SPECIAL REPAIRS TO BLDGS No P-5, P-5A, P-22, P-40, P-36 WITH TOILETS AND STORAGE, P-1A, P-1, P-6 AT IBLUR CAMP AND PROVN OF 01 TOILET BLOCK FOR AGNIVEER AT AGRAM DRIVING AREA OF TRG BN (MT) ASC CENTRE (NORTH) UNDER GE (CENTRAL) BANGALORE

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, peir holes, etc. not exc 10 Sqm on plan and getting out in soft/loose soil all as specified & directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in 75 mm thick sub base to floor complete all as specified and directed.

M&L for Rendering 15 mm thick cement mortar (1:4) on block masonry or brick masonary surface of walls finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 15 mm thick cement mortar (1:6) on block masonry or brick masonry surface of walls finished even and smooth without using extra cement all as specified and directed.

M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including backing coat 10 mm thick cement mortar (1:4) all as specified and directed.

Supply only water proofing compound (solid), ISI marked all as specified & directed.

M&L for PCC (1:3:6) type C-2 Using 40 mm graded crushed stone aggregateas in 75mm thick plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.

S&F Aluminium anodized barrel tower bolts 150mm long, extruded section complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type anodized, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for Preparation of newly plastered wall surface and applying three coats of white wash etc complete all as specified and directed.

M&L for Pre-cast Reinforced Cement Concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified & directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips all as specified & directed.

S&F Rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.), conforming to Fe 410 -W (GdeE- 250) quality-A, complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shoulders and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

M&L for Preparation of new steel or iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating ( 150 AZ ) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating (150 AZ ) GI based plain sheet steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws as specified.

Returning filling in, including spreading levelling watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a lavel not exceeding 1.5m above the starting point, complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc.all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish of the premises all as specified and directed.

M & L for pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete all as specified & directed.

M & L for PCC (1:2:4) type B-0 using 12.50mm graded aggregate as in filling in chowkats including necessary formwork etc., complete all as specified & directed.

S&F Rat tail rod pattern spring 300mm MS ordinary including roller and roller plate complete all as specified & directed.

M&L Preparation of new wood or wood based surface over 10cm width or girth.and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and directed.

Dismantling of wall and ceiling board fibre pulp, insulation etc or insulation boards/ clabs blankets any thickness incl cover fillets all as specified and directed.

M&L for rendering 15 mm thick cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing with water proofing compound all as specified and directed. (Note : water proofing shall be measured & paid separately).

Demolition of cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level including terrazzo finish wherever existing complete all as specified

M&L for Plain Cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate for 25mm thick sub base for floor tiles all as specified and directed.

M & L for TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending etc all as specified & directed.

Each Set

M&L for Sadarhalli stone slab 18-20mm thick for skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over & including backing coat 10 mm thick cement mortar (1:3) all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and finishing as per following specifications all as specified & directed :- (i) Applying 1mm thick wall care putty and finished to smooth surfaces (ii) Applying one coat of alkali resitant primer (iii) Applying two coats of Acrylic emulsion distemper

M&L for complete removal of existing treatment of old treated surfaces of wall and finishing as per following specifications all as specified & directed :- (i) Applying 1mm thick wall care putty and finished to smooth surfaces (ii) Applying one coat of alkali resitant primer (iii) Applying two coats of Acrylic emulsion distemper

Demolition of brick work or PCC solid block masonary or stone/boulder masonry built in cement mortar complete all as specified & directed.

Dismantling boarding of any description, fixed in any position with nails complete all as specified and directed.

S&F Aluminium anodized handles of extruded section 125mm long complete all as specified and directed.

Dismantling unframed timber scantling 40 sq cm and over in section in any position complete all as specified and directed.

M&L for Second class hard wood, clean sawn in as in scantling framed and fixed to walls with screws etc complete all as specified and directed..

