plated jet spray with PVC tube for EWC including brass head screw and suitable washer, fixed in repairs,complete all as specified and directed
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement, fixed in repairs, complete all as specified and directed.
White PVC valveless flushing cistern (Dual type) of capacity 10 litres, syphonic action , low level with inlet, ball valve, float, handle, PVC connection & 32mm dia CP flush pipe (long type for squatting pan) incl brackets, as in repairs, complete all as specified and directed.
Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including waste coupling, angle brackets, PVC waste pipe, fixed as in repairs, complete all as specified and directed.
Bib taps brass, fancy type, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repairs , complete all as specified and directed.
15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.
Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks, framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165, fixed in repairs, all as specified and directed.
PVC (SWR) floor trap 75mm bore, plain with grating incl jointing with solvent cement, fixed in repairs,complete all as specified and directed.
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair compelte all as specified and directed.
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors including necessary fittings,sealant etc ,fixed in repairs ,complete all as specified and directed.
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors etc including necessary fittings,sealant etc ,fixed in repairs, complete all as specified and directed.
110mm bore PVC (SWR) bend any radius,fixed in repairs, complete all as specified and directed.
75mm bore PVC (SWR) bend any radius,fixed in repairs, complete all as specified and directed.
Grating doom 100mm dia of PTMT with waste hole (min weight 40 grams), fixed as in repairs, complete all as specified and directed.
75 mm dia PVC (SWR) junction single ( single T ) equal or unequal, fixed in repairs, complete all as specified and directed.
500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) triple layered , hoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed.
Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs of mud stops, rounded or chamfered on edges including necessary form work, complete all as specified and directed.
PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) , 50mm thick average thickness, as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. NOTE : (water proofing compound to be measured and paid separately)
Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement, all as specified and directed by Engineer-in-charge.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.
Power coated aluminum anodized frame/ chowkhat for doors, windows, partition etc (thickness or powder coating of any colour not less than 30 micron) with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, complete all as specified and directed Note : (i) Glazing / gauzing shall be measured and paid sapartely . (ii) Items shall be paid as per weight of a section as indoor frame and frame of aluminum partition/ doors/ windows / ventilator/ shutter (iii) The rate quoted shall be inclusive of neoprene beading , aluminium snap beading, glazing clips, cleats, screws, roller and locking arrangement. (iv) Door closer shall be measured and paid separately
4mm thick tinted/frosted sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified and directed.
Aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg ,complete all as specified and directed .
100mm size 4 Levers, brass, mortice Lock, vertical type, complete all as specified & directed by Engineer-in-charge.
False ceiling in repair with powder coated exposed Gl grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmx600mm. Grid of modular size 600mm x600 mm shall be supported by 4mm dia Gl wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board (Density>1200 Kg/Cum) of size 595mmx 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part-4, 5, 6,7 & 8 complete all as per manufacturer's instruction. (Make:- Everest or equivalent as approved by GE)
Dismantling any type corrugated or semi corrugated sheets as in roof covering incl. ridges & removing from site complete all as specified and directed
Rolled mild steel as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming toFe 410 -W (GdeE- 250) quality A, fixed in repairs, all as specified .
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Looking mirror of size as ordered, 4.80 mm thick best quality, mounted on 6mm thick plywood, fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed.
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications , fixed in repairs, all as directed. Note:- PVC frame shall be measured and paid separately.
5mm thick PVC sheet fillet of width 35mm to make PVC frame for wall panelling inclusive of fixing on to wall in repairs, complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
Wash hand basin central hole basin mixer , chromium plated with regular spout and pop up waste system, 450mm long braided hoses , suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Cast copper alloy, chromium plated wall mixer , fancy type, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Vitreous china, pedestal type, wall mounted one piece compoite closet type, pastel colour including seat cover complete all as specified and directed. MAKE : HINDWARE Cat Part No 92088(Element), Colour : Pastel or equivalent in CERA / PARRYWARE
Vitreous china, table top wash hand basin, pastel colour including waste coupling and waste pipe complete all as specified and directed. MAKE : HINDWARE Cat Part No 91036 (68 x42) Cornice or equivalent in CERA / PARRYWARE
Machine pressed Concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning including dismantling of old blocks, complete all as specified and directed
Factory made precast kerb stone of size and shape as ordered, set and jointed in CM(1:4) including necessary excavation, all as specified and directed.
32mm dia, 900 mm long PVC waste pipe for wash basin, sink , urinal etc, fixed in repairs, complete all as specified and directed .
PVC connection 15mm size with PTMT nuts of length 450mm long, as in repairs complete, all as specified and directed.
16-18mm thick black granite slab, table rubbed and polished (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed table top, cooking platforms , wall lining and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:6, complete all as specified and directed.
Supply only Doctor fixit LW+ water proofing compound complete all as specified and directed
Material and labour for providing wooden laminated flooring with bruce locking system having surface abrasion class AC-3 and density 920 Kg per Cum, of size 1215mm x 194mm x 8mm thick having fire rating class B1, fixed as in repair complete all as specified and directed. MAKE : ARMSTRONG/ VISTA / PERGO
M/s Om parkash
M/S Gupta and Sons
M/s Hari Om Engineer and Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .