Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Accepted |
| 2 | Accepted-Technical | Accepted-Technical Accepted |
Tender Value
₹1.4 L
EMD Value
₹2,770
Closing Date
18 Aug 2026, 2:00 pmClosed
Executive Engineer
Office of the Executive Engineer M and H Division Anantnag
Repairs to Fresia F 90 STI Snow Blower of Snow Clearance Control Room Kulgam/Bathipora
2026_PWDJK_320373_1
MHDA/TS/2026-27/43
Open Tender
Repair and Maintenance Works
Percentage
10 days
SCCR Kulgam
Refer NIT
6 documents required · 6 mandatory
₹200
Accounts Officer M and H Engg. Deptt. Kashmir
₹2,770
21 Aug 2026
10 Aug 2026
19 Aug 2026
10 Aug 2026
18 Aug 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Fresia F 90 STI Snow Blower | |||||
| 1.01 | Complete job by way of inspection, dismantling, cleaning, overhauling, servicing and testing of hydraulic control assembly. The job includes the following :
1. Inspection, fault diagnosis and testing of hydraulic control assembly
2. Dismantling, cleaning and overhauling of hydraulic valve manifold assembly
3. Supply and replacement of hydraulic valve seal / O-ring repair kits
4. Supply and replacement of hydraulic hose fittings, adaptors and sealing accessories
5. Servicing of pressure relief and flow-control valve components
6. Servicing of non-return / check valve section
7. Servicing and pressure checking of hydraulic accumulators
8. Hydraulic oil required for flushing, testing and topping up
9. Reassembly, calibration, hydraulic pressure testing and trial run
The job shall include all labour charges, tools, tackles, consumables, etc., to be arranged and supplied by the contracting agency. The supply of HSD for carriage and testing shall also be within the scope of the contracting agency. The old/condemned material removed during overhauling if any shall be returned to the Divisional Store by the contracting agency. (as per sample) | 1 | Job | 35,500 | ₹35,500 |
| 1.02 | Supply and replacement of Hydrostatic/ hydraulic transmission oil including draining of oil, cleaning of oil reservior/releated system, filling with fresh TUTELA CAR GI/E (ATF DEXRON III-C4) or equivalent oil, checking oil level and testing of hydrostatic/hydraulic transmissioin system, complete in all respects.
The job shall include all labour charges, tools, tackles, consumables, etc., to be arranged and supplied by the contracting agency
(Tutela car GI/E (ATF DEXRON III-C4) or equivalent ) | 70 | Ltrs | 300 | ₹21,000 |
| 1.03 | Providing & fitting of Air filter (1No.) Diesel filter set of 2 pcs, M.Oil filter set of 3 pc,hydrostatic transmission oil filter (1 No.) hydraulic oil filter (1No.) . The job shall include all labour charges, POLs, tools, tackles, consumables, etc., to be arranged and supplied by the contracting agency, complete in all respects.
1. 21702911 (air filter)
2. 22480372 ( 1 No.) 20998367 ( 1 No. ) for diesel filters
3. 23075367 (1 No.) and 23075366 (2 Nos.) for M.Oil filters
4. 00099792 for hydrostatic transmission oil filter
5. 00083031 hydraulic oil filter | 1 | Job | 30,500 | ₹30,500 |
| 1.04 | Engine oil change: The job including draining of old oil, cleaning of oil reservior/releated system, filling with fresh48 ltrs of OBL LH 5W30 (SAE 5W/30) or equivalent oil, checking oil level and testing of engine, complete in all respects.
(OBL LH 5W30 (SAE 5W/30)) | 48 | Ltrs | 550 | ₹26,400 |
| 1.05 | Supply of Roller shear bolt-Screw & nut
(000F3299, D002552) | 50 | Job | 250 | ₹12,500 |
| 1.06 | Supply of Fan shear bolt – screw & nut
(000F3361, D060121) | 50 | Job | 230 | ₹11,500 |
| 1.07 | Greasing on critical componenets of Fresia Snow Blower which include: pin joints of hydraulic cylinders in blower assembly and steering cylinders and linkages, suspension system including pins and spring shackles ( the required amount of grease will be provided by the department). The tools including grease gun involved int he execution of the job are to be provided by the firm | 1 | Job | 1,150 | ₹1,150 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
BOQ_1064844.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .