REPAIR TO INTERNAL WATER SUPPLY,CLEANING OF TANK AND CONNECTED SANITARY FITTINGS (ZONE-II) AREA AT INS CHILKA UNDER GE CHILKA

Amount

M&L for cleaning and removing of all scales and dirt from PVC/RCC tanks and from mouths of inlet and outlet pipes of capacity not exceeding 500 ltrs including taking down carefully the float valve and refixing the same after cleaning the tank including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed.

M&L for cleaning and removing of all scales and dirt from PVC/RCC tanks and from mouths of inlet and outlet pipes of capacity exceeding 500 ltrs and not exceeding 1000 ltrs capacity including taking down carefully the float valve and refixing the same after cleaning the tank including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed.

M&L for cleaning and removing of all scales and dirt from PVC/RCC tanks and from mouths of inlet and outlet pipes of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs capacity including taking down carefully the float valve and refixing the same after cleaning the tank including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed.

M&L for cleaning and removing of all scales and dirt from PVC/RCC tanks and from mouths of inlet and outlet pipes of capacity exceeding 1000 ltrs and not exceeding 5000 ltrs capacity including taking down carefully the float valve and refixing the same after cleaning the tank including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls etc all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repairs unplasticised PVC pipes 50mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complet all as specified and directed.

S&F in repairs PVC (SWR) bends 75mm bore any radius etc complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110mm bore any radius etc complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and directed.

Taking down and Refixing old 40 or 50 mm dia bore of steel tubing and connections including cleaning for refixing in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking down and Refixing old 25 or 32 mm dia bore of steel tubing and connections including cleaning for refixing in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking down and Refixing old 20 mm dia bore of steel tubing and connections including cleaning for refixing in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking down and Refixing old 15 mm dia bore of steel tubing and connections including cleaning for refixing in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repairs 50mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 40mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 25mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 20mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 15mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F repairs 32mm of outer dia CPVC Pipes including brass fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F repairs 25mm of outer dia CPVC Pipes including brass fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F repairs 20mm of outer dia CPVC Pipes including brass fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F in repair 40mm dia bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repair 25mm dia bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repair 20mm dia bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repair 32mm dia bore of pipe CPVC ball valve for CPVC pipe and fixed all as specified and as directed.

S&F in repair 25mm dia bore of pipe CPVC ball valve for CPVC pipe and fixed all as specified and as directed.

S&F in repair 20mm dia bore of pipe CPVC ball valve for CPVC pipe and fixed all as specified and as directed.

S&F in repairs wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete all as specified and as directed.

S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white with grating,union and waste coupling including fixing plugs, securing urinals to plugs including 60mm long screws, pointing around urinal back in white cement complete all as specified and as directed.

S & F in repair vitreous china squatting pan of Orissa pattern long pan size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding all as specified and as directed

S&F in repair water closet pedestal vitreous china white pattern (EWC) white including fixing bolts (excluding flushing cistern and flush pipe) including necessary connetion to trap and flushing pipe complete all as specified and directed.

S&F in repair water closet Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts (excluding flushing cistern and flush pipe) including necessary connetion to trap and flushing pipe complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair chromium plated 15mm dia bore of pipe stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed concealed type complete all as specified and directed.

S&F in repairs shower rose Brass chromium plated of size 125 mm with swivel joint fixing to GI pipe of 15mm dia incuding GI Elbow and nipple complete all as specified and as directed.

S&F in repairs chromium plated 15 mm dia bore of pipe bib taps , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15 mm dia bore of pipe Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) ISI marked complete all as specified and as directed.

S&F in repairs 15 mm dia bore of pipe two way bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) ISI marked complete all as specified and as directed.

S&F in repairs 32 mm dia flexible PVC waste pipe suitable for WHB,sink and urinal with cup washers complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engr-in -charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm screed bed in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F in repair 15mm bore dia of pipe pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed all as specified and as directed.

S&F in repair 15mm bore dia of pipe pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) ISI marked, screwed down high pressure, with long screwed shanks and fly-nuts,screwed for iron pipe and fixed all as specified and as directed.

S&F in repair (EWC) plastic water closet seat, white colour, closed pattern with flat bottom, and cover and PVC/mild steel chromium plated or CP hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repair plastic water closet seat, white colour, closed pattern with flat bottom, and Anglo Indian seat cover (Semi pedastal and PVC/mild steel chromium plated or CP hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repair brass CP tubular towal rail 20mm dia , D type, 600mm long between flanges complete all specified and as directed.

S&F in repair CP 15 mm dia bore of pipe stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all specified and as directed.

S&F in repair 15 mm dia bore of pipe angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all specified and as directed.

M&L in repairs for 32 mm Waste fittings, Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/ used for WHB/sink complete all specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and as directed.

S&F in repair 40 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 40mm - 690 gms) complete all as specified and as directed.

S&F in repair 25 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.

S&F in repair 20 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed.

S&F 500 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed.

S&F 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed.

S&F 2000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed.

S&F 5000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and dismantling water tank and removing to store complete all as specified and as directed.

S&F in repair PVC water tank cover for 500 to 2000 ltr capacity existing water tanks incl all necessary fittings as specified and as directed.

S&F in repair PVC water tank cover for 5000 ltr capacity existing water tanks incl all necessary fittings as specified and as directed.

S&F in repair 15mm dia bore of pipe Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repairs PVC soap tray fixing with screw in the wall as specified and as directed. Make : Prayag Cat No 195) or equivalent.

S&F in repair 32mm dia bore of pipe chromium plated stop valves/flush stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 25mm dia bore of pipe chromium plated stop valves/flush stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Swivel shower , 195mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs wash hand basin pillar tap sensor assembly complete fitting including battrery setall as specified and as directed. Make :Parryware or equivalent.

S&F in repairs urinal sensor assembly complete fitting including battrery set all as specified and as directed. Make :Parryware or equivalent.

Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and as directed.

Petty repairs to attending no water supply complaint and rectification of minor repairs ie cleaning of air lock pipe, blockage of pipe line, blockage of pillar taps /bib taps/stop valve and cutting and opening broken pipe and refixing the same after new threading etc complete all as specified and directed.

S&F in repairs 15mm dia of bore of pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) ISI marked complete all as specified and directed.

M&L for repair adjusting, tightening the hinging device of EWC/Anglo Indian WC seat cover complete including replacement of broken hing in device complete all as specified and as directed.

S&F in repair chromium plated cap of any type suitable for bib tap, stop cock, pillar taps, angle valve fixed with screw to spandle etc complete all as specified and as directed.

S&F in repair brass spindle of any type suitable for bib tap, stop cock, pillar taps, angle valve fixed with screw to spandle etc complete all as specified and as directed.

M&L for cutting chases for removing concealed type GI pipe and stop cock and refilling the same after replacement of GI pipe/stop cock and matching the same with existing tile/wall surface complete all as specified and as directed. Note : GI pipe, stop cock , tiling shall be measured and paid separately under the respective item.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at rounding the air pipe and straining and fixing to any type of GI pipe with galvanised mild steel wire or straining bolts complete all as specified and as directed.

HARI HARA NAYAK

UDAYA BHANU NAYAK

M/S KAMAL KEE ENGINEERS WORK