WBPWD/EE/PMED/NIQ-24/2024-25

Amount

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity - 3.6 kW (minimum) ISEER-3.53 (minimum) BEE Leveling : 2-Star or higher (July22-October24) IS compliance - IS 1391 Refrigerant - R410A/ R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / O General / Daikin]

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity - 6.6 kW (minimum) ISEER-3.53 (minimum) BEE Leveling : 2-Star or higher (July22-October24) IS compliance - IS 1391 Refrigerant - R410A/ R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric/ O General / Daikin]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including S&F of necessary fixing arrangement for indoor and outdoor unit, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC.

Supply and installation,testing & comissioning of 1.8 tr ceiling suspended cassete type AC Unit with following specification: i) IDU & ODU power supply AC single phase,220V-240V, 50 Hz, ii) Nominal cooling Capacity- 6200 watt(minimum),(680-720BEE rating 3 star(EER rating 3.8 minimum) iii)R32/R410A gas with remote control and ,fire reterdent (electronic PCB of indoor unit should be enclosed in Sheet metal box.(Make - mitsubishi Electric/ daikin/ General ) Installation have to be done with suitable support from ceiling as direction by EIC.

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of 25 mm dia. incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make approved by EIC)

Supply and laying of refrigerent copper pipe minimum thickness 1.15mm, liquid line 1/4" dia and gas line 5/8" dia(make- Royku/Mandeep) and insulation of copper pipe by nitril rubber insulation tube of minimum thickness 19mm(Make- Aroflex/Acoflex) also rapping insulation with GKB Gold raping tape.

Cutting and re-fixing of false ceiling by aluminium channel(1.5ftx1.5ft) for AC machine installation.

Supply and installation,testing & comissioning of aluminium(9ft.x5ft) door with glass incl. all.

Supplying & Fixing of 4 core 2.5 sq mm PVC insulated PVC sheathed unarmoured Copper Cable (Make: Finolex/ /Polycab/RR Kabel/Havells)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) and 2 Module GI Modular type switch board with 2 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), with plug top with indicatior (Brand approved by EIC) and without swich with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy.connections with PVC Cu wire and earth continuity wire etc [Page-E17,5]

Supply and Fixing 6 way double door horizontal TPN MCB distribution board with 1P-42/43 protection, including 100A, 4 pole MCB isolator, 18 No's 10-32A SPMCB (Make- Legrand) concealed in wall/on wall after cutting the wall and mending good the damages to original finish including inter connection with suitable size of Copper wire and neutral link & provision for earthling attachment.

S&F of suitable size single phase timer box on wall, fabricated by powder coated MS sheet (16 SWG) with locking arrangement & DIN Rail consisting of following items incl. necy. inter connection by suitable size of stranded PVC insulated 1.1kV Gr. Cu wire after crimping as per direction of EIC (A) Double door (2+8) way SPNDB with IP 42/43 protection (Make : Legrand) - 1 No. : (B) Digital timer having provision of adjustment 24 hour (Make : L&T) - 1 No. (C) 2 pole power contactor (MNX-22) (Make : L&T) - 1 No (D) 240V 25 A 10kA DIN mounted DP MCB 'C' curve (Make : Legrand/Siemens/L&T/Schneider/ABB/Hager) - 1 No (E) One no. red and one no. green 240V LED indicator (Make : L&T/Kaycee/ABB) - 1 Set (F) Toggle Switch - 1 Set

S&F of suitable size single phase timer box on wall, fabricated by powder coated MS sheet (16 SWG) with locking arrangement & DIN Rail consisting of following items incl. necy. inter connection by suitable size of stranded PVC insulated 1.1kV Gr. Cu wire after crimping as per direction of EIC :(A) Double door (2+12) way SPNDB with IP 42/43 protection (Make : Legrand) - 1 No. (B) Digital timer having provision of adjustment 24 hour (Make : L&T) - 1 No. (C) 2 pole power contactor (MNX-22) (Make : L&T) - 2 No (D) 240V 25 A 10 kA DIN mounted DP MCB 'C' curve (Make : Legrand/Siemens/L&T/Schneider/ABB/Hager) - 2 No (E) One no. red and one no. green 240V LED indicator (Make : L&T/Kaycee/ABB) - 1 Set (F) Toggle Switch - 1 Set

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm or 32 mm size (whichever is applicable) PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (AC points)

b) 4x 16 sqmm + 2x 10 sqmm as ECC (From VTPN to HTPN)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 4x 16 sqmm + 2x 10 sqmm as ECC

c) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

YOUNG ENGINEERING ENTERPRISE

RASH ELECTRICAL WORKS