REPAIR MAINT OF INTERNAL WIRING SUB MAIN WIRING MCCBS LIGHT FITTINGS WITH OTHER INTERNAL WIRING AR ORS MD ACCN AT VNC DOMLUR NP LINES GNC LINES RMH LINES MD ACCN AND OTHER CONNECTED AREA UNDER GE CENTRAL BANGALORE

Amount

Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete.

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including new heavy grade PVC rigid conduits 20mm or higher dia as reqd at site, fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated in & including suplly & fix new PVC board closed recessed, fixed on wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light /fan / bell point controlled by one switch

All same as per item No 2 here-in-above but for One 3 pin socket point 5 Amp on independent board -do-

All same as per item No 2 here-in-above but for One 3 pin socket point 5 Amp on same board with other switches

All as per item No. 2 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including new heavy grade PVC rigid conduits 20mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling etc ; by means of saddles and clips etc; including all conduit accessories / fittings / junction boxes / inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light /fan / bell point controlled by one switch

All same as per item No 6 here-in-above but for One 3 pin socket point 5 Amp on independent board -do-

All same as per item No 6 here-in-above but for One 3 pin socket point 5 Amp on same board with other switches

All as per item No. 6 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

Point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and all accessories including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light / fan / bell controlled by one way switch.

All same as per item No 10 here-in-above but for One 3 pin socket point 5 Amp on independent board

All same as per item No 10 here-in-above but for One 3 pin socket point 5 Amp on same board with other switches.

All as per item No. 10 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

Supply and fix Switch piano, flush button single pole, 5 Amps one way.

Supply and fix Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose

Supply and fix Switch socket combination flush type 6/16 Amps 3/3 pin universal multipurpose

Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan.

Supply and fix in repair Switch sokcet combination with Gang box flush type 5 Amp 3/5 pin universal muliti purpose

Supply and fix in repair Switch socket combination with Gang box flush type 5/15 Amps 3/5 pin universal multipurpose

Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks. Make : Anchor/Havell/Polycab

Supply and fix in repair Switch piano, flush button single pole, 5 Amps one way.

Supply and fix in repair Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose

Supply and fix in repair Switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose

Supply and fix in repairs modular switch 1 way 6A,1 module

Supply and fix in repairs modular switch 1 way 10A,1 module

Supply and fix modular switch 1 way 20A,1 module

Supply and fix socket, 6A-2/3 pin combined 2 modules

Supply and fix socket, 10A-2/3 pin combined 2 modules

Supply and fix socket, 16A-2/3 pin combined 2 modules

Supply and fix Angle / surface mounted bulb holder with screws & other mounting accessoried complet all as directed.

Supply and fix electronic moduler fan Requlator, 120 W-2 modules , 230Volts AC

Supply and fix white cover plate with frame 2 modules complete Make model Glint or eqvalent model of Havells/Anchor

Supply and fix white cover plate with frame 3 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix white cover plate with frame 4 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix white cover plate with frame 6 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix white cover plate with frame 8 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix white cover plate with frame 12 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 2 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 3 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 4 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 6 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 8 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix Matel flush box 12 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Fan regulator electronic, step & switch socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan.

Supply and fix in repairs socket, 6A/16A-2/3 pin combined 2 modules

Supply and fix in repair Fan capacitor 2.5/3.15 mfd suitable for 1200/1400mm sweep ceiling fan.

Supply and fix switch bell push button single pole 5 Amps 230 Volts one way complete allas directed.

Supply and fix in repair Door bell electronic, music type, 230 volt AC.

S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

Taking down existing light fittings fixed in any description S&F security light light fittings 1x 25 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed.

S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole complete all as specified and directed.

Supply and fix in replacement Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified.

Supply and fix in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

All as per item No 54 here-in before but SPN 4 ways DB.

Supply and fix in replacement MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity

Supply and fix in replacement MCB single pole & neutral 40 Amps 240 volts, C series,10 kA rupturing capacity

Supply and fix in replacement MCB Tripple pole & neutral 40 to 100 Amps 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified.

M&L for taking down and dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng one, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing including rewinding of ceiling fan by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding etc & finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing ,reassembling , refixing the same in same or different location asordered & finally testing the fan , complete all as directed. Note : (i) Spare Parts/accessories found unserviceable including bearings , rewinding etc which are required to make the fan functional shall be providsed by the contractor without any extra cost to Govt as quoted rate is deemed to be inclusive for the same .(ii) Quoted rate is deemed to be inclusive of painting .

M&L for taking down and dismantling of Exhaust fan 250/ 300mm/450mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating rotor and stator assembly, locating the fault and making the exhaust fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng one , worn out screws of the cover, twin core flexible copper wire of size 23/0.0076, rubber pad for legs, oiling and greasing etc, including rewinding of ceiling fan by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding etc & finally paint the exhaust fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing, reassembling & testing the fan complete all as directed. Note :- (i) (i) Spare Parts/accessories found unserviceable including bearings , rewinding etc which are required to make the fan functional shall be providsed by the contractor without any extra cost to Govt as quoted rate is deemed to be inclusive for the sam (ii) Quoted rate is deemed to be inclusive of painting .

Taking down unservicable ceiling fan any sweep , model , fixed in any description & Supply and fixing ceiling fan complete with blades,down rods,electronic regulator and accessories,230 V,1200 mm sweep.Min air delivery 210 CFM with service value 6 BEE,Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charge.(Note : The unservicable fan & down rod to be deposited to E&M Central store without any extra cost to Govt.).

Taking down unservicable exhaust fan any sweep , model , fixed in any description & S & F exhaust fan sweep made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 200 mm with self closing louvers and blades fixed in position after necessary cutting wall to size if required as ordered to fix the fan as per manufactuers instructions , making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as directed . .Make :- Havells/ Usha/ Crompton (Note :(i) The unservicableExhaust to be deposited to E&M Central store without any extra cost to Govt. (ii) The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

Taking down unservicable exhaust fan any sweep , model , fixed in any description & S & F exhaust fan sweep made of metal body complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 300 mm withself closing louvers and blades fixed in position after necessary cutting wall to size if required as ordered to fix the fan as per manufactuers instructions , making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as directed . .Make :- Havells/ Usha/ Crompton(Note :(i) The unservicableExhaust to be deposited to E&M Central store without any extra cost to Govt. (ii) The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

Taking down old existing sub main wiring and provide new submain wiring with 2 runs of 4 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit/casing caping of size as ordered in walls / ceilings etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 4 Sqmm cable , one run 4 Sqmm cable and one run of PVC Conduit /Casing caping shall be measured as one unit length) .

All as per item No 64 here-in-above but 2 runs with 2.5 Sqmm single core cable and 2.5 Sqmm single core as earth contunity wire -do- . (Note :- 2 runs 2.5 Sqmm cable , one run 2.5 Sqmm cable and one run of PVC Conduit/Casing caping shall be measured as one unit length)

All as per item No 64 here-in-above but 2 runs with 6 Sqmm single core cable and 6 Sqmm single core as earth contunity wire -do- . (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmm cable and one run of PVC Conduit/Casing caping shall be measured as one unit length)

S&F in repair of sheet metal enclosure of size 850 x 850 x 150 mm grouted on wall/floor in PCC with nuts and bolts made out of 2.0 mm thick CRCA sheet, having 09 Nos chamber for housing of 09 energy meters and SPN MCB with Peeping glass fixed PVC frame and one MCB SPN with fixing rail and suitable busbar chamber for fixing 05 Nos aluminium strips 300 Amp capacity each making holes for fixing aluminium lugs, complete internal wiring with 6 sqmm multistranded copper cable FRLSH, epoxy based bakelite sheet of suitable size for fixing of energy meters & MCBs, including indl chamber locking system & testing on completion complete all as directed. (Note : The quoted rate includes the cost of 09 nos MCB SPN 32 Amp complete).

M&L for Earthing with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized iron earth wire 4 mm dia as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted to earth plate at one end and other end of earth wire connected to Pole / transformer / GOD / Panel / equipment body / test point /Bldg DB , GI earth wire encased in and including 15mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed including taking out old earthing.. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner

S&F stellar bright 9/10/12 Watt, B-22 LED,T-shape Bulb 230V, PF not less tha 0.85 (min). Make: Havells/ Bajaj/ Crompton Greaves/ Phillips.

Supply & fix in replacement PVC connection pipes 15mm dia for hot / cold water supply with brass adopters 600 mm long

Supply & fix in replacement thermostat for the geyser of 25 - 50 ltr capacities duly ISI Marked as per sample.

Supply & fix in replacement 1.5 KW heating element as per existing required at sites including rubber washers as per existing.

Supply & fix in replacement 2 KW heating element as per existing required at sites including rubber washers as per existing.

Supply only 1.5Sqmm copper , FRLS (Nominal Area) PVC insulated unsheathed 1100 volts grade stranded copper conductor cable .

Supply only 2.5 Sqmm copper , FRLS (Nominal Area) PVC insulated unsheathed 1100 volts grade stranded copper conductor cable .

Supply only 4 Sqmm copper , FRLS (Nominal Area) PVC insulated unsheathed 1100 volts grade stranded copper conductor cable .

Supply only PVC Casing & Caping 20 x 1800 mm

Supply only PVC Casing & Caping 25 x 1800 mm

kamadhenu Electricals (BID ID -3285192)

S R CONSTRUCTIONS (BID ID -3286243)

Varsha Enterprises (BID ID -3286261)

GS TRADERS (BID ID -3286071)

Vasavi Electricals (BID ID -3285434)

Pacific Enterprises (BID ID -3283597)

EX SOLDIERS MECHANICAL WORKS (BID ID -3285042)

Chandana Enterprises (BID ID -3284309)

UNIVERSAL ENGINEERING (BID ID -3283441)

AishwaryaConstructions (BID ID -3286329)