138WE/L-192/2025-26

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and/ or as directed by Engr-in-Charge.

Material and labour for 15 mm thick rendering on fair faces of brick work finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and/ or as directed by Engr-in-Charge.

Material and labour for 15mm thick rendering on other than fair faces of brick work finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and/ or as directed by Engr-in-Charge.

Preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and/or as directed by Engr-in-Charg

Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and/ or as directed by Engr-in-Charge.

Preparation of old surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of synthetic enamel paint complete all as specified and/ or as directed by Engr-in-Charge.

Complete removal of existing finishes on wall and applying two coats of cement base paint on wall surfaces complete all as specified and/ or as directed by Engr-in-Charge.

Complete removal of existing treatment on wall surface and applying two coats of Oil bound distemper complete all as specified and/ or as directed by Engr-in-Charge.

Dismantling wall, cup boards & cabinet and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, wooden panelling, wooden flooring any thickness, including cover fillet complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix wooden panelling on vertical surfaces of wall using the following specifications:- (a) Supply and fix second class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) (b) Supply and fix Horizontal runner second class hard wood @ 1.20 mtr C/C of cross sectional area exc 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment. (c) Supply and fix second class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws. (d) Supply and fix Second class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified. (e) Material and labour for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface gets smooth/glossy complete all as specified and/ or as directed by Engr-in-Charge

Material and Labour for wooden floor tiles 7 mm thick with dovetail joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, and fixed with decorative wooden beadings as per site requirement complete all as specified and/or as directed by Engr-in-Charge. Make :- Action tesa or equivalent make as approved by GE.

Material and Labour for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and/or as directed by Engr-in-Charge.

Dismantling timber scantling as in framed work over 40 Sqcm in section in any position.

Material and labour for second class soft wood clean sawn as in scantling fixed with nails as in framed work complete all as specified and/or as directed by Engr-in-Charge

Dismantling timber in fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section framed work.

Material and labour for second class soft wood clean sawn as in fillets, square, rectangular or triangular in sections fixed with nails exc 13Sqcm and not exc 25 Sqcm in section complete all as specified and/or as directed by Engr-in-Charge

Supply and fix plain glass panes of 3.0 mm thick glazing with wooden bead/putty in squares not exc 0.5 sqm in each pane for glazed and skeleton shutter or for windows etc complete all as specified and/or as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises.

Material and labour for Non-Skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge.

Material and labour for 450mm x 350mm x 7-8mm glazed ceramic tiles on vertical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thick backing coat below tile for dado/skirting CM 1:4 complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and/or as directed by the Engr-in-Charge. Note:- (a) Pillar taps and waste fittings as required shall be measured and paid separately.

Supply and fix waste fittings, brass, chromium plated for glazed ware basin etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe, complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in repairs viterous China wash down water closet pan (pedestal pattern white) including all accessories, plastic water closet seat, black, closed pattern with flat bottom, 'P' or 'S' pattern and cover and mild steel chromium plated or aluminised hinging device complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 15mm bore bib taps long or short body, fancy type, chromium plated with capstan head, chromium plated screwed down screwed for iron pipe or brass ferrule complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair 15mm bore stop cock or angle valve, fancy type, chromium plated, cast copper alloy, screw down under high pressure, screwed both ends for iron pipe or brass ferrule complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair grating doom 125 mm with waste hole of PTMT (minimum weight 25 gms) complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repairs PVC connections 15mm size with CP nuts of length 600mm complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair 600mm long towel rail (Minimum weight 270gms) fixed with chromium plated brass screws and wooden/ plastic cleats 20 mm dia, D type, complete all as specified and/ or as directed by Engr-in-Charge.

Taking up or down 25mm to 32 mm dia steel tubing/16 mm 3 layer PP-R (Polypropylene random coplymer) complete all as specified and/ or as directed by Engr-in-Charge

Supply and fix 25 mm bore 3 layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16) stabilised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to walls, ceiling or floors, complete all as specified and/or as directed by the Engr-in-Charge.

All as per serial item No. 36 above, but of size 32 mm bore pipe.

Supply and fix in repair Toilet cabinet PVC with mirror and shelves (600 x 450) etc complete all as specified and directed ( Make : Dolphine/Patel or equivalent make as approved by GE.)

Demolition and breaking up drain pipes 75mm / 110 mm dia salt Glazed ware (SWG/AC/PVC/NP) or reinforced concrete pipes set in cement mortar complete all as specified and directed by Engr-in-Charge.

Supply and fix 75mm dia PVC (SWR) pipe single socketed, in any length with rubber rings joints fixed to walls complete all as specified and/ or as directed by Engr-in-Charge.

All as per serial item No. 40 above, but of size 110mm dia (SWR) pipe.

Supply and fix 75 mm bore PVC (SWR) bend any radius complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix 110 MM bore PVC (SWR) bends any radius complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix 75 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and/ or as directed by Engr-in-Charge.

All as per serial item No. 44 above, but of size 110mm bore.

Supply and fix in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix 110 mm bore PVC ( SWR ) branch piece single 'Y' equal or unequal complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair Aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing debris off the premises, complete all as specified and/or as directed by Engr-in-Charge.

Material and labour for precast cement concrete 1:2:4 type B1 (using 20mm graded aggregate) in cover slabs (for manholes) set in CM 1:6, complete all as specified and/or as directed by Engr-in-Charge.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in repair viterous China squatting pan Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern incl bedding with PCC 1:2:4 type B-1, using 20 mm graded crushed stone aggregate complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 200mm long aluminium anodized, barrel tower bolt of extruded section ccomplete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed by Engr-in-Charge

Supply and fix in repair mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and pavings not exc 15cm thick below or above ground level and removing the unserviceable materials to a distance not exc 100m complete all as specified and/ or as directed by Engr-in-Charge.

Material & Labour for 75mm thick PCC 1:3:6 type C1 (using 40mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick in kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm etc complete all as specified and/ or as directed by Engr-in-Charge.

Supply and fix in repair Harrision rails, anodised alloy, with fixing end brackets, stops, dooms etc. complete set fixed on wall or wall panels complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair aluminium (die cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and/or as directed by Engr-in-Charge..

Please Enable Macros to View BoQ information