SPECIAL RELPAIRS TO INTERNAL ROAD AND PATH WAY AT 12 CARRIAPPA MARG UNDER GE (EAST) LUCKNOW

Amount

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge.

M&L for applying evenly a priming / tack coat with paving bituminous primer @ 5 Kg per 10 Sqm over old black top surfaces.

M&L for bituminious premix semi-dense asphaltic concrete 30 mm (consolidated thickness) using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, mixed in Computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 10 tonne capacity complete all as specified and directed. Note : (i) The mix design shall be got done from approved lab and got approved from GE before commencement of work. (ii) In the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted through supply only rate of Rs 41.13 per Kg of grade VG-30 bitumen. However no adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item. (The quantity of 5.5% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment)

M&L premixed bituminous macadam over primed surface of road using paving bitumen VG-30, laid/rolled by 8 to 12 tonne capacity roller and compacted to required gradient and camber (consolidated thickness 75 mm or less), binder contents of premixed macadam shall be 4% by weight of total mix (Design Mix), complete all as specified and directed.

Preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.50 mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers for achieving reflection on roads,pavementsand the like. Themoplastic requirement for glass shall be as per table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions and as directed by Engr -in-charge.

Supply and fixing cat eye reflective type of metal body alloy of size 80mm x 105mm x 22mm (shank 49.50mm) with PAMA striplens reflector of fixed with and incl MS stud of suitable size as per manufactures instructions. (Make :- Dark Eye Model No DA 53 or Equivelant.)

S&F for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed (Make :- Dark Eye Model No DA 110 or Equivelant.)

S&F For Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Make : Dark eye of make Tata / 3M / Road Star

Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil.

M&L for PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base.

M&L hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed

S&F exterior tiles of superior qulaity 400x400x 10-12mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:6 , complete all as specified Make - Somany/Johnson/Kajariya

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

M&L for brick with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

M&L for PCC (1:2:4) Type B-1, using 20 mm graded stone aggregate as in Coping

M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall all as specified and directed.

M/S KAUSHIK CONSTRUCTION (BID ID -3108664)

M/s Ramesh Chandra (BID ID -3104865)

M/s Ram Singh Agarwal (BID ID -3099512)

Matrubhoomi Construction (BID ID -3101929)