REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE C AREA OF AGE BR I UNDER GE MIS MHOW

Amount

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

All as per item No 02 above but except brick. Note : Serviceable bricks obtained from demolition shall be re-used.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, pillasters, cornices etc (upto G+3 storied building) scrapping down , brooming down or steel wire brushing, and washing with water after completion of precoat treatment and applying two coats of Anti fungal Weather coat paint (exterior emulsion) white or tinted over a coat of primer (X2) complete all as specified and directed. Note :- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat. application of second coat shall be approved/ passed by Engineer-in-Charge. (b) Written Warranty for four years shall be submitted by contractor for this item.

M&L for preparation of wall surface and application of following water based epoxy resin coating as a dampness treatment for internal wall including filling of cracks with CM (1:4) and making the surface smooth and finish in repair complete all as specified. (a) Complete removal of treatment / plaster (as required ) on internal walls and preparation of surface and rendering with CM(1:4) for application and making the surface wet . (b) Applying first coat of Dr. fixit Dampguard in ratio (1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs. (c) Applying second coat of Dr. fixit dampguard in ratio (1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or other equivalent as approved by GE.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size, 6 to 7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in coloured cement to match with colour of tile complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 16 above but in skirting over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

All as per item no 19 above but in skirting including 10mm thick backing coat in CM (1:4 ) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thick as in floor, coping, finish the surfaces even and smooth with using extra cement complete as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M & L for cutting holes in brick walls built in cement mortar at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

S&F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

Supply and fix in repair of wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F in repairs of pedestal pattern Vitreous china wash down water closet pan white including trap,PVC seat cover white, connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe etc complete.

S&F in repairs vitreous china urinal half stall type 350x390x600 mm (minimum) height with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified.

S&F in repairs CP brass Urinal spreader suitable for fixing in 15 mm dia pipe.

S & F in repair CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: Essco series of Jaquar or equivalent series in other makes as approved by GE.

S & F in repair 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.Make: Essco series of Jaquar or equivalent series in other makes as approved by GE..

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S&F in repair CP fancy type angle valves,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.Make: Essco series of Jaquar or equivalent series in other makes as approved by GE..

S & F in repairs CP Brass Fancy type shower rose 75 mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed.Make: Essco series of Jaquar or equivalent series in other makes.

S & F in repairs Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. Make: Essco series of Jaquar or equivalent series in other makes.

S&F in repairs health faucet with S.S. flexible pipe of 1.00 metre length including holder complete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes as approved by GE..

S&F in repairs fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes as approved by GE.

S& F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified & directed.

S & F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed.

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC tank Cover for OHT of 500 Litres capacity complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as complete all as specified and directed.

S & F in repair LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

Supplying and laying of CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S&F in repair stainles steel gratings round type 100mm size of minimum Weight 100 gms complete all as specified and directed.

S&Fin repair PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S&F in repair urinal waste coupling (Brass) 32mm complete all as specified and directed.

S&F in repair SS waste coupling (Half/Full thread) 32mm complete all as specified and directed.

S&F in repairs internal fitting(including syphon, ball valve, lever, rubber cone etc) for single flush cistern complete all as specified and directed.

S & F in repairs premium body 15 mm dia spindle for bib tap, angle valve, pillar tap etc complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

Taking up or down steel tubing 15mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S&F in repair of gun metal gate valves 15 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm all as specified and directed.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F Factory made plain solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed.

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F Plain, solid, straight chowkhats and frames of second class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S & F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S&F for 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F 150 mm size aluminium anodized handle complete all as specified

S & F in repairs for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S&F in repairs for 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F in repairs of Mild steel pressed handles 150 mm, oval type, stove enamelled black complete all as specified

S & F in repair of mild steel door closer complete all as specified and as directed

S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

M&L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed by Engineer - in - Charge .

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan incl hacking out complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S & F Mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-410 Gde E-250 Quality A complete all as specified and directed.

S&F in repair factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified.

S&F in repair steel ventilator fixed type with glazing bar complete all as specified and as directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S&F in repair Drapory/curtain rod 20 to 25mm dia of stainless steel fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw .

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed

S&F PVC ( SWR) bends any radius bore of 75 mm all as specified and directed

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacity complete all as specified.

S&F in repair 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

M&L for welding in repairs not exceeding 2.5 cm in length, to the metal not exceeding 6mm thick complete all as specified and as directed.

M & L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10 cm in width or girth and evenly applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel and iron based surfaces of any description, not otherwise described over 10 cm in width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and directed

Taking down existing aluminium door shutters of size exceeding 2.0 sqm but not exceeding 4.0sqm each and carry out minor repairs with & including replacement of minor fittings , hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. Note:wire mesh and glass as required shall be measured and paid separately under relevant items.

Taking down existing aluminium window shutters of size not exceeding 2.0 sqm each and carry out minor repairs with & including replacement of minor fittings , hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. Note:wire mesh and glass as required shall be measured and paid separately under relevant items.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete.

S&F Anodised aluminium snap grid of size 605mm x 605mm ,frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified.Note: Frame work for ceiling shall be measured and paid separately under relevant item

Taking down shutters Shutters of any description n exc 1 sqm each complete all as specified and directed

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M & L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

NIDHI CONSTRUCTION