SPL REPAIR TO BLDG NO JA 128 AND GA 52 AND LA 93 AND NH 03 AT BAGRAKOTE UNDER GE SEVOKE ROAD

Amount

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified and as directed.

S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded. complete all as specified and as directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, including one coat of red oxide primer complete all as specified.

S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.

S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

S&F pressed steel frames (Size-105X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 4mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.

S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 2nd class hard wood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) all as specified and directed.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.

S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.

S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.

S&F 100mm Long Stainless Steel Butt Hinges, fixed to PVC door frame and shutter, complete all as specified and as directed

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)

M&L Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified

M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles Fe-290 Gde-E-165 complete all as specified and directed.

Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.

M&L for Brickwork with subclass B brick straight and curved on plan to exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.

Supply only integral water proofing compound complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed

M&L for preparation of new or untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed

Complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed .

M&L for preparation of new or untreated surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed

M&L for 3mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L RCC 1:2:4 , type B1, 20mm graded stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No.54 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in Skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

Taking down 15 mm bore GI pipe line including fittings and removal to store or cleaning for re-fixing complete all as specified and as directed.

Taking down 20 mm bore GI pipe line including fittings and removal to store or cleaning for re-fixing complete all as specified and as directed.

S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.

S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.

S&F 15mm bore stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed

S&F PVC connection 15mm dia with PTMT nuts of length 450mm. Complete all as specified and as directed.

S&F in repairs (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed

S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, including connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed.

S&F Vitreous China wash basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.

S&F low density 32mm bore polythene waste pipe (LDPE) complete all as specified and as directed.

S&F in repairs two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.

S&F in repairs 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.25 meter long tube with CP wall bracket complete all as specified and as directed.

S&F Bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size complete all as specified and as directed

Dismantling of 100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.

S & F 75mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m depth for foundation and cable/pipe etc. and getting out in soft/loose soil complete all as specified.

M&L for PCC 1:3:6 Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in 100mm bore pipes complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base complete all as specified.

M&L PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and as directed

M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed

M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.

M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge with fly ash modular bricks complete all as specified and as directed.

Excavating over areas n exc 1.5 m deep and getting out in soft/loose soil complete all as specified.

Excavating over areas exc 1.5 m and n exc 3m deep and getting out in any type of soil.

M&L cement concrete 1:3:6, type C-2 (using 40 mm graded stone agg) as in foundation, filling and mass concrete complete all as specified.

M&L for Brickwork with subclass B brick straight and curved on plan to exc 6 m mean radius built in C.M. 1:4 complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundarys ( for stone walling) corbwls, beackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc and Set in CM1: 4 complete all as specified and as directed.

M&L providing precast cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc and Set in CM 1: 4 complete all as specified and as directed

M&L for RCC M25 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L rendering 20mm thick in CM 1: 4 on fair faces of brick surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L rendering 20mm thick on stone or other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth without using extra cement complete all as specified.

S&F cast iron soil, waste and vent pipes, in any length with or without ear with cement joint, fix on wall 75 mm bore sand cast pipe complete all as specified and as directed.

S&F Cast iron soil cowl 75 mm dia complete all as specified and as directed.

M&L 150mm internal dia of salt glazed stone ware drain pipes grade A laid in trenches and jointed as specified.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F plain aluminium sheeting 0.56mm thick. Alloy 31000 H4 in ridges, hips, valley, gutter, drip and straight flashing (length and grith as fixed) complete all as specified and as directed

S& F 2nd class hard wood (SAL) small fittings such as bracket of any type latch hinges blocked shapped door& window stopper and cleat including all necessary labour articles not exceeding 200 cu cm each complete all as specified.

M&L for brick work with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed

M&L for Preparation of old painted surfaces of walls and applying one coat of white wash complete all as specified and as directed

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

M&L for point wiring for light/fan/call bell etc. controlled by one switch with 1.50 Sqmm (nominal area) FRLS PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable drawn through and unsheathed single core solid copper conductor cable of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, including rigid PVC concealed conduit (Medium Grade) of suitable size, with all fittings and accessories including provision of mild steel terminal boxes of suitable size made with 1.2 mm thick mild steel sheet duly galvanised and suitable for fixing switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cup washer complete for one light / fan point controlled by one switch all as specified and directed.

All as per item No. 126 here-in-before but for 5/6 Amp socket point on independent board -ditto-

All as per item No.126 here-in-before but with 2.5 Sqmm cable for 15/16 Amp socket point on independent board and 2.5 sqmm solid copper cable for earth continuity conductor.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 3 terminals complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts complete all as specified and as directed.

S&F LED tube light fittings 4 ft, 20w with aluminium batten, heavy quality complete with fixing arrangement complete all as specified and directed.

S&F SPN MCB of capacity 32 Amps, 240 volts, C curve, 10 KA breaking capacity complete all as specified and as directed.

Supply and fixing 25 watt LED street light luminaires with highly efficient lighting in & including mounting bracket made out of GI pipe light grade 25-40mm bore not less than 01 mtr long duly fixed with wall with fixing arrangement such as clamps, nuts, bolts complete all as specified and directed by the Engr in charge.

S&F MCB, SP,240 volts, breaking capacity 10 KA C curve, rating 6 to 32 amps, complete all as specified and as directed.

Taking down old serviceable/unserviceable ceiling fan, connecting wire etc and keeping at site for reuse at site after carrying out repiar works to building/rewiring complete all as specified and directed by the Engr-in-charge

Supply and fixing energy efficient, 5 star rated ceiling fan 1200 mm sweep without remote, with all acceesories and connecting up with the ceiling rose with new flexible wire of suitable size complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe light grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, including salt & charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,08Ways, double Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall all as specified and as directed

Dismantling & taking down aluminium service wire of any size including necessary disconnection from the pole / main switches etc. all as directed complete

Dismantling house service bracket any type from the wall including making good the disturbed surface complete

Supply and laying sand with approved fine grade around cable in cushioning for protection of under ground cable complete all as specified and as directed. Note:- Punned thickness shall be measured.

Supply and laying in trenches or passing through pipe 1100 volts grade armoured heavy duty XLPE insulated electric cable with aluminium conductor of cross sectional area 10 sqmm 2 core complete all as specified and as directed

M&L for laying of sub class 'B' common burnt clay brick for protection of cable complete all as specified and as directed.

S&F GI Pipe 25mm bore light grade fixed for cable protection along with wall all as specified and as directed

M&L for boring for passing the cable all as directed by E-in-C.

SRI SURAJIT SENGUPTA

M/S Bikash Saha

M/s. STRUCTURES INDIA

M S ALOK SAHA

M S BHARAT CONSTRUCTION CO.

M/S SUBRATA JOARDAR

PARTHA BISWAS AND CO