M&L for Preparing wood and wood based materials surfaces, new or old, of any description and girth, not otherwise described and treated with cresote oil paint complete all as specified and directed.

ame work( White colour) including False ceiling Aluminium snap grid of size 600x600mm duly suspended with 6 mm dia G I hangers (upto1200mm length) adjusting level fixed to roof slab or purlins by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion holdfasteners 12.5mm dia 40mm long complete all as specified & directed.

Taking up or down steel tubing and connections 20mm bore all as specified & directed.

M&L for Rendering 5mm thick cement mortar (1:3) on fair faces of concrete surface of ceiling/Chajjahs finished even and smooth without using extra cement all as specified & directed.

S&F in repairs tubular towel rail, 20mm dia ‘D’ type, 60cm long between flanges, brass chromiun plated complete all as specified & directed.

M&L for Preparation of newly plastered Ceiling surface and applying three coats of white wash complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:4) all as specified & directed.

S & F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty / timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F PVC (SWR) vent cowl for PVC pipe 110mm dia bore all as specified and as directed.

S&F PVC (SWR) vent cowl for PVC pipe 75mm dia bore all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris outside MD land all as specified and as directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm grades stone aggregate as in Padding/levelling course over roof / chajja finished even and smooth without using extra cement all as specified and as directed.

M&L for Rendering 10mm thick cement mortar (1:3) on brick work or concrete surface finished even and smooth without using extra cement including mixing WPC all as specified and as directed. (Note :WPC will be measured and paid seprately).

M & L for water proofing treatmennt over RCC roof slab all as per following specification complete all as specified and directed :- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth (ii) Applying compatible primer/bonding bitumen @ 0.40 Litre/Sq m (iii) Applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.80kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished over and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's

instructions (iv) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m

S & F Sheet glass shelf assembly consisting of 5.5mm thick shee glass shelf 12 cm wide with chromium plated brass bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan ( pedestral Pattern) white, including connection to drain & or out going pipe and to flushing pipe, anti syphonage pipe, with following fitting complete all as specified & directed :- (i) Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repairs Stop Valves / Angle Cock fancy type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for pipes 15mm dia complete all as specified & directed.

S&F in repairs Hand Shower (Health Faucet) 1 Meter Long, brass chromium plated, flexible Tube & Hook complete all as specified & directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring, overall length of cover plate is 140mm complete all as specified and directed.

M&L for Vitrified Ceramic tiles, double charge 10mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm in floor etc, set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over & including 20mm thick screed bed in CM (1:6) all as specified and directed.

S&F in repairs Stainless Steel Kitchen Sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet ( conforming to AISI -304 grade) with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed.

S&F in Repair Sink Cock Wall Mounted with flange, brass chromium plated, fixed to 15 mm dia bore all as specified & directed. (Make:- Prayag Cat No 8316 or equivalent make specified in P S herein after)

S&F in repairs Stainless steel plate rack of size 900mm x 900mm x 250mm, made with 0.63mm thick sheet including fixed with rawl plug and screws on walls all as specified & directed.

S&F Wall mixer for mixing hot and cold water, brass chromium plated, screwed down with provision of over head shower and cock for iron pipe 15mm bore and fixed complete all as specified & directed.

S&F in repairs Two way Bib taps Quarter turn, brass chromium plated smooth finish fancy type with crutch or butterfly handle screwed down, screwed for iron pipe 15mm or for union complete all as specified & directed.

S&F in repairs Shower rose, brass chromium plated, 95mm dia fixing to steel pipe 15mm dia or union complete all as specified & directed. (Make: Cera Cat No-F7020304 or Equivalent make specified in P S herein after)

S&F in repairs toilet paper holder, brass chromium plated, complete all as specified & directed. ( Make: Prayag, Cat No-BA-58 or Equivalent make specified in P S herein after)

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete.

M & L for Concealed Point wiring with PVC insulated and unsheathed FRLS single core multistranded copper conductor cable 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn through and including Concealed PVC rigid non metalic conduit in brick / stone wall conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated unsheathed copper cable as earth continuity conductor to common earth and connecting to earth dolly all as specified & directed for following :-

One light point / ceiling Fan / Exhaust fan controlled by one 5 Amps switch one way

One 3 pin socket point 5 Amp on independent board

One 3 pin socket point 5 Amp on same board with other switches.

All as per serial item No.128 herein before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour all as specified & directed

Note for Item No 128 & 129 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls included in point wiring.

Supply and fix Switch piano, flush button single pole, 5 Amps one way all as specified & directed

Supply and fix Switch sokcet combination, flush type 5 Amps 2/3 pin muliti purpose all as specified & directed

Supply and fix Switch socket combination, flush type 6/16 Amps, 3/3 pin universal type multipurpose all as specified & directed

Supply and fix electronic Fan regulator, step & socket type 230 volt suitable for 1200/1400mm sweep ceiling fan all as specified & directed

Supply and fix Ceiling rose, surface bakelite 65x50mm, three terminals including PVC blocks all as specified & directed

S&F in replacement LED tube light fitting 10 watts capacity 6000K, 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed

S&F in replacement LED tube light fitting 20 watts capacity 6000K, 230 volts, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed.

S&F in repair Bldg security light light fittings 1x 35 Watt LED with New generation energy saving and environmental friendly long life LED made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK 08 with all accessories and including connection up with twine core twisted flexible copper conductor cable 1.5 M long all as specified and directed.

S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board VTPN, 415 volts, 4 way, Vertical type, double door, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & directed.

Supply and fix in repairs Sheet metal enclosure (ISI marked) distribution board, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB, 240 volts, fixed flush in wall surface, and tested on completion complete all as specified & directed.

Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 230 volts, 4 way horizontal type, double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & directed.

Supply and fix MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified & directed.

Supply and fix M

CB single pole & neutral 40 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified & directed.

Supply and fix MCCB Triple pole & neutral 100 Amps 415 volts, C series,16 kA rupturing capacity providing in DB complete all as specified.

Supply and fix in replacement Sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note : Three run of 4sqmm altogether measured as one unit)

Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. (Note : Three run of 6sqmm altogether measured as one unit)

M&L for taking down and dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing etc,re-winding if necessary, finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing , re-assembling & testing for smooth functioning the fan complete all as directed. (Note : Rewinding will be measured & paid seperately)

M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50cycles, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding, drying & re-assembling, testing for smooth functioning etc complete all as directed.

Taking down any type and size of Exhaust fan in any description, repair for smooth functioning, rewinding if necessary, re-assemblying, re-fixing making necessary connections & testing on completion and making good distrubed surfaces of wall, floors, etc complete all as directed. (Note : Rewinding will be measured & paid seperately)

M&L for Rewinding of Exhaust fan with appropriate size of copper enamelled wire including varnishing, heating with proper insulation complete and testing all as specified and directed .

Supply & fixing Exhaust fan of 300 mm sweep heavy duty, double ball bearing, 1400 RPM, metal body , suitable for SP 230 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in any type of masonry wall by core cutting using core cutting machine & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan finally making good the disturbued surface of walls both internal & external to its original specifications complete all as directed. (Note : Quoted rate is deemed to be inclusive of core cutting to wall including finishing the wall surface to its original specifications)

Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Size of 35 sqmm x 3.5 core complete all as specified & directed.

Supply and laying of cable XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Size of 10 sqmm x 4 core complete all as specified & directed.

Supply and laying of cable XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Size of 25 sqmm x 4 core complete all as specified & directed.

Supply and lay common burnt bricks size 230 x 115 x 75 mm,bricks of sub class B,laid at right angle on the cable complete in trenches for cable protection complete all as specified and directed.

Supply and spreading clean dry river sand in trenches for cushioning of UG cables all as per Para 19.75 of SSR Part-I complete all as specified and directed.

Supply and fixing GI tubing light grade 40 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete including taking out if required all as specified and directed .

Supply and fixing Post top lantern LED 20 watt capacity ,warm white 230 volt AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion complete with driver and lamp including pole box complete all as specified and directed.

M&L for PVC insulated 2 x1.5sqmm + 1x 1.5 sqmm earth wire single core copper conductor for connection of post top lantern to Pole Box with PVC conduit complete all as specified and directed.