Special Repair to Bath rooms (T-11, T-12, T-13 and T-14) of Adm Camp , (T- 23 and T-24) of CUL -2 and Cook Houses (T-168 , T-169, T-170 and T-171) of Cul -4 at South Camp, Mahajan Field Firing Ranges (MFFR) under AGE (I) MFFR

Dismantling of wall and ceiling boards or insulation boards with Frame Of Mild Steel , any thickness,any description, including cover fillets complete all as specified and as directed.

S &F Anodised aluminium ( size of grid 605x605mm) snap grid frame work for false ceiling, snap grid ( main/cross tee section ) shall be supported at the ends all along the wall with anodized aluminium angle of size 40mmx25mmx2mm , weighing 0.36 kg per R/M as per SSR-2009 para 10.38.01 complete all as specified and as directed.

M&L 6mmthick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.5 Sqm each complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed. Note - scaffolding and security arrangement will be of contractor .

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fireretardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 150 mm long complete all as specified and as directed.

S & F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for MS work as in hold hast etc. complete all as specified and as directed.

S&F 100mm long butt hinges, cold rolled mild steel /SS medium weight complete all as specified and as directed.

S&F Aluminium alloy, anodised/SS sliding door bolt 300 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F 150 mm long Mild steel/SS barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S & F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement laid in panels incl making joints 12 mm wide to the full depth of pcc at every 3 mtr and at every changes o direction and fill the same with & incl betumin and sand 1:3 by weight complete all as specified and as directed.

Taking down cement or cement lime plaster/ grit, terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height ).

M&L for Rendering 15mm thick on fair faces of brick in cement mortar 1:4 finished even & smooth without using extra cement with using liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. (Note :- Water proofing compound shall be measured and paid separately)

Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall ,3mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth and applying two coat of oil bond distemper on walls complete all as specified and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment of walls incl paillars etc. by mechanical equipment like electric wall sander and applying two coats of oil bound distemper using rollers over a coat of primer incl 3mm thickwall care putty in two layers complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl for preparation of newly plastered surfaces of wall & chajjas complete all as specified and as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint over a coats of alkali resistant priming paint complete all as specified and as directed.

M&L for Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old /painted surfaces of steel surfaces of any description not otherwise described over 10 cm in width or girth with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate in any position in floor/roof complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles area exc 0.11 sqm but not exc 0.18 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors laid over & incl 20 mm thick screed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and as directed.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer complete all as specified and as directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Rounding to eadges to stone slab one edge , such as in steps , cooking plate and other similar situation complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for 20-25mm thick machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick cement plaster in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for Jodhpur stone slabs, self faced 10 cm thick, 25 to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in floor over stone patti roof slab fininshed the surface even and fair without using extra cement complete all as specified and as directed.

Demolition of Brickwork , built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified.

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming complete all as specified and as directed.

M&L for Providing pre- cast reinforced cement concrete 1: 2 :4 using 20 mm graded stone aggregates in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone or concrete or bricks surrounds glazesd with putty complete all as specified and as directed.

S&F Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed. Note - scaffolding and security arrangement will be of contractor .

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F in repairs Bib taps brass cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore GI pipe complete all as specified and as directed.

S&F in replairs Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan head fancy type chromium plated, screwed down, high pressure with long screwed shank and fly nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and as directed.

S&F in repair PVC grating 125 mm dia complete all as specified and as directed.

S&F in repairs Stop valves/angle valves , cast copper alloy screwed down, high pressure, brass with crutch or butterfly handle, screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm bore complete all as specified and as directed.

S&F in repairs Stop valves, cast copper alloy, screwed down, high, fancy type chromium Plated , pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 20 mm bore complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size with swivel joints, fixed in repairs complete all as specified and as directed.

S & F in repair Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm dia (minimum weight 210 Gms) and fixed complete all as specified and as directed.

M&L for Vitreous china wash basin, white, flat back, size 550 x 440mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete including cover, flush pipe incl all joints complete all as specified and as directed.

S & F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and as directed.

S&F Vitreous china bowl urinal Haif stalf type, white, with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including providing 32 mm bore PVC waste pipe and 25 mm bore light grade GI flush pipe complete all as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bends (any radius), disminishing pieces or tappers 110mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) bends (any radius), disminishing pieces or tappers 75mm dia with access door complete all as specified and as directed.

S&F in PVC Pipe (SWR) branch pieces ,Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 110 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore P traps complete all as specified and as directed.

S&F, fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutter glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass, and wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc all as specified below including taking down old window, complete all as specified and as directed:- (a) Frame (top & side ) section shall of size 92.00x31.75x1.50mm (Section o 20831). (b) Frame (bottom) section shall of size 92.00x31.75x1.50mm (section No 20832). (c) Top & side members of shutter section shall be of size 18.00x40.00x1.55mm (Section No 20738). (d) Shutter interlock section shall be size 18.00 x 40.00x1.45mm (Section 20737) (e)Bottom members of shutter section shall be size 18x40.00x1.55mm (Section No 20736)

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sectionweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square n. exc 0.5 sqm of any thickness in each pane for metal frames complete all as specified and as directed.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 1000 lit but not exc2000lit complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 2000 litres, (cylindrical vertical tanks with closed top) triple layered, hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified. Notes :- (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and ball valve as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description complete all as specified and as directed.

S &F Rolled mild sections in Joist, channel, angle, or tee sections, fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to FE-410-W ( Gde -E-250) quality A . complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exc 10cm long and dia of shank 5 to 10 mm complete all as specified and as directed.

S&F Steel work in tabular tresses including special shape washer etc. complete using ERW for induction but welded to confirming to IS 1161-1979 grade ST-240, confirming to Fe 290 Grade E-165 complete all as specified and as directed.

S&F Plate ( plain or chequrred ) channels, square, cut notched ( oridinary and counter sank) forming holes , without any attachment confirming to Fe 290 Grade E-165 complete all as specified and as directed.

S&F mild steel 300mm ordinnary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges , complete all as specified and as directed

Demolation of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in surface channel and drains complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edge. complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

De-watering from septic tank /soakage wells by suitable pumps and also removing of all wastes , semi solid and liquid of any description to the location complete all as specified and as directed. Note- de watering tank will be taken out side the defence land for desposal.

De-sludging by removing of semi solid sludge from existing septic tank /soakage wells of any depth, any capacity in foul conditions , including taking and placing in position the manholes covers of any despcription removal of sludge and solid contents to any place out side defence land and deposited where directed complete all as specified and as directed.

S&F in repairs, Gun-Metal Globe or gate valve with iron wheelheed ends for irion pipe for 25mm bore and fixed complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for Point wiring for one light point/fan point/exhaust fan/bell point with FRLS copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and sheathed of size 2.5 Sq mm single core multistand in and including PVC concealed conduit Medium class 25 mm dia ISI marked with all fittings such as tees, bends, MS sunken box,modular plates as per site requirement for one fan/ light/Exhaust fan or 5/15Amps socket or bell/buzzer point controlled by one switch including provision of 2.5 Sqmm PVC insulated sheathed copper conductor cable, single core multistand as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.

All as per item No 113 here-in-before but socket point on the 5/6A independent board with other switches complete as specifed as directed by Engineer - In - Charge.

All as per item No 113 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge.

All as per item No 113 here-in-before but cable of 4 Sq mm for 15 Amp switch socket outlet on independent board including provision of 4 Sqmm PVC insulated unshethed multistranded copper conductor as earth wire complete as specifed as directed by Engineer - In - Charge.

Supply and fixing Modular switch 1 way 6A, 1 modul complete as specifed as directed by Engineer - In - Charge.

Supply and fixing Modular switch 1 way 16A, 1 modul complete all as specified and as directed by Engineer-in-Charge .

Supply and fixing Socket, 6A - 2/3 pin combined 2 modul complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Socket, 16A - 2/3 pin combined 2 modul complete all as specified and as directed by Engineer-in-Charge .

Supply and fixing LED inverter battery 20W CDL, tube light energy efficient with backup of 3 hrs autocut off features atfull charge, high lumen 100 lum/W complete with all accessories as directed by Engr-in- Charge.

Supply and fixing in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as per Philips Cat No-RC383B P LED 36S-6500 G6 PSU OD WH PIR P or equvalant out of makes specified in list of makes.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as specifed as directed by Engineer - In - Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete as specifed as directed by Engineer - In - Charge.

Supply and fix heavy duty exhaust fan, Turboforce Gery steel body AC single Phase. 230V of size 450mm sweep with,70 Watt blades, and frame and louvers, sound level-55-60dB complete as per Havells model no-FHEHDSPDB189 or Equavelent out of makes specified in list of makes.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete as specifed as directed by Engineer - In - Charge.

Supply and fix LED street light 35/36 W High performance low wattage street light delivering 120 lumen/watt with high power LED light source with IP66 protection, PDC housing and high impact resistance (IK08) polycarbonate cover luminaire including suitable bracket and clamp for fixing on wall complete as per philips cat no-BRP331 LED36 CW R5N PC PSU S1 V1 or equvalent out of makes specified in list of makes.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete as specifed as directed by Engineer - In - Charge.

Supply and Fixing MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete as specifed as directed by Engineer - In - Charge.

Supply and Fixing MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete as specifed as directed by Engineer - In - Charge.

S&F sub main wiring in PVC concealed conduit with 2 single core 6sqmm multi-stranded PVC insulated cable sheathed 1100 volts grade with one earth wire of 6 sqmm copper conductor cable connected to common earth and earth dolly complete as specifed as directed by Engineer - In - Charge. (Note two run of 6 sqmm and one run of 6 including PVC conduit sqmm will be measured as 1 RM.

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed by Engineer-in-Charge. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate.

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 12 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed by Engineer-in-Charge. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate.

M&L for Earthing complete with galvanized steel perforated pipe electrode 40mm bore buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.25 meter below normal ground level connected to galvanized iron 4mm dia wire as earthing lead by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 2 of SSR Part-I connected to panel/pole/bus bar complete all as specified and testing on completion, including provision of earth wire protected by 15mm dia GI light grade protection pipe from test point to main board and 1.75mtr long 20mm GI medium grade perforated at bottom watering pipe funnel, PCC earth pit and 40mm thick RCC cover reinforced with XPM of 4Kg/sqm weight and frame of angle 40x40x6mm, 2 handles of 6mm MS bar, charcoal, salt and GI wire including excavation and earth work etc complete all as specified and as directed.

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.

Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2 core complete as specifed as directed by Engineer - In - Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for route of cable and getting out complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Supply,laying of double wall corrigated pipe of outer dia 63mm and inner dia 50 mm for cable protection as per IS-16205 complete all as specified and directed by Engineer-in-charge.

Supply and fix lamp holder, with 12W rechargeable LED PVC/ Polycarbonate type with back plate suitable for batten fittings complete as specifed as directed by Engineer - In - Charge.

Taking down of ceiling fan/ exhaust fan/ air circulator fan from the existing position complete with disconnecting electric connection and deposit to MES store yard complete all as directed by Engr-in-charge.

Taking down of geyser from existing position and complete with disconnecting electric connection and deposit to MES store yard complete all as directed by Engr-in-charge.

Please Enable Macros to View BoQ information