Labour Charges for setting up of office cubicles along with wall mounted file cabinet in the newly renovated DCF WL Office, haddo

Amount

Labour charges for making Office cubicles (Size: 3.60x1.35x1.30 mtr) by using seasoned teak wood planks of thickness 25 mm and 15mm(as per architectural drawing enclosed).The planks shall be edge jointed with appropriate joints,adhesives, fasteners to form continous panels.The jointing shall be carried out in such a manner that the finished surface is perfectly aligned,smooth and without any noticeable gaps or undulation. The surface shall be made by smooth by plaining by means of plaining machine.The wall panel shall be 15mm thick whereas the side panels and divider panel shall be 25 mm thick. The tabletop shall be 25mm thick.The divider panel provided on the table top and the side panel shall consists of 8 mm thick transparent check-frosted glass(The 8 mm thick transparent check-frosted glass shall be paid seperately).The table shall include provisions for shelves to accommodate two UPS, two CPU, and two keyboard trays which shall be fitted with best quality telescopic channels(The telescopic channels shall be paid seperately).The cubicle shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges (The auto-close hingesshall be paid seperately) . The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles(The lock and key set and handles shall be paid seperately). Note:- The sawn timber ie teak planks of thickness 25mm and 15mm required for the work shall be provided by the department. However tools, equipments, mechinaries required for the work shall be arranged by the contractor

Labour charges for makingmaking Office cubicles (Size: 5.40x1.35x1.30 mtr) by using seasoned teak wood planks of thickness 25 mm and 15mm(as per architectural drawing enclosed).The planks shall be edge jointed with appropriate joints,adhesives, fasteners to form continous panels.The jointing shall be carried out in such a manner that the finished surface is perfectly aligned,smooth and without any noticeable gaps or undulation. The surface shall be made by smooth by plaining by means of plaining machine.The wall panel shall be 15mm thick whereas the side panels and divider panel shall be 25 mm thick. The tabletop shall be 25mm thick.The divider panel provided on the table top and the side panel shall consists of 8 mm thick transparent check-frosted glass(The 8 mm thick transparent check-frosted glass shall be paid seperately)..The table shall include provisions for shelves to accommodate 2 UPS, 2 CPU, and two keyboard trays which shall be fitted with best quality telescopic channels(The telescopic channels shall be paid seperately).The cubicle shall include 2 sets of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges. (The auto close hinges shall be paid seperately).The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.(The lock and key set ,handles shall be paid seperately).Note:- The sawn timber ie teak planks of thickness 25mm and 15mm required for the work shall be provided by the department. However tools, equipments, mechinaries required for the work shall be arranged by the contractor

Labour charges for making making Office cubicles (Size: 1.50x0.90x0.75 mtr) by using seasoned teak wood planks of thickness 25 mm and 15mm(as per architectural drawing enclosed).The planks shall be edge jointed with appropriate joints,adhesives, fasteners to form continous panels.The jointing shall be carried out in such a manner that the finished surface is perfectly aligned,smooth and without any noticeable gaps or undulation. The surface shall be made by smooth by plaining by means of plaining machine.The wall panel shall be 15mm thick whereas the side panels shall be 25 mm thick. The tabletop shall be 25mm thick..The table shall include provisions for shelves to accommodate 1 UPS, 1 CPU, and 1 keyboard trays which shall be fitted with best quality telescopic channels(The telescopic channels shall be paid seperately).The cubicle shall include 1 set of drawer fitted with best quality telescopic channels. Below the drawer, a file storage compartment with an openable shutter shall be provided and equipped with best quality auto-close hinges.(The auto close hinges shall be paid seperately) The drawer/shutter shall be fitted with a good quality lock and key set, along with good-quality handles.(The lock and key set and handles shall be paid seperately) Note:- The sawn timber ie teak planks of thickness 25mm and 15mm required for the work shall be provided by the department. However tools, equipments, mechinaries required for the work shall be arranged by the contractor

Labour charges for making making top panel in between 2 cubicles and columns by using seasoned teak wood planks of thickness 15mm. The planks shall be edge jointed with appropriate joints,adhesives, fasteners to form continous panels.The jointing shall be carried out in such a manner that the finished surface is perfectly aligned,smooth and without any noticeable gaps or undulation.The vertical gap shall accomodate electrical wiring,cables and other service conduits.Top planks between columns (Size: 3.60x1.35x1.30 mtr) Note:- The sawn timber ie teak planks of thickness 25mm and 15mm required for the work shall be provided by the department. However tools, equipments, mechineries required for the work shall be arranged by the contractor

Labour charges for making making wall mounted file storage(2.2 m x2.4m) . with internal sheleves,side panelsand shutters as per approved design units of size(as per architectural drawing enclosed) The outer frame shall be made from 25 mm thick teak wood planks while the shutter and internal shelves and partitions shall be made from 15mm thick teak wood planks. The planks shall be edge jointed with appropriate joints,adhesives, fasteners to form continous panels.The jointing shall be carried out in such a manner that the finished surface is perfectly aligned,smooth and without any noticeable gaps or undulation. Note:- The sawn timber ie teak planks of thickness 25mm and 15mm required for the work shall be provided by the department. However tools, equipments, mechinaries required for the work shall be arranged by the contractor

Labour charges for fixng pull type handle of approved design,sizeand finish (Stainless steel/chrome plated/brass) suitable for both drawers and cupboard shutters.The handle shall be fixed with suitable screws,properly aligned and positioned for easy grip and function.

Labour charges for making fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge.

Labour charges for making fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

Labour charges for Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Labour charges for making fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Labour charges for fixing 8mm thick glass in the frames of side panels and divider panels of cubicles as per architetural drawing etc all complete.

LIPIKA CONSTRUCTION (BID ID -56717)

ARJUN MANDAL (BID ID -56582)