Construction 11 KV Line Under Full Deposit

Amount

Safe Carriage of following material from Electricity store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

9/11 Mtr. S.T. Poles

11 KV X-Arms, weasal conductor, G.I wire,Disc Insulators, Pin insulators, clamps Abc Bunch and other required line material, if any.

25 KVA T/F

100 KVA T/F

Errection of following Poles including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

STP (SP-33) 9.0/11 Mtr.

Double pole

Fixing of Following Metarial

3 Phase LT Distrubution Box With Holding Clamp

DLMS Meter

11 KV Danger Board & Number Plate for STP Pole

11 KV Fuse Set

11 KV TPMO

Top Channel/Dropper Channel

Errection and grouting of stays as per RESPO manual and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO manual and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR Weasal conductor

Areal Bunch Conductor

LT PVC Cable

Cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer

Installation of following T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.

25 KVA T/F

100 KVA T/F

Installation of extra ''T'' on the errected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The "T" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.

Round Pole Plinth

Grouting of ST Pole (wherever required) with cement, sand and brick ballast/stone ballast in ration 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. As per actual site requirement.

SUMIT ENGINEERING

GOSWAMI ENTERPRISES