Interior modification for converting the Third floor exam hall into Artificial Intelligence Special Purpose Hubs (AI-SPH) Training Facility at JAC, JIPMER, Puducherry

VOLUME V - BILL OF QUANITITY/ PRICE BID

Notice Inviting Tender Number: HITES/FM/JIP/Proj/26-27/1 Dated: 26.06.2026

Name of Work : Interior modification for converting Third floor exam hall in to Artificial Intelligence Special Purpose Hubs (AI-SPH) Training Facility at JAC, JIPMER, Puducherry

Name of the Vendor :

SL NO. DETAILS OF WORK UNITS QUANTITY Rate (Rs.) in figures Rate (Rs.) in words AMOUNT

1 Removel of existing aluminium windows, clearing the site and stacking at a place specified by the client Sqm 40 No Rupees Only

2 Carting away the debries out of campus by truk loads The scope includes the removal of debris, disposal at approved location, loading and unloading, and making the surface clean. Loads 10

3 Floor/ wall chasing of with upto 400mm for condute laying and finishing with machine batched and machine mixed design mix cement concrete, using cement content as per approved design mix, as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work above plinth level upto floor V level Rmt 250 No Rupees Only

4 Careful dismantling, handling, and reinstallation of existing double-leaf door assembly including door shutters and frame, reoriented to achieve outward opening configuration. Scope includes removal without damage, necessary modifications to frame alignment, reversal/relocation of hinges, adjustment or replacement of hardware, and re-fixing to structural opening using appropriate fasteners. Work shall include making good of jambs, realignment, leveling, and ensuring smooth operation with proper clearances. Rate inclusive of all labour, minor materials, touch-up finishing, and complete reinstatement to functional condition as per site requirements. Nos 1 No Rupees Only

5 Removing the old light fixtures / ceiling fans and kept in safe custody inside the campus wherever JIPMER instructed (with in JIPMER campus) Each 80 No Rupees Only

6 Supply, installation, and final finishing of 2.5 mm nominal thickness homogeneous PVC/vinyl flooring system, factory-manufactured, laid over prepared and levelled existing substrate using manufacturer-recommended synthetic adhesive conforming to relevant IS standards. The work shall include surface preparation, cleaning, application of primer (where required), and full-spread adhesive bonding ensuring void-free adhesion. All longitudinal and transverse joints shall be thermally fusion-welded using compatible welding rods to achieve seamless continuity, watertight integrity, and monolithic appearance. The flooring shall be of Wonderfloor or approved equivalent, in selected shade and pattern as per consultant approval. Scope includes provision and installation of matching vinyl skirting, coved or straight profile as applicable, including necessary edge finishing, trimming, and termination accessories. Rate shall be inclusive of all materials, labour, tools, wastage, cutting, and compliance with manufacturer specifications and site conditions. Sqm 200 No Rupees Only

7 Design, supply, and installation of 10 mm thick nylon carpet flooring over prepared substrate, comprising thorough surface cleaning and preparation in accordance with manufacturer’s specifications to ensure proper adhesion. Carpet to be laid using approved adhesive, evenly spread to achieve full-surface bonding and uniform finish.Scope to include accurate cutting, trimming, jointing, edge finishing, and removal of debris from site. Post-installation, a protective layer of 50-micron PVC/HDPE sheet to be provided and secured with tape to safeguard the surface during subsequent works. On completion, protective covering to be removed and carpet to be vacuum-cleaned; any stains arising due to inadequate protection to be rectified by shampooing and restoring to original condition. Rate inclusive of all materials, adhesives, protection, labour, wastage, and complete execution as per approved specifications and site conditions. Sqm 200 No Rupees Only

8 Design, fabrication, supply, and installation of multi-chambered uPVC with sliding doors installed in AI & VR labs and passage areas. Units to be factory-finished with double-glazed IGUs (e.g., 5-12-5 mm) using hermetically sealed air gap for thermal/acoustic performance. Sliding shutters on roller-track system and openable shutters with hinges, complete with EPDM gaskets, brush seals, multi-point locking, and approved hardware. Includes fixing with anchor fasteners, gap filling with PU foam, perimeter sealing with weather-grade silicone, and all necessary accessories such as glazing beads, interlocks, drainage slots, trims, and finishing. Rate inclusive of all materials, labour, wastage, and execution as per approved specifications Sqm 60 No Rupees Only

9 Design, fabrication, supply, and installation of multi-chambered uPVC with openable door and fixed panel installed in passage Entrances. Units to be factory-finished with double-glazed IGUs (e.g., 5-12-5 mm) using hermetically sealed air gap for thermal/acoustic performance. Sliding shutters on roller-track system and openable shutters with hinges, complete with EPDM gaskets, brush seals, multi-point locking, and approved hardware. Includes fixing with anchor fasteners, gap filling with PU foam, perimeter sealing with weather-grade silicone, and all necessary accessories such as glazing beads, interlocks, drainage slots, trims, and finishing. Rate inclusive of all materials, labour, wastage, and execution as per approved specifications Sqm 30 No Rupees Only

PARTITION/WALL PANELLING

10 Supply and installation of non-load bearing gypsum board partition system of overall thickness ~100 mm, comprising framework of 25 x 50 mm aluminium sections fixed to floor, ceiling, and adjoining walls using suitable fasteners, forming a rigid grid structure. Partition to be clad on both faces with 12.5 mm thick gypsum boards, mechanically fastened to the framework with drywall screws at specified spacing, with cavity infill of glass wool insulation for enhanced acoustic and thermal performance. All board joints to be treated with jointing compound and reinforced with fibre tape to achieve seamless surface finish. Includes provision for cut-outs, edge trims, corner beads, and necessary backing supports. Surface to be finished smooth, ready to receive putty and paint. Rate inclusive of all materials, accessories, labour, scaffolding, cutting, wastage, and complete installation as per approved specifications and site conditions. Sqm 220 No Rupees Only

11 Design, supply, fabrication, and installation of wall panelling system of overall thickness ~65 mm for VR station, comprising non-load bearing framework of GI sections fixed to wall using suitable anchor fasteners, forming a stable sub-grid. Paneling to be finished with gypsum boards of required thickness, mechanically fastened to the framework, with cavity infill of glass wool/rock wool insulation to achieve improved acoustic absorption and thermal performance. All joints to be treated with jointing compound and reinforced with fibre tape for seamless finish. Includes necessary edge trims, corner beads, backing supports, and provisions for cut-outs/services. Surface to be finished smooth, ready for putty and paint. Rate inclusive of all materials, insulation, accessories, labour, cutting, wastage, and complete installation as per approved specifications and site conditions. Sqm 90 No Rupees Only

12 Design, supply, and installation of wall panelling system using 9 mm thick PET acoustic panels in VR station areas, fixed over prepared substrate using a combination of high-strength double-sided adhesive tape and neutral-cure silicone sealant as per manufacturer’s installation protocol to ensure uniform bonding and alignment. Panels to be factory-finished with precise edge profiling, installed in required pattern with tight joints and consistent spacing to achieve seamless visual appearance and acoustic performance. Includes surface preparation, marking layout grid, edge alignment, and necessary trimming/cutting for services or terminations. Scope includes provision of edge finishing, corner treatment, and all consumables required for fixing. Rate inclusive of all materials, adhesives, labour, cutting, wastage, and complete installation as per approved specifications and site conditions. Sqm 100 No Rupees Only

13 Providing and fixing of Bison board of 12mm of approved make for closing window opens including wooden beeding Sqm 40 No Rupees Only

14 Supply, and installation of single-leaf frameless glass door (1000W x 2100H mm) comprising 10 mm thick clear toughened glass, heat-treated and processed to relevant standards, with all edges machine polished and arrised. Door to be installed within anodized aluminium mother frame and peripheral framing system, fixed to structural opening using suitable anchor fasteners ensuring rigidity and dimensional stability. Shutter to be fitted with approved hardware set including floor spring/patch fittings, pivot/hinge system, handle, lock, and accessories of make such as Ozone / GEZE or equivalent. Includes application of frosted film to specified design/pattern, properly aligned and bubble-free. Scope includes all gaskets, sealants, fixing brackets, and finishing accessories to ensure smooth operation, proper alignment, and secure installation. Rate inclusive of all materials, hardware, labour, cutting, wastage, and complete execution as per approved specifications and site conditions. Nos 1 No Rupees Only

15 Supply, and installation of single-leaf flush door (900W x 2100H mm) comprising solid core/engineered flush door shutter, both faces finished with 1.0 mm thick high-pressure laminate bonded under pressure, with all exposed edges sealed using matching PVC edge banding or hardwood lipping. Door to be provided with factory-cut glazed vision panel incorporating clear/toughened glass of required thickness, fixed with suitable beading and sealant. Shutter to be mounted on hardwood/engineered door frame with necessary anchoring and alignment. Includes complete hardware set such as hinges, mortise lock, handle, stopper, tower bolt, and accessories of approved make, along with necessary sealants and finishing. Rate inclusive of all materials, glazing, hardware, labour, cutting, wastage, and installation in proper line, level, and alignment as per approved specifications and site conditions. Nos 4 No Rupees Only

16 Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.with door frame 2nd class teak wood.Door to be provided with factory-cut glazed vision panel incorporating clear/toughened glass of required thickness, fixed with suitable beading and sealant.Includes complete hardware set such as hinges, mortise lock, handle, stopper, tower bolt, and accessories of approved make, along with necessary sealants and finishing. Rate inclusive of all materials, glazing, hardware, labour, cutting, wastage, and installation in proper line, level, and alignment as per approved specifications and site conditions. size not less than 1.5m X 2.1m (H) Nos 2 No Rupees Only

17 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

0.0 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 200 No Rupees Only

18 Design, engineering, supply, and installation of acoustic false ceiling system using 15 mm thick tegular edge Ecophone panels of size 600 x 600 mm, manufactured by Saint-Gobain Ecophon or approved equivalent, installed over concealed/exposed G.I. powder-coated 15mm grid suspension system. Grid system to comprise factory-finished main runners (main tees), cross tees, and perimeter wall angles forming a modular framework, suspended from structural soffit using G.I. hangers/supports fixed at maximum 1200 mm c/c with suitable anchor fasteners and adjustable suspension arrangements. Ceiling panels to be laid in true level within the grid with tight joints and proper alignment, ensuring high acoustic performance (sound absorption) and aesthetic uniformity. System to include necessary cut-outs, edge trims, and supports for integration with lighting, HVAC, and fire-fighting services without compromising panel integrity. Installation to ensure dimensional stability, load distribution, and compliance with manufacturer specifications. Rate inclusive of all materials, suspension components, accessories, labour, scaffolding, cutting, wastage, and complete execution as per approved drawings and site conditions. Sqm 90 No Rupees Only

19 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

0.0 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) Sqm 80 No Rupees Only

20 Design, supply, and installation of designer false ceiling system at Reception area, comprising a composite assembly of gypsum board, mineral fibre tiles, and MDF elements configured as per approved architectural design. System to be executed over a concealed suspension framework of G.I. sections, suspended from structural slab using anchor fasteners, cleats, and adjustable hangers, ensuring load distribution and dimensional stability. Gypsum components to be formed using 12.5 mm thick boards with provision for profiles, drops, grooves, and seamless finishes; mineral fibre modules to be laid within compatible grid system for acoustic performance; MDF elements to be CNC-cut/form-finished and integrated within the ceiling layout with appropriate backing supports. Scope to include formation of cove lighting profiles with provision for LED strip installation, diffuser placement, and concealed wiring pathways without light leakage. All junctions to be treated with jointing compounds, tapes, trims, and edge beads to achieve monolithic finish. Includes necessary cut-outs, reinforcements, and coordination for MEP services (lighting, HVAC, sprinklers, detectors), ensuring accessibility and structural integrity. Installation to be completed in true line, level, and alignment. Rate inclusive of all materials, framework, accessories, labour, scaffolding, cutting, wastage, and complete execution as per approved drawings and specifications. Sqm 70 No Rupees Only

21 Providing and applying 2-3 coats of Premium emulsion finish paint of approved colour and shade ,including surface preparation by scrubbing,poolishing applying putty and poolishing to get a smmot surfaces, applying of primer coats of paint and final coats of paint shall be carried out as per specifications of the paint manufacturer for best ouput, including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. Asian/Nippon/Equivalent Sqm 800 No Rupees Only

22 Providing & fixing in position roller blinds of approved make, color, shade of varying length, approved Black out with aluminum extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. Sqm 40 No Rupees Only

ANODIZED ALUMINIUM PROFILES

23 Supply, and installation of corner guard protection system of size 25 mm x 25 mm, fixed along exposed wall edges, corners, and vulnerable junctions as per site requirements. Corner guards to be fabricated from PVC as approved, with uniform thickness, true angles, and factory-finished surface.fixing to be carried out using suitable adhesive/mechanical fasteners ensuring firm bonding to substrate, with proper alignment, verticality, and edge continuity. Includes cutting, mitring at junctions, end caps (if applicable), and finishing t to achieve neat integration with adjoining surfaces. Rate inclusive of all materials, accessories, labour, and complete installation as per approved specifications and site conditions. Mtr 300 No Rupees Only

24 Design, supply, and installation of aluminium skirting system of 50 mm height, comprising extruded anodized aluminium profiles with uniform matt finish, fixed along wall–floor junctions in true line, level, and alignment. Profiles to be cut to size, mitred at internal/external corners, and joined using suitable connectors or seamless finishing techniques. Fixing to be carried out using concealed fasteners/adhesive system as per manufacturer specifications, ensuring firm anchorage and dimensional stability. Scope includes provision of end caps, corner pieces, backing supports (if required), and proper surface preparation prior to installation. All exposed surfaces to be cleaned and protected, with final finish free from scratches, dents, or irregularities. Rate inclusive of all materials, hardware, accessories, labour, cutting, wastage, and complete execution as per approved drawings, specifications, and site conditions. Mtr 350 No Rupees Only

25 Supply & fixing of Push and Pull made up of 1mm thick stainless steel (Grade 304) and matter duly etched of size: 1.25 " x 5" Sets 10 No Rupees Only

26 Supply and installation of under deck insulation with 25mm thick open cell elastomeric nitrile rubber insulation with Class '1' FRR, smoothly stuck to the inner surface of true ceiling with suitable synthetic rubber adhesive as recommended by the insulation manufacturer Sqm 400 No Rupees Only

