SPECIAL REPAIRS TO TOILETS AT FCM (PH-II ) AND PROVISION OF LIGHTINING FACILITY IN PARKING SHEDS FOR FLYING FACULTY AT SEKHON BLOCK AFA HYDERABAD

Amount

Taking up or down 25mm or 32 mm bore of pipe PVC/PP-R/steel tubing and connections, including cleaning for refixing or removal to store etc complete all as directed.

Taking up or down 20mm bore of pipe PVC/PP-R/steel tubing and connections, including cleaning for refixing or removal to store etc complete all as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as directed.

S&F of 32 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing debris to a distance exc 1.5 km and n.exc 3 km complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, laid dry and removing debris to a distance exc 1.5 km and n.exc 3 km complete all as specified and directed.

Demoltion of plain cememnt concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to a distance exc 1.5 km and n.exc 3 km complete all as specified and directed.

Demoltion of Reinforced cememnt concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to a distance exc 1.5 km and n.exc 3 km complete all as specified and directed.

Taking down shutters including frame of any description exc 1 sqm but n.exc 2 sqm each

Taking down steel/aluminium shutter n.exc 1 Sqm each including taking out frame complete all as specified and as directed.

Taking up or down PVC vent cowls of 75mm/ 110 mm dia complete.

M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.18 sqm but n.exc 0.38 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment laid over and including 15 mm thick screed bed in CM 1:6 all as specified and directed by Eng-In-Charge

M & L for Glazed ceramic coloured tiles in vertical surfaces 600x300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed.

M&L machine cut granite stone slab 20mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms,WHB platform and like laid over and including 15mm thick backing coat in CM 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified.

Labour for Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and as directed.

Labour for Cutting holes, square or circular of area exc. 0.20 and n exc 0.3 Sqm on granite slab for fixing of wash basin complete all as directed.

M&L for Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note: Reinforcement shall be measured seperately

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

S&F for Factory made solid PVC Moulded door shutter with particle board core , 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified and directed by Eng-in-charge.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F powder coated aluminium window and ventilator shutters side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified.

S&F 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified.

S&F 100mm Aluminum anodised barrel tower bolts of extruded section complete all as specified.

S&F 100mm extruded aluminium anodised alloy handles fabricated type complete all as specified.

S&F in repair 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified.

Supply and fix in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make :- Hindware Cat No. 10049 or equivalent.

S&F in repair 32/40mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern ) with plastic water closet seat including fixing of flush pipe to pedestal pan including all joints complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets. Make hindware/ Parry ware or equivalent

S&F in repair vitreous China Urinal, half stall type, with and including waste coupling CP of 40 mm and all fixing acessories complete.Make: CERA, HINDWARE or Equivalent.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as directed by Eng-In-Charge

S&F in repair vitreous China Urinal partition, with and including all fixing acessories complete. Make: CERA, HINDWARE or Equivalent.

S&F in repair 15mm pillar taps fancy type cast copper alloy, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repair Brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge Make Jaguar Model No FLR-CHR-5219N or Equivalent

S & F in repairs Two way Bib tap 15 mm size, brass chromium plated rust proof complete Make Parryware Model No - G4067A1 or Equivalent

S/F in repairs Angle valve cast copper alloy fancy type chromium plated screwed down high pressure screwed both ends for Iron pipe or for unions and fixed for 15mm dia CPVC pipe etc complete all as specified.

Supply and fix in repairs 15 MM dia Angular stop valve concealed type, Brass chromium plated Make :- Parryware Model No G5053A1 or equivalent

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. complete all as specified and as directed.

S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Chromium plated towel ring round with round flange.Make Parryware Model No T6502A1 or equivalent complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed

S & F in repair UPVC (SWR) pipes type 'B' of 110mm dia single socketed in any length fixed to walls / floor complete all as specified and as directed

S & F in repair UPVC (SWR) pipes type ' B' of 75 mm dia single socketed in any length fixed to walls / floor complete all as specified and as directed

S & F in repair UPVC (SWR) pipes type ' B' of 50 mm dia single socketed in any length fixed to walls / floor as in sunken spouts complete all as specified and as directed

S & F in repair UPVC (SWR) bend of 75 mm dia complete all as specified and as directed.

S&F in repair 110mm bore UPVC SWR bend of 110 mm dia complete all as specified and as directed.

S&F in repair 110mm bore UPVC SWR bend with acces door complete all as specified and as directed.

S&F in repair 110mm bore UPVC SWR branch piece single 'Y' equal or unequal complete all as specified and as directed.

S&F in repair 75mm bore UPVC SWR branch piece single 'Y' equal or unequal complete all as specified and as directed.

S&F in repair 110mm bore UPVC SWR junction single (single T) equal or unequal complete all as specified and as directed.

S&F in repair 110 mm bore UPVC SWR junction single tee with acces door complete all as specified and directed

S&F in repair PVC (SWR) 75 mm dia Vent cowl complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm diaVent cowl complete all as specified and as directed.

S&F in repair Chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete. Make Parryware model No 19941A1 or equivalent

S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

M& L for Pre-cast cement concrete block masonry type C1 (1:3:6) using 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

M & L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound all as specified. Note - Liquid water proofing compound measured & paid separatly.

M&L for applying two coats of oil bound emulsion over a coat of primer over 3mm thick wall care putty on new plastered surfaces including preparation complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of the existing treatment on walls and applying two coats of oil emulsion distemper over primer over 3mm thick wall care putty on old plastered surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement base paint over a coat of primer including preparation of new plastered surfaces complete all as specified and as directed.

S & F in repair 110 mm PVC (SWR) gully trap setting and jointing with solvent cement complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall nexc 150 Sqcm complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall exc 150 Sqcm and n.exc 400 sqcm complete all as specified and as directed.

S&F 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified

Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and as directed.

M&L for MS framed brackets of angles or tees Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M& L for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including wateringcomplete all as specified

M&L 75 mm thickCement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer in charge

“M&L for Water proofing treatment to Sunken slabs as under complete all as specified and directed: - (i) Preparation and cleaning of the existing sunken/ lowered portion of RCC slab surface for full depth of sunken floor by wire brush. Chisel out any mortar sticking the surface. (ii) Applying FOSROC Nitoproof 600PF (minimum 0.80mm dft) over a priming coat of Nitoproof WB primer or equivalent product of Asian paints, M/s MC Bauchemie/CIPY/SIKA/ Pidilite Dr Fixit/Thermax/STP applied as per manufacturer’s instructions to bottom and full vertical sides of sunken floors. (iii) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage/ leakage is noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie/CIPY/SIKA/ Pidilite Dr Fixit/ Asian paints/Thermax/ STP admixed with Integral WPC or cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any; and this shall be done by contractor at his own cost. (iv) Apply additional coat of FOSROC Nitoproof 600PF or Equivalent of Asian paints/ M/s MC Bauchemie/CIPY/SIKA/ Pidilite Dr Fixit /Thermax/ STP. (v) All Junction points of side walls where CI/GI pipes are passing through shall be sealed with epoxy cement mortar.”

Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete all as specified and as directed.

Taking down Exhaust Fan and refixing fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed.

M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor drawn through and including rigid PVC conduit concealed of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls or in chases etc. including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thick for fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for the following :-

(a) One light point controlled by one switch

(b) One Exhaust fan point controlled by one switch

(c) One three pin socket 5 Amps point on same board

(d) One three pin socket 5 Amps independent with 1.5 sq mm coppper conductor

S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specified and as directed.

S&F Switch Piano type polycorbonate white 1 way, 6A, 240Volts complete all as specified and as directed.

S&F Switch socket combination polycorbonate white 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.

S&F socket outlet 3/5 pin , 5 Amp Flush ISI marked complete all as specified.

S&F LED light fitting 1x10 W 220 V AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1x20 W 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for Sub Main wiring with two runs of 4sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc. complete all as specified and as directed.

Note:-(i) Necessary PVC dummy plates & rigid PVC junction boxes for maint./inspection purpose as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.

(ii) Same size wire shall be used for phase, neutral & earth conductor

(iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue only for phase, black for neutral and green for earth leads.

(iv) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.

S&F of MCB DB SPN 4 way with copper bus bar & neutral link double door type to be fixed in the wall including connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed.

S&F MCB SPN 6 to 32A, 10KA rupturing capacity complete all as specified and as directed.

S&F MCB SP 6 to 32 A 10 KA rupturing capacity complete all as specified and as directed.

S&F of MCB DB SPN 8 way with copper bus bar & neutral link double door type to be fixed in the wall including connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 m depth in soft /loose soil & getting out for laying of LT cable all as specified & directed by Engr- in Charge.

M&L Returning filling in including spreading, levelling, watering & well ramming in layers n.exc 25 cm in soft /loose soil complete all as specified & directed by Engr -in - Charge .

Removing excavated soil to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified & directed by Engr - in Charge.

M & L Sand covering /cushioning for underground cable protection all as specified in SSR Part - I complete all as specified and directed by Engr- in Charge. Note: Punned thickness shall be measured

M&L for burnt bricks sub class 'B' laid perpendicular over & cushioning for cable protectioncomplete all as specified & directed at site by the Engr- in Charge.

Supply and lay LT UG cable, XLPE insulated armoured, heavy duty aluminium conductor multistranded, 1100volts grade, of 10Sqmm x 4core cross sectional area laid in trenches / fixing on walls / poles or passing through GI pipe including connecting up with suaitable lugs, nuts and bolts wherever required and testing complete all as specified.

Supply and lay LT UG cable, XLPE insulated armoured, heavy duty aluminium conductor multistranded, 1100volts grade, of 6 Sqmm x 2core cross sectional area laid in trenches / fixing on walls / poles or passing through GI pipe including connecting up with suaitable lugs, nuts and bolts wherever required and testing complete all as specified.

M/s RAMA LAKSHMI CONSTRUCTIONS

S J REDDY