138WE/L-23/2026-27

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe, cable etc. and getting out in soft/loose soil, complete all as specified and/or as directed by Engr-in-Charge.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick, complete all as specified and/or as directed by Engr-in-Charge.

Removing surplus soil to a distance not exc. 50M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and/or as directed by Engr-in-Charge.

Material and labour for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. complete all as specified and/or as directed by Engr-in-Charge. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, precast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 50mm, complete all as specified and/or as directed by Engr-in-Charge.

Dismantling steel tubular pole, complete all as specified and/or as directed by Engr-in-Charge.

M&L for steel tubular swaged poles type 410 SP-31 (9mtr long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws including two coats of aluminium paint over one coat of red oxide zinc chrome primer including portion above coping shall be painted in alternative bands of black and yellow colour starting with yellow colour (each band of 20 cm wide) by two coats of super enamelled paint upto 1.5m height, complete in all respect conforming to IS-2713, complete all as specified and/or as directed by Engr-in-Charge. Note : Excavation and earthwork, cement concrete etc. will be measured and paid separately under relevant items of this schedule)

M&L in replacement of stay assembly complete with stay plate bow, stay rod of dia 20 mm and galvanised iron stay wire stranded of size 7/4mm and accessories as shown in electrical plate No 1 of SSR part-I (loop type insulator, stay clamps, excavation and concrete shall be measured separately), complete all as specified and/or as directed by Engr-in-Charge.

Dismantling of ACSR or AAC conductors, complete all as specified and/or as directed by Engr-in-Charge.

M&L for supply and installation, overhead, aluminium conductor, steel reinforced, weasel, including making connections and fixing on poles with all necessary arrangements, complete all as specified and/or as directed by Engr-in-Charge. Note: Weight of ACSR or all aluminium conductors drawn for overhead lines is to be determined by measuring taut horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra added for sag, jointing, jumpers, etc.