Fencing work, Soil and Moisture conservative work, Digging of pits, Construction of cattle guard hut, gate Pillar and fixing iron gate

Part - A. Fencing work

Digging of ditch fencing by mechanical means of 1.2 m deep, 1.5m wide at top and 0.90m wide at bottom, includes dressing and laying of excavated soil in continuous mound and dressing of mound. (volume per running meter=1.44 cum)2.2.2.2 hectare soil between 30-50%boulders.

Providing of RCC fencing post 1:2:4 height 1.8 m using 6mm bar bars 4 nos hooks 4 nos, rings 4 nos, top 10 cmx10 cm, bottom 15 cmx 10 cm including 6 days curring.

Providing of black steel barbed wire

Part - B. Soil & moisture conservation works

Digging of contour trenches (size 45cm*45cm) separating stones from dug up soil, making mounds of the soil and dressing deep continuous contour trenches 3.2.5 hard soil between 30 to 50% boulders

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect (c) Hard soil mixed with Kankar / boulders, Morrum

Part - C. Digging of pits

4.2 digging of new pits of size 0.45*0.45*m or (0.50+0.40)/*0.45m 4.2.5hect.rd soil between 30 to 50%boulders

Part - D. (Construction of cattle guard hut)

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m disposed earth to be levelled and neatly dressed. All kind of soil.

Random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30cm thick wall in cement mortar 1:6

Brick work with F.P.S. bricks of class designation 75in supwrstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 Total,Deduction,Window,Gate,Total

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :25 mm thick.Total,Deduction,Window,Gate,Total

Random rubble dry stone kharanja under floor,Rooms

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer door & window

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. Add extra for double leaf shutters

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: 12.37.1 New work (two or more coats) over and including scrapping and priming coat with cement primer.Deduction Gate,Window,total deduction

Part - E. (Construction of gate pillar & fixing iron gate)

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m disposed earth to be levelled and neatly dressed. All kind of soil.Pillars,Wall

Random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30cm thick wall in cement mortar 1:6 Pillars,Wall

Brick work with F.P.S. bricks of class designation 75in supwrstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 Pillars,Wall

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :25 mm thick. Pillars,Wall

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: 12.37.1 New work (two or more coats) over and including scrapping and priming coat with cement primer. Pillars,Wall