Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
12 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Col Alex Antony, Commander Works Engineer
Commander Works Engineer, Port Blair, Military Engineer Services, Minniebay, Junglighat PO, Sri VijayaPuram- 744 103
81329/E8 SPECIAL REPAIR TO BLDG No. P-75 AND P-76 AT VIJAY BAUGH UNDER GE HADDO, SRI VIJAYA PURAM.
2026_MES_798991_1
81329/E8
Open Tender
Civil Works
Item Rate
180 days
GE Haddo
As per NIT.
8 documents required · 8 mandatory
₹1,000
GE Haddo
₹2.2 L
Yes
16 Nov 2026
16 Nov 2026
19 Dec 2026
16 Nov 2026
12 Dec 2026
7 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc / for laying of cable/ pipe etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. | - | Cum | 383.7 | - |
| - | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. | - | Cum | 139.1 | - |
| - | Removal of surplus soil to a distance n'exc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. | - | Cum | 320.4 | - |
| - | M&L for PCC (1:5:10) Type E2 (40 mm graded aggre-gate) as in foundations, sunken portion filling and mass-concrete complete all as specified and directed. | 2 | Cum | 5,237.9 | ₹10,475.8 |
| - | Demolition of RCC n'exc 15cm thick (below or above grong level) including cutting of reinforcement to facilitate demolition complete all as specified and directed.
Note : Reinforcement obtained from demolition will be considered credit Sch as scrap iron. | 10.6 | Cum | - | - |
| - | M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 100 | Kg | 82.6 | ₹8,260 |
| - | M&L of treatment of spalled concrete cover of RCC section as per manufacturer’s instructions with and including scaffolding upto 12m height by following course of description below :-
(a) Prepration of existing surfaces like chipping of unsound weak / loose concrete/cover of reinforcement & support the structure provisionally during repair work and maintaining them in position till required
(b) Clean exist reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, etc, complete and applying two coats of alkaline rust converting primer Sika RustOff-100 or equivalent with a coverage of 350gm/sqm on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove the rust spalls, with time interval of 1 hour between the coats. | 200 | Sqm | 3,200 | ₹6,40,000 |
| 7.1 | (c) Providing and application of zinc rich epoxy antocorrosive protective coating for rebar corrosion protection system Sika Friazinc R® or equivalent in 2 coats of 0.4 kg/m2. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/mm2 according to ASTM C 882-78.
(d) Fixing additional TMT rebar Fe415 in various structural elements such as columns, beams, and slabs etc. to replace the lost rebar section due to corrosion including cutting, bending and fixing the bar by installing new rebar with Epoxy Acrylate based anchoring adhesive Sika AnchorFix 3030 Tropical or equivalent complete incl drilling of 10-16 mm dia upto 100 mm deep for rebaring complete all as specified and directed.
Note : TMT bar shall be measured and paid separatly. | - | - | - | - |
| 7.2 | (e) Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacture specification including preparation of surface by chipping and thoroughly cleaning of surface complete wherever required with with Sikadur®-32 LP or equivalent in consumption of 0.4 kg/m2. The product should comply with ASTM C 881 Type II Grade 2 Class B+C and bond strength should be 10 MPa.
(f) Rebuilding the section of structutal damaged spalled concrete or RCC elements to its original size in average thickness of 15-20mm by providing and applying with pre-batched, one component fiber reinforced cementitious patch repair mortar Sika® MonoTop® -122 F or equivalent having compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 5N/ mm2 (7 days) according to ASTM C 293-79. | - | - | - | - |
| 8 | Demolition of precast PCC block masonary work, built in cement mortar or cement lime mortar including all quoins,arches, pillars, etc and precast concrete articles complete all as specified and directed. | 4 | Cum | 590 | ₹2,360 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
Tender_81329.pdf
Tender Documents • 1.60 MB
BOQ_896376.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .