General overhauling of Hot water Generators, Servicing of AHUs alongwith allied Preventive and Breakdown Maintainence Works to Central Heating System at Govt Superspeciality Hospital Srinagar.

Amount

Opening of Rapid Therm -03 lac kcal/hr Hot Water Generator. Dismounting of the burner gun assembly, removing the front plate coil from it by employing chain pulley block. The job involves thoroughly removing soot and carbon deposits from shell and coil by using wire brush, scrapers and blower etc. The inside of the coil shall be cleaned by circulating through it a solution of de-scaling compound, sulphamic acid powder of Thermax Make (approx . 20 Kg) and water continuously for 24 hr with the help of pump while maintaining a PH of 1-2. The solution is to be circulated from tank/barrel/trays. All consumable items viz. Brushes, detergent, diesel/kerosene oil, dhoti cloth etc. required shall be provided by the executing agency. The HWG shall then be reassembled, tested and commissioned after overhauling. The job includes replacement of all seals, gaskets, asbestos rope, asbestos felt, asbestos sheet, defective nuts, bolts etc. as required .The tools and tackles required for the job and any other consumables shall be provided by the contractor.

Replacement of Refractory of Rapid Therm -03 lac kcal/hr Hot water Generator. The job includes complete removal of old/damaged refractory and thorough cleaning of refractory surfaces/bases. Angle Iron hooks/holdfasts shall be firmly welded to the refractory base wherever necessary and collar of the top plate shall be repaired if required. Refractory shall be laid in "fire Crete Super' brand castible cement.

Front Plate Refractory

Back plate refractory

Complete servicing of various capacities of AHUs (9000 CFM, 14000 CFM) viz-a-viz metallic filters, air dampers, shields, motors, belts, blowers and finned hot water coils etc. All the parts are to be cleaned and washed using detergent, high presure water jets and kerosene oil/diesel . The coils are to be descaled by circulating sulphamic acid powder with appropriate quantity of water for 4 -5 hrs till working PH is achieved (PH of 1-2). All necessary items viz.pumping units, buckets, piping and litmus paper (PH 1-7), gaskets, nuts and bolts, dhoti cloth shall be arranged by the executing agency. Further, the job includes greasing of bearing pins and the moving parts and testing of AHUs for noiseless operation and satisfactory performance . The job also consists of checking out leaks to the hot water coils and repairing of the same. The job also includes alignment of the shaft and dampening of the vibrations. All tools and tackles,consumable items which shall be required during execution of work shall have to be provided by contractor.

Servicing of Beacon Make 15 HP circulation water pump/s by way of removing/dismantling of the pump assembly followed by checking of impeller, diffuser rings, bushes bearing, and mechanical water seal for complete water leakage seal. All faulty components viz. impeller, diffuser rings, bushes bearing, and mechanical water seal should be replaced by the firm. The pump/s should be reassembled and sealed back with packings for mounting into the central heating circuitry followed by testing and commissioning.

Repairs/replacement of damaged inlet/oulet connections of FCU's/Radiators in various sections of the hot water system including dismantling of the damaged inlet/outlet pipe connections of the radiators and then providing/fitting of new 304 Grade Stainless Steel cladded EDPM pipe with washer and nuts other necessary fittings including Ball valves, elbows, Tees, Unions, Adapters, etc. to make the FCU's/Radiators fully functional. The job also includes testing of the system for its satisfactory performance.

Servicing of 5 HP feed water pump/s by way of removing/dismantling of the pump assembly followed by checking of impeller, diffuser rings, bushes bearing, and mechanical water seal for complete water leakage seal. All faulty components viz. impeller, diffuser rings, bushes bearing, and mechanical water seal should be replaced by the firm. faulty components should be replaced by the firm. The pump/s should be reassembled and sealed back with packings for mounting into the central heating circuitry followed by testing and commissioning.

Opening of Rapid Therm -03 lac kcal/hr Hot Water Generator. Dismounting of the burner gun assembly, removing the front plate coil from it by employing chain pulley block. Retreival of damaged circulation coil by way of removal of fastners and retraction by chain pulley. The job further includes welding of leages by way of patching MS/CI plates of requisite length and checking for leakages by way of forced water circulation using pressure pump. Post leakage proofing, the coil should be refitted and fastened into boiler shell.The job includes repair/ replacement of damaged refractory seals, gaskets, asbestos rope, asbestos felt, asbestos sheet, defective nuts, bolts etc. as required caused during retrival .The tools and tackles required for the job and any other consumables shall be provided by the contractor.

Servicing of FCU's of various capacities/sizes installed at Govt. SSH Hospital Srinagar, by using skilled labours and technicians. The Job includes dismantling of indoor unit filters and cleaning it thereof and removing of dust and dirt from the outdoor unit by way of spraying suitable chemical agent.The Job further includes checking all parameters of working and setting them right as per requirement The Job further includes assembling and reinstalling back all the items removed from the unit. The Job also includes testing the performance of the FCU unit on load.All the tools and tackles required at site shall be arranged by the firm.

Providing and fitting of A41 V-Drive Belts of standard make in place of slacked/loose tension belts in drive units of various AHUs.The job also includes testing of the system for its satisfactory performance.

Providing and fitting of A36 V-Drive Belts of standard make in place of slacked/loose tension belts in drive units of various AHUs.The job also includes testing of the system for its satisfactory performance.

Providing and fitting of A38 V-Drive Belts of standard make in place of slacked/loose tension belts in drive units of various AHUs.The job also includes testing of the system for its satisfactory performance.

Replacement of damaged hot water generator cladding and sandwiched glasswool/rockwool by way of removing old damaged clad and glass wool with 03 mm alumnium clad sheet (08 sqm approx.) and glasswool of 50 mm thickness with density not less than 30 kg/m3. The sheet is to be riveted/screwed into the shell frame with proper shape moulding . The sheet is to be painted with two coats of heat resistant paint of suitable shade.All tools and tackles,consumable items which shall be required during execution of work shall have to be provided by contractor.

Replacement of complete oil burner assembly (MAIOR P 60 AB HS TLD or as recommended by OEM) having working voltage of 220/415 V, Temperature of 20°C with compatible motor power of 1.8 kW. The job also includes testing of the burner assembly for successful operation of the Hot water Generator. All tools and tackles, consumable items which shall be required during execution of work shall have to be provided by contractor.(HWG 1 and HWG 2)

FARUKH SONS ENTERPRISE

BHAT SALES CORPORATION

Elevate Engineers