Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹17.3 L+₹1.4 L (8.84%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹18.3 L+₹2.4 L (14.9%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹18.4 L+₹2.5 L (15.6%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder | |
| 5 | L5₹18.9 L+₹3.0 L (18.9%)Rejected-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L5 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
WELCOME MAINT AND OTHER CERTAIN WORKS TO OFFRS MD ACCN IN ZONE-1(A) AREA UNDER AGE B/R-IV AT JAIPUR MIL STN UNDER GE (S) JAIPUR
2023_MES_634019_1
GE(S)/J-52P/2023-24 8854/E8
Open Tender
Civil Works
Item Rate
270 days
Jaipur
E class and category a (i)
9 documents required · 9 mandatory
₹500
Yes
GE (S) Jaipur
₹40,000
Yes
23 Mar 2024
22 Dec 2023
24 Jan 2024
22 Dec 2023
17 Jan 2024
5 Jan 2024
Amount
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and fair without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and fair without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar (1:3) on any face of ceilling or concrete surfaces, surfaces finished even and fair without using extra cement complete all as specified and as directed.
M&L for preparation of newly palstered surface of wall and applying 2mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of newly palstered surface of ceiling and applying 2mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and as directed.
Demolition of brickwork or stone masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.
M&L for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed.
M&L for complete removal of existing treatment and applying 1 mm thick wall care putty on wall putty to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and as directed.
M&L for complete removal of existing treatment and applying 1mm thick wall care putty on ceiling to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of old decorated plastered/unplastered surfaces of wall by brooming down, scraping including cornices pillars etc and applying one coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of old decorated plastered/unplastered surface of ceiling by brooming down, scraping including cornice pillers etc and applying one coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of old decorated plastered/unplastered surfaces of wall by brooming down, scraping including cornice pillers etc and applying one coats cement base paint complete all as specified and as directed.
M&L for complete removal of existing surafces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats cement base paint complete all as specified and as directed.
M&L preparation of old plastered/un-plastered surfaces of wall by brooming down including cornices,piller etc and aplying one coat of white wash on walls complete all as specified and as directed.
M&L preparation of old plastered/un-plastered surfaces of ceiling by brooming down including cornices, piller etc and aplying one coat of white wash on ceiling complete all as specified and as directed.
M & L for applying 1mm thick wall care putty on wall and ceiling incl preparation of surfaces with rubbing down putty to make it even and smooth to match surface of existing wall and ceiling complete all as specified and as directed.
M&L preparing old surfaces of wood or wood based material of any description exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old steel surfaces over 10cm width or girth of any description exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L preparation of old plastered/un-plastered surfaces of wall by brooming down including cornices,piller etc and aplying one coat of white wash on walls complete all as specified and as directed.
M&L preparation of old painted concrete surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick wall n. exc one brick wall. for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.
S & F in repairs stop valve fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions complete all as specified and as directed.
S & F in repairs 15 mm bore Bib tap cast copper alloy chromium plated fancy type and screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repairs CP 15 mm bore pillar taps, fancy type screwed down high pressure, with or with out lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and as directed.
S&F in repairs 15 mm bore brass CP Wall Mixer for mixing hot & cold water secewed down for iron pipe complete all as specified and as directed.
M&L for newly plastered surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat of primer complete all as specified and as directed.
M&L for complete removal of existing surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat of primer complete all as specified and as directed.
Supply and fixed in repairs fancy type CP angle cock 15mm bore cast coper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Make-Jaquar Cat. No. FUS-CHR-29053 or Kohler Cat No K-117911 or any other equivalent make complete all as specified and as directed.
