Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹36.9 L+₹1.3 L (3.72%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.4 L+₹2.8 L (7.87%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹39.1 L+₹3.5 L (9.79%)Rejected-Finance KUTUMB 143 40 VINAYAK NAGAR INDALPUR ROAD NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | UTTAR PRADESH | 211008 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹39.5 L+₹4.0 L (11.2%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
Periodical services and joinery work in the area Zone C at old Cantt Allahabad
2022_MES_530362_2
8565/E8
Open Tender
Civil Works
Item Rate
270 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹90,000
Yes
7 Jan 2023
3 Oct 2022
3 Nov 2022
3 Oct 2022
1 Nov 2022
18 Oct 2022
3 Oct 2022 - 10 Oct 2022
Amount
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brick work with flyash Bricks , straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 but each and removing from site, complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each and removing from site. complete all as specified and directed.
Taking down shutter of any description, not exceeding 1.00 Sqm each, complete all as specified and directed.
Taking down shutter of any description, exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, complete all as specified and directed.
Resecuring or easing and adjuisting without taking down shutter of any description exceeding 1 sq.m but not exceeding 2sq.m each, complete all as specified and directed..
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.
Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.
Sheet glass, 5.5 mm thick, in square not exceeding 0.5 sq. m in each pane including rubber bead joining cleat for fixing in position for aluminium window/ ventilator including taking down existing glass with beading and and other fittings, complete all as specified and directed.
Powder coated Aluminium (minimum thickness of powder coating 50 micron of approved colour) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, including concealed type lock for all three shutters, complete all as specified and directed.
Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 Nos hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or supporting stand for desert coolers etc., and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specifed and direcetd.
Stainless steel handles, cast type, anodised, 150mm long, complete all as specified and directed.
Stainless steel handles, cast type, anodised, 150mm long, fixed in repair, complete all as specified and directed.
Stainless steel, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.
Stainless steel, barrel tower bolts of extruded section and fixed, 200mm long, fixed in repair, complete all as specified and directed.
Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 250mm long, complete all as specified and directed.
Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 250mm long, fixed in repair, complete all as specified and directed.
Butt hinges, medium weight, stainless steel, and fixed, 100mm size, complete all as specified and directed.
Butt hinges, medium weight, cold rolled mild steel, and fixed, 100mm size, fixed in repair, complete all as specified and directed.
Floor door stopper of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor, over all length of cover plate shall be 140mm, in repair complete all as speicirfed and directed.
Door closer hydraulically regulated, Aluminium die cast, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, fixed in repair, complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified and directed.
Pressed steel frames, 125 x 60 mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
Pressed steel frames, 125 x 60 mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in bed block, complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.
Mild steel ordinary door springs 250mm long including welding, screwing, any type and fixing arrangement, in repair complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7mm / 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as speciifed and direcetd.
Non asbestos fibre cement building boards, 4mm thick, fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as speciifed and directed.
Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed..
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, valley gutter, ridge hips etc, fixed with self tapping screws, complete all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
MDF board, 18 mm thick, interior grade, prelaminated one side with decorative choice lamination, including wooden/ pvc beading, fixed in repair, complete all as specified and directed.
Rubber door seal, 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screws with washers, fixed in repairs, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash, complete all as specified and directed.
Preparation of old decorated plastered surfaces of ceilings including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of acrylic emulsion paint of approved colour, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of plastic emulsion paint over a coat of primer on walls surface, complete all as specified and directed.
Preparation of wall surface and application of texture paint in following stages: (i) Sanding the surface to make it smooth and applying 2 mm thick acrylic wall putty and allow it to dry for 4-6 hrs. (ii) After the putty surface has dried, again sanding the surface and apply one coat of deco solvent based primer over the surface. (iii) Again sanding the surface and apply first coat of Royale base coat and second coat of Royale Luxury Emulsion with proper dillution of water as per procedure recommneded by Engr-in-charge. (iv) After the drying time of 3-4 hrs, apply top coat of Co-polymer based interior special effects emulsion which will not rag or sag on vertical surface with abrasion resistance, odourless and non-toxic properties to provide different types of special effects such as crinkles, dapple weaving, canvas, spatula, colourwash, ragging, sponging, combing, brushing etc., with different tools, complete all as apecified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint of approved colour, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of cement base paint over a coat of alkali resistant primer on walls surface, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of exterior weather proof paint of approved colour, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of exterior weather proof paint over a coat of primer on walls surface, complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of white colour / approved colour, complete all as specified and directed.
French polishing (one coat) on new wood surfaces of any description, width or girth including cleaning and preparing the surface, complete all as specified and directed.
Preparation of old wooden surfaces of any description and girth and treated with creosote oil, complete all as specified and directed.
Re-writing of letters or figures (Block, Roman, Italic or Indian) with fluorescent paint height of letter exceeding 75mm but not exceeding 300mm & width of letter exceeding 10mm but not exceeding 20mm wide, complete all as specified & directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and fair, complete all as specified and directed.
Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.
Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound, complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer over 1mm thick wall care putty finish, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of alkali resistant primer, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of weather proof paint of approved colour over a coat of primer, complete all as specifed and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame (with and including punching or drilling out old glazing pins/spring clips and providing and fixing new ones) or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
Sheet glass, 4mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Figured glass, 4mm thick, pin headed type and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Removal of vegetation of girth n exc 50 cm and of any height, including removal of its roots and branch and making good the disturbed surface in CM 1:4, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.
Sand stone slab, 50mm thick, as in chajja/ cover slab of manhole cover, set and jointed over supports in CM 1:4, complete all as specified and directed.
Plain Cement concrete 1:2:4, type B-0 (12.5 mm crushed stone aggregate) as in coping, coving, roof padding, using water proofing compound, including finishing the surface even and smooth, complete all as specified and directed. NOTE:- Water proofing compound shall be paid separately under respective item of this Schedule.
Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) asin ladder, cooler stand, chowkhat, complete all as speciifed and directed.
Providing damp-proof layer in 2 coats of acrylic polymer coating consisting of 1 part acrylic polymer mixed with 2 parts of cementitious powder applied at the rate of 1.4 sqm/kg of mix per coat, complete all as speciifed and directed. Note: (a) Second coat to be applied after 4-6 hours of first coat. (b) 5 days curing to be carried out to the surface before plastering. Make: 'Smart Care damp block 2K' of Asian Paints or equivalent of Dr Fixit, STP, CICA
Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid and bedded pointed in cement mortar, complete all as specified and directed.
Demolition of mud/lime concrete in roofs, any thickness, including plastering, old water proofing membrane and and leeping including brick/brick tiles (whether full thickness removed or only a part thereof) and removing the rubbish from site for distance exc 250m but n exc 500m, complete all as specified & directed.
Plain Cement concrete 1:2:4, type B-0 (12.5 mm crushed stone aggregate) as in roof padding, complete all as specified and directed.
Screed bed 10mm thick in CM 1:4, mixed with water proofing compound, over roof slab, finishing the surface even and fair, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.
Providing water proofing treatment over cleaned roof surface with bitumenous membrane weight not less than 3 kg per sq.m comprising of the following and testing of following: (a) Cleaning the surface and make it free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion and contraction then repairing of undulated surface with cementitious polymeric modified mortar (prof MPP : Cement : Sand 1:2:5) as per manufacturer instruction. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (c) Providing APP modified polymeric water proofing membrane having weight not less than 3 kg per sq.m with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length.
Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished built with grey cement and no pigment over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), white colour, 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, including provision of GI nipple for tank, fixed in repairs, complete all as specified and directed.
Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repairs, complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
Stack clamps out of 50 mm by 5 mm flat iron for fixing of 110mm pipe to wall, including all fixing arrangement, complete all as specified and directed.
Ball brass valves, 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.
M/s Rahul Kumar Agrawal
KRISHNA BAHADUR
creative construction co.
Vibha Enterprises
Shivam Constructions
AMARDEEP ENTERPRISES
M/S ATUL CONSTRUCTION
A R ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .