8298/E8

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete ( Un-reinforced) in ground floor or pavings n.exc 15 Cm thickness ( below or above ground level) complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling stone slab or tiles of any description and thickness laid dry or laid dry and pointed complete all as specifieda nd as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Material and Labour RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slabs for manholes / gully traps / drain etc set in cement mortar (1:4) complete including necessary form work complete all as specified and directed. Note: Necessary form work shall deemed to be included in quoted rates.

Material and Labour RCC 1:1.5:3 ( nominal mix) type A1 ( using 20mm graded crushed stone aggregates) as in coloumn, pillars, piers, posts and struts complete all as specified and directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 20 mm graded crushed stone aggregates) as in foundation , filling and mass concrete complete all as specified and as directed.

Material and Labour Plain cement concrete 1:2:4, type B2(using 40 mm graded stone aggregate) as in surface channel and drain etc complete all as specified and directed.

Material and Labour Plain cement concrete 1:2:4, type B0(using 12.5 mm graded stone aggregate) as in benching and coping etc complete all as specified and directed.

Material and Labour Factory made Kerb stone of any pattern and design of size 300mm x300mmx 80mm thick including taking out old unserviceable Kerb stone complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as above Item No.14.00 here-in-before but except bricks. Note:- Servicable bricks will be obtained from Item No. 1.00 mentioned here-in-before.

Material and Labour Brick work with fly ash bricks of designation 7.5 as in half brick thick wall straight or curved on plan of any radius, built in cement mortar 1:4 complete all as specified and directed

Materials and Labour Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply only PVC coated MS galvanised Chain link fencing with straining bolts and binding wire complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fix Mild steel angle iron post, struts for holding chain link fencing including all necessary drilling holes, fixed in position etc and similar work confirming to Fe-290, Gde E -165 complete all as specified and as directed.

Supply Only Mild steel 10mm dia round bar including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply & fix Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165complete all as specified and directed by the Engr-in-Charge.

Supply and fix Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel TMT bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Materials and labour 100 mm thick, plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in paving and path and hardstanding , finished the surfaces even and smooth without using extra cement complete as specified and directed.

Materials and labour 75 mm thick, plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base complete as specified and directed.

Materials and Labour Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Materials and Labour 60mm thick Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed including 50mm thick sand filling below paver block complete all as specified and as dirceted.

Materials and labour Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 and surface finished even and smooth without using extra cement including mixing water proofing compound as per manufactturer's instrauctions complete all as specified and directed by Engr-in-Charge.

Materials and labour Rendering 15 mm thick on other than fair faces of brick or concrete surfaces in CM 1:4 and surface finished even and smooth without using extra cement including mixing water proofing compound as per manufactturer's instrauctions complete all as specified and directed by Engr-in-Charge.

Materials and LabourCement based paint ( Weather coat) paint of any colour / tint, two coats over a coat of primer on newly plastered external surfaces including necessary preparation of surfacescomplete all as specified and as directed.

Material and Labour Synthetic enamel paint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and directed.

RANJIT KUMAR HALDER

M/S BISWANATH BHATTACHARJEE

BURO ENTERPRISE

JHAWAR SUPPLIERS