Supply and fixed in repairs 15 mm dia bore CP Central Hole Basin Mixer with Regular Spout without Popup Waste System with 450mm Long Braided Hoses, 20mm Cartridge Size etc as provided with manufacturer complete all as speciifed and as directed. Make-Jaquar Cat. No. CFLR-CHR-5167NB or equivalent
Supply and fixed in repairs 15 mm dia bore Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges etc as per manufacturer complete all as specified and as directed. Make-Jaquar Cat FUS-CHR-29273UPR or equivalent
Supply and fixed in repairs CP brass kitchen sink mixer with pipe swinging spout wall mounted model with connecting legs & wall flanges including all accessories as per manufacturer complete all as specified and as directed.Make-Jaquar Cat/ FUS-29165, Kohler Cat No. K-373151N-4-CP / Grohe Cat No. 31401DCO or equivalent
Supply and fixed in repair fancy type long body CP bib cock 15mm dia with crutch or butterfly handle as approved complete all as specified and directed. Make- JaquarORP-CHR-10037PM /Kohler Cat No. K-11749IN-9-CP / Roca Cat Part No. RT5A7820CA1 or equivalent
Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and as directed. Make-Jaquar CON-047KN,/ Kohler Cat No. K-37320IN-4-CP / Roca Cat Part No. RT5A9320CA1 or equivalent
S&F in repairs CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709/ Kohler Cat No. K-724191N-CP / Roca Cat No. RT18700A1 or equivalent
S&F in repair Toilet paper holder complete all as specified and as directed. Make : Jaquar Code ACN-1153S/, Kohler Cat No. K-56331N-CP / Roca Cat No. RA816384001 or equivalent
S&F in repair CP single towel rail 600 mm complete all as specified and directed. Make : Jaquar-AKP-35711PS/, Kohler Cat No.K-250651N-CP /Roca Cat No. RA816070165 or equivalent
S&F in repair Soap dish complete all as specified and as directed. Make :Jaquar Code AQN-7731,/ Kohler Cat No. K-56341N-CP / Roca Cat No. RA816070132 or equivalent
S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. Make : Jaquar CAT Part No. ALD-577 / Kohler Cat No. K-129271N-CP / Roca Cat No. RF9060A1 or equivalent
S & F in repair Corner glass shelf (with bracket). Make : Jaquar, CAT Part No ACN-1173 or equivalent
S & F in repair CP towel ring round complete all as specified.. Make : Jaquar, CAT Part No AQN-7721/ Kohler Cat No. K-5631IN-CP /Roca Cat No. RA816070172 or equivalent
S&F in repairs white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified and as directed. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF/ Roca Cat Part No. RS34273700H /Kholer Cat part No. K-77739T-SL-0 or equivalent
S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified. Make : Jaquar Cat No. CNS-WHT-905/ Kohler Cat No. K-4126K-00 /Roca Cat part No. RS327875001 or equivalent
S&F in repairs 15 mm bore Pillar cock with crutch handle alongwith its accessories complete all as specified as per manufacturer make. Make Jaquar FON-CHR-40011 or equivalent
S&F in repairs CP grating 100mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement or white cement complete.
S&F in repair Butterfly Stainless Steel Toilet Jet or Hands-Free Spray including 1 metre Heavy PVC Hose complete all as specified and as directed.
S&F in repair 32mm dia PVC waste pipe flexible type for WHB/Sink 100cm long with union complete all as specified and as directed.
S&F in repair 20mm dia stainless steel powder coated curtain rod complete all as specified and as directed.
S&F in repair stainless steel bracket holder for curtain rods 20mm dia fixed with screws and rawl plugs complete all as specified and as directed.
S&F in repair SS steel decorative knob or side bulb holder for 20mm dia curatin rod complete all as specified and as directed.
M & L for taking down steel shutter of any description, area n exc 1 Sqm each for repairing the steel windows in any position (building upto three storey) by replacing the projecting type hinges (Single pane) including welding the new hinge and refixing the shutter including applying two coats of synthetic enamel paint r and making the disturbed surfaces good complete all as specified and as directed .
S&F in repair steel window handles and peg stay etc including welding if required complete all as specified and as directed.
S&F in repair 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet complete all as specified and as directed.
S&F in repair SS soft close auto hinge bright finish (Auto close concealed hinges) suitable for 18mm thick shutter complete all as specified and as directed.
S&F in repair 125 mm dia oval shape SS handle fancy type bright finish complete all as specified and as directed.
S&F in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified and all as specified. Make : Godrej SS 304 or equivalent.
S&F in repair stainless steel plate basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej SS 304 or equivalent.
S&F in repair stainless steel cup & saucer basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej SS 304 or equivalent.
S&F in repair stainless steel cutlery & spoon basket (plain) of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej SS 304 or equivalent.
S&F in basket/trolly soft close telescopic channel 50 cm long and 50mm width extruded MS galvanised over roller including drilling over stone etc complete all as specified and as directed.
Taking down existing aluminium door single leaf exc 1.5 but n.exc 4.0 Sqm including taking down all members, with sheet glass of any thickness, cleat, neosprene rubber beading and resecuring all section & tightening all joints including fixing new small cleats of suitable size, fixing L type cleats of SS to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but with new neosprene rubber beading (paid under spearate item) and making the door shutter serviceable, including fixing on hinges complete all as specified and as directed.
Taking down existing aluminium window single leaf n exc 1.5 Sqm including taking down all members, with glass of any thickness, cleat, neosprene rubber beading and resecuring all section & tightening all joints including fixing new small cleats of suitable size, fixing L type cleats of SS to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but with new neosprene rubber beading (paid under spearate item) and making the door shutter serviceable, including fixing on hinges complete all as specified and as directed.
S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality
Supply and Fix neosprene rubber beading to existing Aluminium door and window taken down for repairing complete all as specified and as directed.
S & F steel water tubes, 15mm bore medium grade galvanized iron, with all fitting and fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete all as specified and as directed.
S & F steel water tubes, 20mm bore medium grade galvanized iron, with all fitting and fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections, including refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)
Taking up or down 20mm bore steel tubing and connections, including refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)
S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S & F in repairs PVC valve less symphonic action type flushing cistern low level with all internal fittings including flush pipe with bend , 450mm long PVC connection and connected to WC complete all as specified and directed.
S&F in repair brass chromium plated Tubular towel rail 20mm dia including brackets complte all as specified and as directed.
