REPAIR TO INTERLOCKING PATH AND PCC IN D3 AREA UNDER ZONE A AT NDA KHADAKWASLA

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for rough dressed sahabad stone slab flooring 30 mm thick, jointed in cement mortar 20mm thick 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

All as per Sl No 4 above but except sahabad stone complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in footpath/hardstanding/pavings/plinth protection/path finished even and smooth without using extra cement including spike rolling to make impression of expanded metal while the concrete is green and forming dummy joints at 2mtr c/c and filled with lean mortar 1:8 complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base of floor, paving, path etc including formwork complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L for 60 mm thick glossy finished machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, laid dry including filling edges in cement mortar 1:4, laid over and including 30 mm thick stone dust cushioning complete all as specified and directed.

M&L for prepolished cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone/Road guard stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including demolition of existing stone complete all as specified and directed.