27 Design, fabrication, supply, and installation of reception counter (2600W x 600D x 1705H mm) using 19 mm thick commercial -grade plywood with flexi-ply for curved profiles, structurally reinforced with internal framing members. External surfaces finished with high-pressure laminate of approved shade, and countertop provided in seamless solid acrylic surface with thermoformed edges and inconspicuous joints. Includes edge banding, protective trims, necessary supports, backing framework, and complete fixing in true line, level, and alignment. Rate inclusive of all materials, hardware, labour, cutting, wastage, and execution as per approved drawings and site conditions. Nos 1 No Rupees Only

28 Design, fabrication, supply, and installation of desk-based modular linear workstation (750W x 500D x 750H mm) comprising pre-engineered panel system. Worktop to be 25 mm thick pre-laminated particle board with PVC edge banding on all exposed edges, fixed at 750 mm height. Above-desk divider to consist of 8 mm thick laminated glass with R25 radiused corners (approx. 850 x 300 mm), mounted using manufacturer-approved brackets and fittings. Below worktop to include 150 mm high metal raceway system for integrated power and data management, with clip-on powder-coated covers, cable segregation provisions, and cut-outs for socket access. Understructure to be formed with powder-coated MS frame using 40x40 mm square legs and horizontal beams as per system design, complete with adjustable levelers and intermediate supports where required. Includes vertical raceways (if applicable), cable management accessories, fastening hardware, and complete installation in alignment and level. Rate inclusive of all materials, labour, finishes, and execution as per approved specifications and manufacturer standards. Nos 41 No Rupees Only

29 Design, fabrication, supply, and installation of faculty workstation (1200W x 600D x 750H mm) with mobile pedestal (400W x 450D x 650H mm). Worktop to be 25 mm thick pre-laminated particle board with 2 mm PVC edge banding, supported on 25 mm thick side panels and 18 mm modesty panel for structural stability, complete with adjustable levelers. Worktop to include flip-up cable manager with soft-close mechanism, brush inserts, and provision for vertical junction box for power/data management. Includes under-mounted pencil drawer with smooth runners. Mobile pedestal to be made of 18 mm pre-laminated particle board with PVC edge banding, fitted with multiple drawers, telescopic channels, central locking system, and mounted on castors. Rate inclusive of all materials, hardware, cable management accessories, labour, and installation in proper alignment as per approved specifications. Nos 2 No Rupees Only

30 DEBREIFING WORKSTATION MODULE – NOMINAL SIZE 1500 (W) x 750 (D) x 750 (H) mm ALONG WITH MOBILE PEDESTAL UNIT – NOMINAL SIZE 400 (W) x 450 (D) x 650 (H) mm: Design, fabrication, supply, delivery, and installation of a faculty workstation system integrated with a mobile storage pedestal, wherein the primary workstation shall comprise a horizontal work surface established at a finished floor level of 750 mm (± permissible tolerance), fabricated from 25 mm thick factory pre-laminated particle board (PLB) of uniform core density and bonded laminate finish, with all exposed edges machine-applied with minimum 2 mm thick PVC edge banding using hot-melt adhesive technology to ensure monolithic finish and resistance to edge delamination; the work surface shall be structurally supported on 25 mm thick PLB gable-end panels acting as vertical load-bearing members in architect/client-approved finish, further reinforced by an 18 mm thick PLPB modesty panel installed in accordance with manufacturer’s structural design parameters to provide lateral stability and resistance against racking stresses, with the entire assembly resting on adjustable levellers to accommodate subfloor level variations and maintain horizontal datum accuracy; the worktop shall incorporate a factory-engineered cut-out provision to accommodate an integrated flip-up cable management module equipped with a soft-close damping mechanism to regulate closure impact and flexible bristle inserts for efficient cable pass-through while minimizing particulate ingress and maintaining visual uniformity, along with provision for a vertically mounted metallic junction box fabricated from corrosion-resistant material to facilitate organized routing and segregation of power and data cabling with concealed yet serviceable access pathways; additionally, the workstation shall include an under-mounted single pencil drawer unit designed for light-duty storage with smooth-operating runner mechanism conforming to standard durability and load performance criteria; the scope shall further include a mobile pedestal unit of nominal dimensions 400 mm width, 450 mm depth, and 650 mm height, fabricated entirely from 18 mm thick pre-laminated particle board (PLPB) in approved shade with all exposed edges finished using matching PVC edge banding, comprising a multi-drawer configuration mounted on lockable castor wheels to enable mobility and positional stability, and incorporating a centralized locking system for simultaneous securing of all drawers, with overall construction ensuring adequate structural integrity, alignment precision, and operational reliability under regular usage conditions; all materials, components, fabrication processes, and installation practices shall strictly comply with relevant standards, manufacturer specifications, and approved shop drawings, and any deviations in specification, finish, or dimensional tolerances shall be subject to prior review and approval by the architect/consultant. Nos 1 No Rupees Only

31 Design, fabrication, supply, and installation of raised dais platform (4000W x 1200D x 300H mm) constructed using 19 mm thick commercial-grade plywood fixed over a framework of treated timber/wooden battens forming a rigid substructure designed to withstand imposed loads and prevent deflection. Top surface to be finished with approved carpet flooring, properly stretched and fixed using suitable adhesive and edge grippers to ensure wrinkle-free finish and durability. Includes necessary intermediate supports, edge finishing, skirting/boxing (if required), and provision for access/maintenance considerations. The entire assembly to be installed in true level and alignment over prepared base. Rate inclusive of all materials, labour, cutting, wastage, and complete execution as per approved specifications and site conditions. Nos 1 No Rupees Only

32 Design, fabrication, supply, and installation of raised dais platform (3000W x 1000D x 300H mm) constructed using 19 mm thick BWP-grade plywood over a structurally stable framework of treated timber/wooden members, designed to resist deflection and ensure load-bearing performance. Top surface to be finished with approved carpet flooring, fixed using suitable adhesive system with proper stretching and edge anchoring to achieve a uniform, wrinkle-free finish. Scope includes necessary intermediate supports, edge boxing/skirting, and finishing details. Complete installation to be carried out in true line, level, and alignment over prepared substrate. Rate inclusive of all materials, labour, cutting, wastage, and execution as per approved specifications and site conditions. Nos 1 No Rupees Only

33 ROUND TABLE – NOMINAL SIZE Ø900 x 750 (H) mm: Design, fabrication, supply, delivery, and installation of a circular discussion table unit comprising a primary work surface of 900 mm diameter established at a finished floor level of 750 mm (± permissible tolerance), fabricated from 25 mm thick factory pre-laminated particle board (PLPB) with uniform core density and integrally bonded decorative laminate finish, with the entire periphery finished using machine-applied ABS edge banding of appropriate thickness to ensure impact resistance, edge protection, and seamless continuity; the work surface shall be supported on a structurally engineered metal sub-frame system consisting of powder-coated mild steel legs, treated through a multi-stage surface preparation and electrostatic powder coating process to achieve corrosion resistance and uniform finish thickness, wherein individual leg members are interconnected via a horizontal connection beam acting as a stabilizing element to enhance structural rigidity, minimize lateral deflection, and distribute imposed loads uniformly across the support system; the leg assembly shall be provided with precision-adjustable levelling devices at the base interface to compensate for floor undulations and ensure planar stability and alignment with the finished floor datum; the table top shall further incorporate a factory-integrated cut-out provision accommodating a recessed flip-up cable management module equipped with a soft-closing hinge mechanism to control operational movement and reduce impact stresses, along with flexible bristle inserts to facilitate organized cable routing while minimizing dust ingress and maintaining visual and functional integrity; the entire unit shall be manufactured and installed in accordance with approved technical specifications, ensuring compliance with relevant standards, dimensional tolerances, and performance requirements as stipulated by the consultant/architect. Nos 11 No Rupees Only

34 Side table with Glass top Round (600mm-dia x 450 mm-H) Nos 1 No Rupees Only

35 Side table with Glass top (860mm x 300mm x 450mm LBH) Nos 2 No Rupees Only

36 PEDESTALS - Fabrication, Supply & Installation of Pedestal with the following specifications. Finish 18mm thick PLPB of approved shade. Mobile pedestal unit is made of 18mm thick PLPB with matching PVC edgebanding as per approved finish, With drawers, lockable castors & centralized lock Nos 3 No Rupees Only

37 Supply of Planter Box without plant. Nos 5 No Rupees Only

38 Reception & Waiting area - 1 seater sofa Nos 5 No Rupees Only

39 Reception area - 2 seater sofa Nos 2 No Rupees Only

40 Supply of High back chairs for Faculty room Nos 2 No Rupees Only

41 Supply of medium back chairs for workstations,Debriefing rooms ,Faculty room,Reception. Nos 91 No Rupees Only

42 Supply and fixing of White Board ( Lacquered glass )- of size 1200 x 900 mm - Faculty room & Debriefing room Nos 4 No Rupees Only

43 Supply and fixing of Pinner board Nos 2 No Rupees Only

B ELECTRICAL WORKS

1 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

0.0 3 x 1.5 sq. mm Mtrs 550 No Rupees Only

0.9 3 x 2.5 sq. mm Mtrs 1200 No Rupees Only

0.0 3 x 4 sq. mm Mtrs 750 No Rupees Only

0.9 2 x 6 sq. mm Mtrs 690 No Rupees Only

2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

0.0 25 mm Mtrs 850 No Rupees Only

0.0 32mm Mtrs 390 No Rupees Only

0.9 50mm Mtrs 380

3 Supply and installatizing following size of perforated painting with powder coating M.S cable tray with perrforation not more than 17.5% in conveneient section joined with connector suspendedd from the ceileing with M.S suspenders including bolt & nut, painting suspenders etc. as required.

0.0 150mm widthx50mm deepthx1.6mm thickness Mtrs 210 No Rupees Only

0.0 300mm widthx50mm deepthx1.6mm thickness Mtrs 180 No Rupees Only

4 Earthing with copper earth plate 600mmx600mmx3mm thick including accesoreis and providingg enclosure with cover plate having locking arrangeents and watering pipes of 207 meter long etc. with charcoal,salt,sand as required. Set 2 No Rupees Only

5 Supply and laying 25mmx5mm GI strip 0.50 metre below ground stripe as earth electrode including coneection termination nut bolt, spring washer as required. Mtrs 180 No Rupees Only

6 Providing and fixing 4.00 mm dia copper wire on surface or inrecess for loop earthing as required Mtrs 120 No Rupees Only

7 Supplying and making end termination with brass compressiongland and aluminium lugs for following size of PVC insulatedand PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.

0.9 3½ X 150 sq. mm (57mm) Each 8 No Rupees Only

0.0 4x16Sqmm Each 8 No Rupees Only

0.9 4x10Sqmm Each 8 No Rupees Only

8 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar,common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required.Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.)

0.9 4 way (4 + 12), Double door Each 2 No Rupees Only

0.9 8 way (4 + 24), Double door Each 1 No Rupees Only

0.0 12 way (4 + 36), Double door Each 1 No Rupees Only

9 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

0.9 6 pin 15/16 A socket outlet Nos 10 No Rupees Only

0.9 15/16 A switch Nos 10 No Rupees Only

0.0 5A/6 A switch Nos 190 No Rupees Only

0.0 2 way 5/6 A switch Nos 10 No Rupees Only

0.0 3 pin 5/6 A socket outlet Nos 40 No Rupees Only

10 Supply and fixing of following Size/GI box along with modular base and cover plate for the modular switches in recess as required

0.9 1 or 2 module(75mmX75mm) Nos 50 No Rupees Only

0.9 3 Module (100mmX75mm) Nos 120 No Rupees Only

0.0 4 Module (125mmX75mm) Nos 60 No Rupees Only

0.0 6 Module Nos 10 No Rupees Only

11 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

0.9 63 A TP&N Each 2 No Rupees Only

0.9 160 A TP&N Each 1 No Rupees Only

12 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

0.9 250 A,50KA,FPMCCB Each 2 No Rupees Only

0.9 400 A,50KA,FPMCCB Each 2 No Rupees Only

0.0 125 A,36KA,FPMCCB Each 2 No Rupees Only

0.0 100 A,30KA,FPMCCB Each 1 No Rupees Only

13 Supplying and fixing 5 A to 32 A rating 240/415 V 10kA C curve MCB suitable for inductive load of following poles in existing MCB DB complete with connections, testing and commissioning.

0.9 10A/16A/20A Single Pole Nos 72 No Rupees Only

0.9 32A Douple Pole Nos 5 No Rupees Only

0.0 32A Triple Pole Nos 5 No Rupees Only

14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Nos 20 No Rupees Only

15 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

0.9 40 A Nos 4 No Rupees Only

0.9 63 A Nos 3 No Rupees Only

16 Supplying and drawing of UTP 4 pair LSZ 23AWG twisted pair cable in exisitng conduit/surface reccessed CAT 6 unshield twist pair ,4 pair should be compiled as per UL/ETL verfication program for complince withANSI/TIA 568.2-D standard outer diametre in the range of 5 to 60 degree pending radius<4 cable diameter at 5to +/- 1 degree and pulling force 1.5 kg etc complete as required.

0.0 1run of cable Mtrs 950 No Rupees Only

17 Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 μm and 125 ± 0.7 μm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cut- off wavelength < 1260 nm i/c splicing & marking etc complete as required.Single Mode 6 Core Optical fiber cable

0.0 Single Mode 6 Core Optical fiber cable Mtrs 20 No Rupees Only

18 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

0.0 Copper Patch Cords of length 1m (3ft) Each 300 No Rupees Only

0.9 Copper Patch Cords of length 1m (3ft) Each 24 No Rupees Only

19 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel.24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. Each 5 No Rupees Only

20 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required Each 450 No Rupees Only

21 Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modularplug supports 4 twisted pairs, 8 positions, 8 connectors. Housing: PC, UL94V-2, transparent color Use for 24- 26 AWG stranded wires etc. complete as required Nos 250 No Rupees Only

22 Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices nd terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required.

0.0 24 Port LIU Each 1 No Rupees Only

23 Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC to SC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 μm,iber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, ype -- LC-LC Duplex etc complete as required. Each 2 No Rupees Only

24 Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 r black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1number, etc. complete as required. Each 1 No Rupees Only

25 Supplying and drawing of following pair 0.5mm dia FRLS/HFFR PVC insulated anneled copper conductor ,unarmoured telephone cable in the exisitng surface/recessed /PVC conduit as required.

0.0 2 Pair Mtrs 650 No Rupees Only

26 Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Nos 90 No Rupees Only

CCTV Surveillance

27 Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following specifications, type of lens and features etc.Wide Dynamic Range:- WDR (120db or more)&Ethernet: 1 RJ 45 10/100 Ethernet port Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE IR life: 40000 hours or higher

0.0 2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed lens Nos 6 No Rupees Only

28 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) ith camera licenses to record for all channels having specifications and features etc as mentioned below :Alarm Notification should be linked with Recording,snapshots, Camera external alarm output, buzzer,logs, presets and email.Should support multiple video contented analytics based on camera

0.0 08 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9, 2nd screen: 1/4/8/9 Each 1 No Rupees Only

29 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface , BSMI ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

0.0 2TB/4TB (Terabytes) Each 1 No Rupees Only

30 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. Each 1 No Rupees Only

Security System/ fire Alaram

31 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections,interconnections as required.

0.0 4 Zone Each 1 No Rupees Only

32 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. Nos 15 No Rupees Only

33 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. Nos 4 No Rupees Only

34 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Nos 2 No Rupees Only

35 Supplying, installation, testing & commissioning of dressable fire control module complete as required. Nos 1 No Rupees Only

36 upplying, installation, testing & commissioning of smoke detector /MS Dwith builtin LED and mounting base complete with all connections etc. as required. Nos 20 No Rupees Only

37 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. Mtrs 350 No Rupees Only

38 Supply installation testing and commissioining of online 30“KVA UPS system with three phase input and three phase out put of 415V,50 HZ supply with operating voltage of 480 V. with LCD display system Make : EATON Model : 93 E XS Model. Each 1 No Rupees Only

39 Supply and Fixing of 12V,42AH SMF sealed maintenace free VRLA/AGM battery industrial segemnt SMF battery for UPS inveter lead acid storage batteries and provide 30 minutes back supply including all accessories. And all batterries are mounting position etc. Nos 40 No Rupees Only

40 Supply and Fixing of Battery link cable U2 Uninvyin - 10 SQMM multi core cable with complete standard rating copper lug for series connection and battery cap for all connection and accesoreies and batteries are located in single metal stand in in user free distance. Job 1 No Rupees Only

41 Supplying and fixing of following sizes of medium class flexible metal conduit hose making good the same in case of surface hanging. 25 mm Mtrs 150 No Rupees Only

42 Supply and fixing of 10 pair krone DP metal box with all accessoreis Nos 2 No Rupees Only

43 supply and fixing of 10pair krone Nos 2 No Rupees Only

44 Supply and drawing of 10 Pair , 0.5mm dia FRLS PVC insulated copper conductor armoured telephone cable in the surface recessed as required Mtrs 90 No Rupees Only

45 Supply and fixing of vertical type MCCB metal Enclosure box with the provision of 250A MCCB incomer Size II IP 30 IK08 (Cat: CM909960000) and abolt and nut accessoreies.(Without MCCB) Nos 1 No Rupees Only

46 Supply and fixing of vertical type MCCB metal Enclosure box with the provision of 125A MCCB incomer Size I IP 30 IK08 (Cat: CM9100310000) bolt and nut fixing and all accessoreies.(Without MCCB) Nos 1 No Rupees Only

47 Supply Installation & Testing of 36W diffused type LED panel light with all accessories like low loss high frequency electronic drives and fixing the same in the wall/celling with screws, hardwares as required Nos 60 No Rupees Only

48 Supply Installation & Testing of 12W diffused type LED downlight with all accessories like low loss high frequency with powder coated and stable illumination lighting Nos 40 No Rupees Only

49 Supply Installation & Testing of LEDtrip Lights fixed on aluminium profile channel with diffuser for heat discipation taping with complete with suitable wattage Per Meter 85 No Rupees Only

50 Supply of 31/2 core x185 Sqmm Aluminium armoured XLPE 11000V LT cable for tapping power supply from the exisitng feeder power panel in the exsitng cable tray with all the accessoreis. 31/2 core (3.5C)x150 SQMM Mtrs 120 No Rupees Only

51 Supplying and Laying following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable as required. No Rupees Only

0.0 1X 10 sq. mm Mtrs 240 No Rupees Only

0.0 1 X 16 sq. mm Mtrs 220 No Rupees Only

52 Supply and Installation of CISCO C1300-24T-4X High-density port configuration with 24x 10/100/1000 ports 4x 10 Gigabit SFP+ uplink ports for high-speed connectivity, 256 Gbps switching capacity for superior performance Energy-efficient design for reduced power consumption with complete testing and commissioning. Nos 2 No Rupees Only

53 Supply of Extended Handed Operating arm handle for the Following MCCB switch with required spreader terminal for connecting the MCCB’ s wherever necessary arrangements in the new add on Panel. Nos 5 No Rupees Only

54 Charges towards erection of the below mentioned switches with Extended hand operated handle set along with the required Spreader Terminals in the above mentioned panel[Item No:01] 1 No,350A,TPN MCCB, &400A -2 2.250A,TPN MCCB -2Nos, 3 Nos of 125A TPN MCCB-1 Job 1 No Rupees Only

55 Supply and modification of Existing 240A,Vertical , Al.Bus bar arrangement into 630A TPN ,Vertical Al.Bus bar arrangement and the same to be connected to the existing main panel’s bus bar arrangement. Job 1 No Rupees Only

56 Supply Erection, Testing commissioning of Add-on block panel with the provision of erection of 1 No,350A,TPN MCCB, 2 No,250A,TPN MCCB, 2 Nos of 125A TPN MCCB. Including scope of attaching this panel with the existing panel. [Excluding supply of MCCBS] Job 1 No Rupees Only

1 Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 0C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40 and <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building). The work should also include making holes on walls, glass, providing Pedestal, plastering etc., as per site requirement. For Cooling or Heating or Both

0.0 28 HP Nos 1 No Rupees Only

0.9 22 HP Nos 1 No Rupees Only

2 Supply, installtion, testing and commissioning of VRV/VRF Ceiling Mounted Ductable type indoor units equipped with washable synthetic media pre-filter, coil section with DX coppercoil, electronic expansion valve, outer cabinet, vibration isolators, drainpan, multispeed fan motor and other necessary supports etc., The blower shall be dynamicaly balanced and designed for silent operation.Wireless Remote Included

0.0 11 TR Nos 2 No Rupees Only

0.0 18 TR Nos 1 No Rupees Only

3 Supply, installation, testing and commissioning,Transmission/Communication cabling, of 2,3 or 4 core copper cable of the required gauge thickness, as required for interconnecting the Indoor and Outdoor Units of all the VRV/VRF Units for proper performance. Rmt 120 No Rupees Only

4 Supply, installation, testing and commissioning of interconnecting insulated copper tubing, for refrigerant liquid and suction lines between the Outdoor and Indoor Units complete, including fittings like elbows, reducers etc. and suitable wall / ceiling clamps as required for the complete installation and proper functioning of the VRV/VRF system. The suction lines shall be insulated with 19 mm thick and discharge lines shall be insulated with 13mm closed cell antimicrobial nitrile rubber flexible hose insulation Rmt 100 No Rupees Only

5 Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

0.9 Indoor Units Nos 3 No Rupees Only

0.0 Outdoor Multi Joint Nos 2 No Rupees Only

6 Supply and installation of PVC drain pipe with 6mm nitrile rubber insulation ISI marked, connecting the drain lines from the indoor units to floor sump to be concealed or to be laid as per site required with as may be decided by Engineer-in-charge.

0.9 32 mm Rmt 60 No Rupees Only

7 Supply and installation of 20A-25A 3 pin metal clad plug and socket with 20A-25A MCB with suitable powder coated sheet steel enclosure with fixing accessories etc Nos 3 No Rupees Only

8 Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

0.9 19mm Sqmt 150 No Rupees Only

9 Supply, installation, testing and commissioning of Acoustic duct lining using 12mm nitrile rubber insulation open cell type inside the ducts, antimicrobial protection at the outlets of all indoor units upto 3m distance from fan outlet as per spec provided. Sqmt 30 No Rupees Only

10 Supplying and fixing of flexible connection made out of fire-retardant, lint-free double canvass connections of heavy gauge of required sizes for CSU's with necessary bolt, nut, screws, gaskets etc as required Nos 3 No Rupees Only

11 SITC of Aluminium Extruded Fresh air louvers with wire mesh and birds screen for IDUs/CSUs as per specifications. Sqmt 0.38 No Rupees Only

12 Supplying, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation to IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

0.9 Thickness 0.63mm sheet Sqmt 150 No Rupees Only

13 Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

0.9 Thickness 0.63mm sheet Sqmt 15 No Rupees Only

14 Supplying, Fixing, installation, testing and commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required. Sqmt 12 No Rupees Only

15 Supplying, Fixing, installation, testing and commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required. Sqmt 12 No Rupees Only

16 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

0.0 3 x 4 sq. mm Rmt 75 No Rupees Only

0.9 3 x 6 sq. mm Rmt 75 No Rupees Only

17 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

0.0 25 mm Rmt 200 No Rupees Only

Total Amount in words : No Rupees Only

Note: The Bidder, at the Bidder’s own responsibility and risk, is encouraged to visit the Site of Works and obtain all information necessary for preparing the Bid. The Bidder shall quote his price which should include GST. In case of discrepancy in the rates quoted in words and figures, the rates in words will be considered for evaluation.

Digital Signature of Bidder