S&F in repairs Stainless steel sink, 1.00mm thick for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union,coupling etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complte all as specified and as directed.
S & F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste coupling and pipe including bedding in cement mortar on to dwarf walls or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm complete all as specified and as directed.
M&L in repair for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
M & L PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75mm.
S&F Rotational moulded polye?thylene 500 ltrs water storage tanks (cylindrical vertical with closed top) 3 layered hoisted and fixed in position with 20 mm ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old unserviceable water tanks and removing to store complete all as specified and as directed.
S&F UPVC (SWR) pipes single/double socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore..including taking down of existing pipe .
S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75 mm bore..including taking down of existing pipe .
S&F in repair UPVC (SWR) bend of 110mm bore provided with access door complete all as specified and as directed.
S&F in repair UPVC (SWR) bend of 75mm bore provided with access door complete all as specified and as directed.
S&F UPVC ( SWR ) single junction (single ' T ' ) equal or unequal provided with access door of 110mm bore.
M&L for PVC connection 450 mm long heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repairs complete all as specified and as directed.
S&F in repair white vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (Excluding flushing cistern and flush pipe) including connection to drain pipe and flushing pipe all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level) complete all as specified and as directed.
M&L for Cement concrete type D2 (1:4:8) 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.
S&F in repair wash hand basin, flat back 550x400mm vitreous china (white) including PTMT wastecoupling of 32mm bore size, waste pipe PVC of 32mm bore, PVC connector 450mm longs with angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and as directed.
S&F in repair Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises
M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.
M&L Non skid ceramic joint free coloured tiles 7-8 mm th (square or rectangular)area of each tile exc 0.06 SM but not exc 0.11 SM in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L Non skid ceramic joint free coloured tiles 7-8 mm th (square or rectangular)area of each tile exc 0.11 SM but not exc 0.18 SM in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for vitrified ceramic coloured tiles (of approved coloured shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick CM 1:6 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified and as directed.
All as per item No. 94 but on vertical surfaces such as skirting, dados and riser etc including a layer of screed bed/backing coat 10mm thick in CM 1:4 all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness laid dry or laid dry and pointed in floor, aprons or as in slabs complete all as specified and as directed.
M&L for Granite 25 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite icomplete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Taking down existing chowkats or frames (without taking off out shutters ,from the frames), n exc 1.5 Sqm complete all as specified and as directed.
Taking down door chowkhat or frame exe 1.5 sqm but n exc 4 sqm (without taking off shutter from the frames) complete all as specified and as directed.
Taking down shutters of any description exc 1.00 sqm area and not exc 2.00 Sqm each and removing to store complete all as specified and as directed.
S&F 32mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
S& F Factory made 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S& F Factory made, 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, but divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars,(door consist 4 to 6 panels) prepared to receive glass/ gauge etc(without sash bar) edges of framing plain , chamfered or rounded fitted with cut and mitered beads for securing glass etc size member of shutters as specified in SSR Pt I ,section 8, clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified and as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. Note :- Item included with MS flat of Size 25 X 3mm, 200 MM long will be provided as holdfast in the chowkat including cutting and pinning in for holdfast in brick or concrete surfaces) complete all as specified and as directed.
M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC colour sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and as directed.
All as per item No 107 above but without glazing bar
S&F powder coated (minimum thickness 50micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
M&L powder coated (minimum thickness 50micron) aluminium window and ventilator shutters, fixed/side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed. Note: Rate shall be inclusive of 4.8mm thick plain or tinted glass sheet for glazing etc.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; making bracket with angles railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
M&L for preparation of new wooden surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.
S& F in repair 300 mm aluminium alloy ,anodized sliding door bolt with hasp and staple and fixing clips of sheet , cast or extruded section , and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt complete all as specified and as directed.
S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and as directed.
S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section, complete all as specified and as directed.
S&F aluminium ,anodized 150mm long barrel tower bolts of extruded section, complete all as specified and as directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 with SS screw of good quality complete all as specified and as directed.
S & F 100 mm size butt hinges of medium weight cold rolled mild steel complete all as specified and as directed.
S&F 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate inclunding fixing to existing steel with welding or wooden frame complete all as specified and as directed.
M&L for Running welding in repairs for the metal to be welded in thickness exc 20mm but n exc 25mm complete all as specified and as directed.
S&F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F in repair Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples over steel window including welding for cutting down screws or renewal of screws and wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 3mm thick, frosted sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 4.80 mm thick, plain or tinted sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
M&L in repair for II nd class HW wrought Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of area not exc 3 Sq cm complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc including dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roofcoveringscomplete all as directed and as directed.
M&L for Expanded metal, N exc 4 kg per Sqm cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.
S & F in repair Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm complete all as specified and as directed.
S&F Aluminium die cast door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters upto 1000 mm in width complete all as specified and as directed.
M&L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth over brick or concrete wall complete all as specified and as directed
S.R.Enterprises
ANKIT BUILDERS
J.J.ENGINEERING
Chaudhary Constructions
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .