SPECIAL REPAIRS REPLACEMENT OF LT POLES LED STREET LIGHT AND CONNECTED WORKS FROM STATION MESS TO POST NO P1042 PEER BABA TO MORA GATE AND PROVISION OF LED STREET LIGHT AT VARIOUS PLACES AT INS TUNIR AT NAVAL STATION KARANJA

Amount

Dismantling existing Octagonal GI pole/ Steel pole taking down carefully for reuse, making good disturbed surfaces & reinstallation of the same at other location as directed by Engr-in-Charge complete all as specified and directed.

Demolition of cement concrete i.e coping & foundation for all street light poles mentioned at Ser item No 1 complete all as specified.

M & L for RCC foundation with grade of 1:2:4 for each Octagonal GI Pole including steel rods/ foundation nuts & bolts of suitable size and Base plate of size 220 x 220 x 12 mm alonwith shuttering as per manufacturer design and specifications complete all as specified and directed. Note :- RCC foundation required for each Octagonal GI pole = 1.7 x 0.45 x 0.45 = 0.344 cum

Taking down and dismantling existing old unserviceable street light any type/wattage and stacking properly at location as directed by Engineer in charge.

S & F Pressure die cast aluminium housing with toughened glass and individual high LEDs with secondary optics LED street light luminaires with IP66 , 100 Watt & accessories of LED life 5000hrs including surge protection and 2.5 sqmm twin Core copper conductor cable connecting upto inbuilt terminal box complete all as specified and directed.

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft/loose soil including taking out faulty cable/cable, cable covers and GI pipe complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point all as specified & directed.

M & L for stone dust sand as sand cushioning for protection of UG cable including punning of sand in layers all as specified & directed.

Supply & laying un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm all as specified & directed.

Supply & fixing in repair, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts of following sizes including taking out cable cover & existing cable of following sizes all as specified and directed :

4 core 16 Sqmm

3.5 core 25 Sqmm

Relaying of serviceable LT cable cover complete all as specified and directed.

M & L in repair for GI pipe light grade 40 mm bore with all fittings complete laid in trenches and taking out existing unserviceable GI pipe complete all as specified and directed.

M &L for Earthing complete with GI earth plate electrode 60cm x 60 cm x 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including GI wire 4mm dia by means of bolts, nuts and check nuts and washers etc made of GI & connected to Earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt-I incl all necessary earth work, all as specified and as directed by Engr-in-charge.

Dismantling of Existing unserviceable steel tubular street light poles, making good disturbed surfaces complete all as specified. Note:- Excavation and PCC work only measured and paid seperately for refixing of pole.

Supply and Erection of Hot dip Galvanized (as per BS EN 1461 standard, with minimum coating thickness of 60 micron) Octagonal Street Light Pole 8 Mtr long should have inbuilt terminal box for cable connection and should be made of Structural Steel (3 mm thick of grade S355 (as per European EN 10025) with single arm bracket of 1.2 to 1.5 Mtr length having following technical details with connection of LED luminaries for suitable size copper multicore cable with connector to fitting and RCC foundation as per manufacturers specification and complete accessories incl complete all cable connection and testing all as specified and directed by Engineer-in- Charge. (i) Bottom Diameter - 135 mm (ii) Top Diameter - 70 mm (iii) Foundation Base plate size 220 x 220x 12 mm (iv) Foundation Bolt - M20 x 700 mm -04 Nos Note:- (i) The RCC required for standard base plate foundation will be paid seperately under relevant item of Sch A. (ii) The Octagonal poles Dia indicates the dimensions of Across Face (A/F) (iii) The Octagonal pole range is Standard Base plate Mounted. (iv) The Octagonal Poles are Tapered Octagonal

Taking out & relaying of LT UG cable of following sizes obtained from ser No 6 including sand filling, laying of cable cover returing & refilling and removal of surplus spoil amd soil complete all as specified and directed.

4 core 16 Sqmm

3.5 core 25 Sqmm

Supply and erection of steel tubular swaged pole 410 SP 31, 9 Mtr long complete with cast iron base plate, finial Taper plug, bolts, nuts, and screws as specified type conforming to IS 2713 complete including 2 coats of aluminium paint over one coat of red oxide zinc chrome primer on external exposed surfaces and 2 coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole complete all as specified and directed. Note:- Earth work & PCC reqd only will be measured and paid seperately under relevant item of Schedule.

S & F Pressure die cast aluminium housing with toughened glass and individual high LEDs with secondary optics LED street light luminaires with IP66, 90 Watt & accessories of LED life 5000hrs including surge protection complete all as specified and directed.

S & F of LED floodlight luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66, Turbo LED series ,180 Watt & accessories complete with fixing arrangement with calmp nut bolt etc all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and exc 1.5 mtr but not exc 3 mtrs depth and getting out in hard/dense soil including taking out faulty cable/cable covers and GI pipe complete all as specified and directed.

M & L for PCC type C2, 1:3:6 using (40 mm graded stone aggregate) in foundations ,filling and mass concrete includings necessary form work complete all as specified & directed

M&L for PCC type B-1, 1:2:4 using (20 mm gradded stone aggregate) as in coping, including form work complete all as specified & directed.

S & F FRP Moulded cable looping box of size 250 mm x150 mmx100 mm complete with electrolytic aluminum bus bar of 100A capacity for 3 phase and neutral fixed on ebonite insulator and one MCB 6-16 A complete all as specified and directed. make : SINTEX / MEW/ Bentek

M&L for street light bracket 1.5 mtr long made out of 40mm dia medium grade GI tube one and duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threding and welding work required for fixing of street light fitting complete all as specified and directed

Supply, stringing, drawing and connecting three core PVC insulated multistranded 1100 volt grade copper conductor cable of size 2.5 sqmm through existing pole/ pipe.

Fabrication for ring type ms bracket made of ms flate bar of size 60X13 MM (5.65 Kg/Mtr) and adjustment to mount four security lights on it with ms clamp and nuts and bolts complete all as specified and directed

D.N.PATIL

Sagar Electricals

somnath engineering corporation

ELECTRO ASSOCIATES

R A Electric Co.