Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹38.3 L+₹1.3 L (3.41%)Rejected-Finance 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹39.1 L+₹2.1 L (5.67%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹39.4 L+₹2.4 L (6.51%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹40.7 L+₹3.7 L (10.1%)Rejected-Finance 2645 SAYAROLI BAZAR NASIRABAD RAJ 305601 | NASIRABAD | AJMER | RAJASTHAN | 305601 | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹99,000
Closing Date
25 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
Garrison Engineer, Military Engineer Services, Nasirabad, Pin 305601
PROVN OF DRAIN SYS NEAR BLDG NO. EM 69 AT 501 AD GP SP, GD ROOM AT MAIN GATE OF 213 RKT REGT, TOILET NEAR SASF GUARDPOST AND NEAR STN HQ NSD AND SPL RPR TO SEWAGE LINE NEAR BLDG NO. 107 AT MALL ROAD AND ROOF TREATM OF BLDG NO. P 45, 48, 51 AND 52 AT
2024_MES_635827_1
8398/E8
Open Tender
Civil Works
Item Rate
183 days
GE Nasirabad
MES Contractor enlisted as Class D and above and category a i having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
6 documents required · 6 mandatory
₹500
Yes
₹99,000
13 Feb 2024
4 Jan 2024
27 Jan 2024
4 Jan 2024
25 Jan 2024
18 Jan 2024
Amount
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge
M & L for mild steel TMT bars of 6mm to 8mm dia and over, in stirrups , spacers and boinders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge
M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge
M & L for M-25 grade (design mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for RCC M-25 (design mix) using 20mm graded aggregates as in roof beams, lintel beams/bands, cantilevers, bressummers, lintels over 1.5m span, chajjas etc complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to sides and soffits of floor or roof beams, soffits of lintel beams/ bands, chajjas, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., flat surfaces of concrete ,surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for RCC M-25 (design mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately) complete all as specified and directed.
M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement based primer complete all as spd and as directed.
M & L for broken stone boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as spd and as directed.
Supply only integral water proofing compound all as specified and directed. Make : Fosroc Conplast/Sika
M & L for Non-skid Ceramic coloured tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), over 25 mm thick PCC type 1:2:4 type B-0 using 12.5mm graded stone/aggregates as in base concrete to floor finish, complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick, area of tile exc 0.11 sqm but n.exc 0.18 sqm, on vertical surfaces of wall such as skirting/ dados etc set and jonted in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonry walls in CM 1:4 complete all as specified and directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge
M&L for brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash oldsize bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with fly ash oldsize bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:1).
Supply and fixing Squatting pattern Water closet, Orissa pattern of vitreous china Size 580x440mm with integral foot rest with long body PVC SWR suitable P or S trap complete all as specified and directed.
S&F vitreous china wash hand basin white flat, back of size 550mm x 400mm including 32mm waste coupling and PVC waste down pipe and bracket complete all as specified and directed.
S&F vitreous china urinal half stall type incl connecting pipe, spreader, flushing valve and flush/waste pipe fixed to wall complete. Make : Parryware C0580 with C8123 or Jaguar URS WHT 132530
S&F PVC valve less syphonic action type, low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float and handle & flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S & F 15mm bore, 450mm long PVC connections heavy duty with two nos PTMT nuts complete all as specified and as directed by the Engineer-in-Charge
S & F chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.
S&F stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.
S&F Chromium plated 15mm bore bib taps with capstan heads, screwed down for iron pipe or for brass ferrule & fixed complete all as specified & directed.
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
S&F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed.
S&F 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed.
Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
S&F PVC(SWR) Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as spd and directed.
S&F grating square 125mm size PTMT with centre hole movable or side hole for fix to waste pipe (min weight -100 gms) complete all as spd and directed.
S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
Supply and fixing of 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S & F anodised Aluminium sliding window door shutters, aluminium powder coated section with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts, hinges, anodised aluminium snap beading screws, aluminium alloy sheet foundation box for each shutter etc and including fitted with 5mm thick tinned glass in glazed shutter complete, all as directed.
S & F anodised aluminium door shutters, aluminium powder coated section with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mm x 02 Nos in each door, hinges, anodised aluminium snap beading screws, hydraulically regulated double action floor door spring made up of 1.25mm thick aluminium alloy sheet foundation box for each shutter etc and including fitted with 5mm thick tinned glass in glazed shutter with brass mortice lock 10mm 2 levers , vertical type complete, all as directed.
S & F Steel window/ventilator factory made, made out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1, and plaster with finishes to match the existing surfaces, including 02 coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.
S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed.
S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed type B-21, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) complete all as specified.
S&F 3mm thick plain/figured glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.
Disconnecting existing water tanks, setting asides ( or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and re-fixing reconnecting in same position, of capacity exc 250 ltrs but n.exc 500 ltrs each etc complete all as specified and directed.
Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge
S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge
S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified
S & F 110mm bore PVC (SWR) bends / shoe of any radius with oval access door, complete all as specified
S & F 110mm bore PVC (SWR) vent cowl, complete all as specified
S & F 75mm bore PVC (SWR) bends/shoe of any radius with oval access door, complete all as specified
M & L for Steel work in roof trusses (framed) trussed purlins, rails and fastening, (Beam, tee, angle, channel or flat sections). including distance pieces, cleats etc.complete using ERW or induction butt welded conforming to Fe 410-W Gde E-250 quality 'A', Complete all as specified and directed.
Supply and fixing MS angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in posts to fencing etc fixed in position conforming to Fe-410 (Gde E-250) (quality-A), complete all as specified and directed.
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ Lor J type hook complete all as specified & directed.
Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of Ceiling & applying three coat of white wash complete all as specified and directed
M & L for preparation of newly plastered surfaces of walls & applying three coat of white wash complete all as specified and directed
M & L for distempering with 1st quality acrylic distemper having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete as per manufacturers specifications. two or more coats on new work over providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.
M & L for 40 mm thick sand stone slab set and jointed in CM 1:4 as in base of water tank and M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm crushed stone aggregate) finished concrete surface even and smooth complete all as specified and directed
M&L for machine cut Kota stone in single piece 20-25mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as directed by Engr-in- charge, including rubbing and polishing complete all as specified.
M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm wide white marble strip in border as directed by Engr-in- charge, including rubbing and polishing complete all as specified.
M & L for kota stone slab 20-25mm thick in riser, skirting, and pillar laid over & incl cement screed base 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing complete all as specified and as directed by the Engineer-in-Charge
M & L for 20 mm thick black granite on plateform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite slab including cutting and polishing complete all as specified and directed
Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 02 KMs complete all as specified and directed.
For Non-Acessable Roof:- M&L for provn of water proofing roof treatment to RCC roof with APP modifed plain membrane, thickness of membrane not less than 3 mm and weighing not less than 3.6 kg/sqm comprising with following:- (a)The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes. chimneystacks, etc. and other similar situation to ease up about corners.incl 10mm thick screed bed in CM 1:4 mix with and including water proofing compound under Bitumious based Primer conforming to IS: 3384 @ 0.3 Kg/SM to be applied on prepared surface, till the surface is properly impregnated. (c) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer's instruction. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and Ceiling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.
Note : as per above 74.00 continue :- (d) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (e)A fillet of PCC (1:2:4) type B-0 of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded. Apply two coats of bituminous aluminium paint over APP membrane @ 0.30 Kg/Sqm complete all as per manufacturers instructions. complete all as per manufacturers instructions, after as specified and directed.
M&L cement concrete 1:2:4 (using 20mm graded aggregate) as in surface channel and drain complete all as specified and directed.
Extra for forming fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cill , steps, parapets and railing upto 60cm in height , coping, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
M&L cement concrete Type C1 1:3:6 (20 mm graded aggregate)in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates etc as specified and directed.
M&L for40mm thick PCC (1:2:4) type B-0, using 12.5mm garded aggregates mixed with water proofing compound as in levelling course over RCC, 40mm in DPC complete all as spd and directed.
Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed.
M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering in cement mortar (1:6), 15mm thick on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering in cement mortar (1:6), 10mm thick on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering in cement mortar (1:4), 10mm thick on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10 mm thick in cement plaster 1:4 as in ceiling surfaces finished even and smooth (without using exta cement) complete all as specified & directed.
Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc.and getting out in any type of soil, complete all as specified & directed.
Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc.and getting out in hard/dense soil, complete all as specified & directed.
Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc.and getting out in soft/ disintegrated rock, complete all as specified & directed.
Returning, fillings in including spreading, levelling, watering and well ramming in layers, n.exc 25cm thick in soil complete all as specified and directed.
M&L Sand/Moorum filling under floors or in foundation including watering, consolidating, well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing of excavated soils, not exc 50mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed.
Removing of excavated soils, exc 50mtr but not exceeding 250 mtrs and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed.
Removing of excavated material/ rock , not exc 50mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed.
M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified & directed.
Demolition/Dismantling and breaking up of existing sewage pipe line 150mm dia internal bore drain pipes (salt glazed stone ware, AC or reinforced concrete) set in Cement Mortar and disposed out complete all as specified and directed.
Cutting into existing manholes for removing existing 150mm bore branch drain, making good to walling and rendering cutting out branch channel and making good benching in PCC (1:2:4) type B1 using 20mm graded stone aggregate and smooth finish with (1:3) complete all as specified and directed.
S&F 150mm bore reinforced concrete pipe class NP2 with one coller per length of pipe, laid in trenches, jointed complete all as specified.
M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.
M & L for soakage wells including excavation in any type of soil, foundation in PCC (1:4:8), walls of honey combed fly ash brick masonry with top ring of RCC 1:1.5:3 type A-1 concrete including intercepting chamber and screen chamber made of fly ash brick masonry in CM (1:6), RCC cover slab in1:1.5:3 type A-1 & SFRC MH cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia & 3.0m effective depth all as per drg No. CEBZ/TD/78/2011 sh No 1/2 & 2/2 complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
M&L 100mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in sub base complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality and vibrated with mechanical vibrator & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M & L for precast cement concrete (Type B-1), 1:2:4, 20 mm graded aggregate) in landings, cover slabs (for manholes etc.)complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box of, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick sheet with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga
All as above item no 105.00 here-in-before but One light /exhaust fan point controlled by one, one way 5 Amp SP switch.
S&F Switch piano, flush type, single pole, one way, 6/10 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge.
S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by engr-in-Charge.
S&F of lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand
S&F LED tube light fitting in acrylic linear tube (1x 18 watt), 230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.
S & F LED light fitting 1X10W bulkhead luminaires IIP 65 protection including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge Make Bajaj/Havells/CG
S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 4 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.
S & F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
S&F house service bracket hook type complete with 3Mtr long GI pipe 40mm dia medium grade two Nos 900 bracket, MS hook and stay complete all as spd and directed
S & F of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. . Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.
Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in electrical plate No. 3 of SSR Pt-I of 2009 incl dismanteling of old unsv existing earthing and connected to earthing test point all as specified or indicated including testing on completion
Supply , laying and testing 1100 volt grade heavy duty cable XLPE insulated , armoured cable with stranded aluminium conductor of size 6 Sqmm 2 core including taking down old unsv cable complete all as specified and diected
S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200 Copper winding of sweep 300mm complete all as specified & directed.
Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 mtr length fixed with two nos of clamp , nut and bolts for fixing of street light complete all as specified and directed by Engr-in-Charge.
M/S SHIVA TRADERS
V K LAKWAL CONSTRUCTION
kirtiman traders
SHREE BALAJI TRADING CORPORATION
M/s Jai Jinendra Constructions
TANISHQ ENTERPRISES
M/s AKASH CONSTRUCTION CO.
M/S AL ASMA ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .