ADDN ALTN TO BUILDING No P-142 AT AFS THANJAVUR

Amount

M&L Brickwork with subclass B’ bricks, straight or curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and directed.

M&L half Brickwork with subclass B’ bricks, straight or curved on plan exc 6m mean radius built in in C M 1:4 complete all as specified and directed.

M&L RCC (Nominal Mix) Type B1 (1:1.5:3) (20mm graded aggregate) as in Roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Formwork to sides of and soffits of floor & roof and sides of roof beams beam haunchings, lintels, cantilevers etc., section rough finish surface of concrete flat complete all as specified and as directed.

S&F MS TMT bars 10mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

S&F MS TMT bars 6 to 8 mm dia as in stirrups cut to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and directed.

M&L 10 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of chalk white primer including leveling the surface where undulation found with cement putty etc complete all as specified and directed.

M&L preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3 mm average thick wall care putty and applying two coats of oil bound distemper over one coat chalk white primer including filling of cracks, holes and including leveling the surface where undulation found with wall care putty etc. complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified and directed.

Demolition floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.

Description all as per item No 18 here-in-before but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed.

M&L glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7mm thick set and jointed in neat cement slurry and pointed complete all as specified and directed.

M&L 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

S&F anodized powder coated aluminium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skelton door/ window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and as directed. Note : (i) Glass panes / wire mesh will be measured & paid separately as supply only. (ii) Weight of aluminium sections only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as handles, butt hinges, tower bolts and fixing only of panel inserts of glass/ particle board/ gauge, etc. (iii) Weight of aluminium handles, butt hinges & tower bolts shall not be accounted for payment purpose.

S&F anodised aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubberised beading / oil putty in rectangular n.exc 0.5 Sqm each pane complete all as specified and as directed.

Supply only of 4mm thick Figured glass, pin head type and glazing fixing with louvers in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply only 6 mm thick Figured glass pin headed type and glazing with rubber beading/ oil putty in square/ rectangular n.exc 0.5 Sqm in each pane complete all as specified and as directed .

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and directed.

M&L prelaminated particle board (12 mm thick), interior grade, prelaminated both sides with decorative choice laminations fixed with screws to frame work complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and double tongue, anodised with hard drawnspring of 140 mm size fixed in floor complete all as specified and as directed.

S&F mortice lock brass (2 levers), vertical type, of size 75 mm complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal throughout the frame and the profile metre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, panelling of 5mm thick PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with PVC sheet beading and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

S&F aluminium anodised 150mm long barrel tower bolts of extruded section complete all as specified and directed.

S&F of mild steel butt hinges medium weight cold rolled and fixed in position of 100mm long complete all as specified and as directed.

S&F of aluminium handle 100mm cast type anodised complete all as specified and as directed.

S&F 19/20mm dia brass chromium plated pipe for curtain rod all as specified and directed.

S&F brass chromium plated brackets for Srl item No.37 complete all as specified and as directed

S&F in repair 19/20 mm dia brass chromium plated pipe for curtain rod all as specified and directed.

S&F in repair brass chromium plated brackets for srl item No 39 complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exc 1.5 Sqm each complete all as specified and as directed.

M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) in cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white / coloured cement to match coloured tiles including grinding and mirror polishing complete. Note : Colour of granite shall be as approved by GE.

M&L for 19 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work as in cubboard, kitchen cabinets (with anti termite proof) complete all as specified and as directed.

M&L for 0.9 mm thick decorative laminate type 1, surface finish, colour and pattern as approved, fixed with approved adhesive as per manufaturer's instructions complete all as specified and as directed.

S&F auto hinges stainless steel suitable for kitchen cabinets,CB, Shelves etc complete all as specified and as directed.

S&F extruded brass cast type handle fabricated type polished bright anodized 75 mm long complete all as specified as directed.

S & F anodized aluminum snap grid frame work for false ceiling incl hangers 6 mm dia, GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

M&L 4 mm thick non asbestos fiber cement building design board of size 605 x 605 mm fixed or laid to aluminum grid work with screws in ceiling flat and including preparation of surface with two coat of oil bound distemper complete all as specified and as directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking up or down 15mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S& F 15mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S& F 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S& F 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

Dismantling of 110mm dia cast iron / PVC pipes incl bends / branch pieces jointed in cement mortar and taking out if reqd complete all as specified and as directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

Dismantling of 75mm dia cast iron/PVC pipes incl bends / branch pieces jointed in cement mortar and taking out if reqd complete all as specified and as directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) grade bends of any radius with access door complete all as specified and as directed.

S&F bib taps 15 mm bore dia cast copper alloy with chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib taps 15 mm bore dia cast copper alloy with chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valves 15 mm bore dia concealed cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle and fixed, complete all as specified and as directed.

S&F in repair stop valves 15 mm bore dia concealed cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle and fixed, complete all as specified and as directed.

S&F for brass chromium plated shower rose with or without swivel joints, size 125 mm including fixing to steel pipe with shower arm of 195 mm long and 15 mm in size complete all as specified and as directed.

S&F Angle cock (15 mm bore dia) chromimum plated complete all as specified and as directed.

S&F in repair Angle cock (15 mm bore dia) chromimum plated complete all as specified and as directed.

S&F in repair two way bib cock (15 mm bore dia) chromium plated complete all as specified and as directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges etc. complete all as specified and as directed.

S&F glass shelf assembly completed all as specified and as directed.

S&F nahani trap grating doom 100 mm dia of mild steel with chromium plated minimum weight 25 gm) with or without hole for catching waste pipe collar complete all as specified and as direted.

S&F Vitreous china wash down water closet Pedestal pattern , white in colour including fixing bolts, connection to drain and to flushing pipe, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet Pedestal pattern , white in colour including fixing bolts, connection to drain and to flushing pipe, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and as directed.

S&F 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet valve float and handle, bracket complete all as specified and as directed.

S&F in repairs 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet valve float and handle, bracket complete all as specified and as directed.

S&F wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock , CI bracket 15mm dia polythene connection 450 mm long, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed.

S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock , CI bracket 15mm dia polythene connection , 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc complete all as specified and as directed.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed.

M&L in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.

Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out from hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

M&L Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 150mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

M&L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150mm bore complete all as specified and as directed.

M&L Plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping/benching including necessary form work complete all as specified and as directed.

M&L Precast reinforced cement concrete 1:2:4 type B1using 20mm graded stone aggregate as in cover slab set in cement mortar 1:4 complete all as specified and as directed. NOTE: Reinforcement shall be measured and paid separately.

M&L for rendering 15 mm thick in cement mortar (1:4) mixed with water profing compound (WPC) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound will be measured and paid seperately.

Supply only Integral waterproofing compound complete all as directed.

Supply, Laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 70 sqmm 3.5 core with all fixing & connecting accessories including taking down old unserviceable complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, VTPN with 200 amps rated bus bar, IP-43 protection suitable for fixing MCCB's/MCB"S/lsolators complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB'S / lsolators after and including taking down old DB with MCB complete all as specified and as directed.

S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed of Make : Legrand Cat No 408609 to 408617 or equivalent & approved model of SIEMENS.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed of Make : Legrand Cat No 408587 to 408595 or equivalent & approved model of SIEMENS.

S&F MCCB 3 Pole 415 Volts adjustable type 160 Amps with breaking capacity 36 KA complete all as specified and directed.

M & L Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including one run single core 6 Sqmm copper green colour earth wire all as specified and directed (02 run 6 Sq mm single core cable, one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM).

Taking drawn carefully old aluminium/copper point wiring for one light, socket or power etc incl all fitings such as switches sockets, holders, light fittings, fan requlators, distribution boards etc and making good the disturbed surface of wall ceiling complete.

M&L point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS) in including PVC rigid non metallic 25 mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cupwasher including size 1.5 sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and directed.

Description all as per item No 106 mentioned here-in-before but for one ceiling fan / Exhaust fan point, controlled by one way switches 5/6 Amps complete all as specified and as directed.

Description all as per item No 106 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the independent board complete all as specified and as directed.

All as per item No 106 here-in-before but for point wiring with 4 Sq mm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15/16 amps on the independent board complete all as specified and as directed.

M&L switch modular 1 way 6 amps 1 module complete all as specified and as directed.

M&L modular white cover with frame 3 module complete all as specified and as directed.

M&L modular white cover with frame 6 module complete all as specified and as directed.

M&L modular metal flush box 3 module complete all as specified and as directed.

M&L modular metal flush box 6 module complete all as specified and as directed.

S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, white/ivory finish, flush non shutter non inter locking type complete all as specified and as directed.

Supply & Fixing Modular fan Regulator electronic step type 120watt , 2 Module complete all as specified and as directed.

Supply and fixing OCTANE LED 2X2 PANEL 36 Watt LED ceiling light fitting suitable for arm strong /grid ceiling with electronic driver complete with all accessories internally pre-wired and including connecting up with twin core copper conductor cable with suitable size complete all as specified and as directed.. Make:-Havells Cat Part No. LHEBAEP5PV1W036 or equivalent in CG/Philips.

Supply and fixing of E LITE LED PRIDE PLUS NEO wall mounted LED light 10 Watt LED, 6500K with decorative ultra slim square profile LED lighting fixture with extruded polycorbonate environmental friendly energy efficiant complete all as specified and directed.Make as per Havells Cat Part.No: LHEXACP7IN1W010 or Equivalent in Philips & CG.

Supply, installation, commisioning of water cooler with RO fully sainless steel, electric driven single phase having approx 40/40 in Ltrs storage and nominal cooling capacity complete all as specified and directed.

Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4.0mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron or steel all as shown in electrical Plate No-3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

M&L for sub main wiring with 2 run of 4 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 2.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs complete all as specified and as directed. Note : 2 runs of 4sqmm power cable and one run of 4.0 sqmm each cable and PVC conduit will be measured as one RM.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 amps capacity complete all as specified and as directed.

Supply and fix exhaust fan steel body AC single phase 230 volt of size 300mm sweep with blades and frame and louvers complete all as specified and as directed.

K.N.RAJENDRAN (BID ID -3307404)

SEMBA ELECTRICALS (BID ID -3301093)

NITHYASRI AND CO (BID ID -3302040)

NLK Construction (BID ID -3306954)

BKR Enterprises (BID ID -3307274)