Loading
Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹2.8 L
Closing Date
8 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 2.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2) 10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIA
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any Signalling Work of EI/PI/RRI/IBH/ABH/ LC Gate Interlocking/Track circuit works/Axle counter works etc.
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
IMPORTANT NOTES WITH NIT: 1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N-HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE-I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer-incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract. 8.It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality. 9.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 10.As per railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e-MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
S&T work in connections with enhancing the system reliability by provision of parallel digital axle counters and UFSBI at Automatic Block Signalling section (BJQ- MAKR) of Jabalpur Division on West Central Railway (Signalling Work).
JBP-N-SIG-TENDER-2025-36~WCR
JBP-N-SIG-TENDER-2025-36
Open
Works - General
11 Months
Jabalpur, Madhya Pradesh
₹0
₹2.8 L
8 Jan 2026
17 Dec 2025
25 Dec 2025
243 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,03,16,981.01 | ||
| — | 1.00 | — | — | ||
| Supply of "Instruments and tool kits required for Trouble Shooting and repair of hardware and software for EI system should be supplied for stations as per schedule item 1 of EI above. (This includes tools required for EI maintenance sorts of crimping, insertion, removal, general purpose, tools like screw drivers, spanners, PCB extractors, temp controlled soldering iron, wire cutter, nose pliers etc. & measuring instruments with carrying case/ holders/cabinet for technicians and J.E for testing, maintenance and repair at site) two sets. Each set comprises of the following: i) Crimping tools for all types of special cable assembly used in EI system. ii) Insertion tools for all types of Special cables assembly used in EI system. iii) Removal tools or all types of Special cables assembly used in EI system. iv) Digital multimetre (Fluke 111 or better) v) Steel cabinet/Almirah/ size 1980mm height, 915 mm width and 485 mm depth (godrej make/Jalaram) of good quality to store tools, spare cards and documents. vi)Steel book rack Size: 1850 mm*900 mm*316 mm (H*W*D)for keeping documents (Godrej make/Jalaram). vii) Clamp earth tester viii) Clamp current meter. Note:- Any other Tools required for trouble shooting and repair and recommended by OEM shall be supplied by contractor free of cost Note: Tool kit supplied by contractor will have to be certified by OEM that these tools are sufficient for maintenance/ Repair/ Troubleshooting. Per Unit = Per Station. INSPECTION BY CONSIGNEE. | — | — | — | 66,250.52 | |
| — | 1.00 | — | — | ||
| Supply Installation, testing and commissioning of Class-A Protection type Surge Protection system Consisting of: - a) Latest guidelines issued by the RDSO/ Railway Board shall be followed for Class A protection. As per NBC 2016, radioactive terminals, such as dissipation systems, ESE, or CSE air terminals, are not permitted. b) The down conductor shall consist of a 50 sq mm copper-bonded steel conductor, securely connected to the air terminal and the earth pit. c) Preferably, Isolated Spark Gap (ISG) of rating 100 KA shall be used to interconnect lightning arrestor earth pit to signal ring earth d) Lightening counter testable of 6 digits non resettable type of stainless steel of material having IP 65 protection manufacturer of 6 digit non resettable type of stainless steel material having IP 65 Protection." Note: OEM certification as per RDSOTAN to be submitted after commissioning. SUPPLY PORTION INSPECTION BY CONSIGNEE. | — | — | — | 1,07,135.46 | |
| — | 50.00 | — | — | ||
| Supply of QNA1 (Ac Immunised Relay), 8F-8B, 24Vdc Along With Plug Board (Base Plate), Retaining Clips And Connectors Conforming To Brs:931A, Irs:S34 & Irs:S23. INSPECTED BY RDSO. | — | — | — | 1,90,558.5 | |
| — | 2.00 | — | — | ||
| Supply & Installations of Axle counter cable conductor's earth resistance sensing unit, Micro pro controller based for 24 nos. conductors with Metering facility for one conductor at a time As per specification attached. Make: Reliance Electricals or equivalent. Installation of Axle counter cable conductor's earth resistance sensing unit, micro pro controller based for 24 nos. conductors with Metering facility for one conductor at a time. SUPPLY PORTION INSPECTION BY RDSO. | — | — | — | 1,64,415.22 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multistrand copper conductors, 1x6 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY/WARRANTY CERTIFICATE. | — | — | — | 74,438.47 | |
| — | 0.20 | — | — | ||
| Supply of Jumper wire 1X1mm dia as per RDSO spec, IRS: S-76/89 with latest amendments of various colours. INSPECTION BY CONSIGNEE. | — | — | — | 1,662.7 | |
| — | 2.00 | — | — | ||
| Supply of flexible cable single core multistrand copper conductors, 1x2.5 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 43,075.84 | |
| — | 2.00 | — | — | ||
| Supply of PVC insulated railway signalling indoor single core [tinned jumper wire] 1X 0 . 6 mm dia as per RDSO spec. Nos. IRS:S-76/89 with latest amendments of various colours. INSPECTION BY CONSIGNEE. | — | — | — | 7,925.6 | |
| — | 10.00 | — | — | ||
| Supply of PVC insulated flexible wire 16/0.2 mm dia as per RDSO spec. No. IRS:S- 76/89 with latest amendments of various colours.(Red ,black &grey) with OEM guaranty/warranty certificate. INSPECTION BY CONSIGNEE. | — | — | — | 62,946.9 | |
| — | 1.00 | — | — | ||
| Supply o f flexible cable single core multistrand copper conductors, 1x10 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 1,19,717.3 | |
| — | 0.20 | — | — | ||
| Supply o f flexible cable single core multistrend copper conductors, 1x25 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 56,147.67 | |
| — | 0.75 | — | — | ||
| Supply o f flexible cable single c o r e multistrend copper conductors,1x16 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 1,32,786.01 | |
| — | 20.00 | — | — | ||
| Supply of Earth Electrode assembly as per Drg.No.S&T/CON/KOTA/Earthing/01 INSPECTION BY CONSIGNEE. | — | — | — | 23,952.8 | |
| — | 10.00 | — | — | ||
| Supply of Phenolic Laminated sheet, resin bonded 10mm thick, grade P3 in standard size of 1.22X1.22 Mtr as per spec. Nos. IS 2036 of 1974. INSPECTION BY CONSIGNEE. | — | — | — | 39,578.1 | |
| — | 2000.00 | — | — | ||
| Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/SPN/189/2004 ver 3.0 with latest amendment. INSPECTION BY CONSIGNEE. | — | — | — | 1,61,880 | |
| — | 200.00 | — | — | ||
| Supply of end plate suitable for disconnect terminal. INSPECTION BY CONSIGNEE. | — | — | — | 2,418 | |
| — | 40.00 | — | — | ||
| Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. INSPECTION BY CONSIGNEE. | — | — | — | 5,736.8 | |
| — | 400.00 | — | — | ||
| Supply CONSIGNEE. | — | — | — | 4,232 | |
| — | — | for | INSPECTION | ||
| — | 300.00 | — | — | ||
| Supply of GI pipe as per Specn.No. IS 1239 (Part-1)/1990medium class normal bore of100 mm, nominal mass of Tube12.5 Kg (+/-) 10% per meter and complying parameters of specification. INSPECTION BY CONSIGNEE. | — | — | — | 3,49,191 | |
| — | 600.00 | — | — | ||
| Supply of DWC pipe 120 mm outer dia 103.5 mm inner dia made of polyethylene in 6 mtrs. straight lengths along with one coupler for every 6 mtr.as per specn. Is14930 or latest antirodent and flame retardant. Or as per site requirement. INSPECTION BY CONSIGNEE. | — | — | — | 1,77,588 | |
| — | 400.00 | — | — | ||
| Supply of ARA Terminal Blocks with links made of PBT specn. No. IRS75/2006 (Rev.2) with latest amendments and RDSO Drg. No. SA-23741A. INSPECTION BY RDSO. | — | — | — | 27,032 | |
| — | 100.00 | — | — | ||
| Supply of cartridge fuse block made of PBT as per RDSO Drg. Nos. SA - 23748 Alt. 4 and Spec. Nos. IRS-S-75/2006 with latest amendment. Fuse block shall be suitable for round head type fuses. INSPECTION BY RDSO. | — | — | — | 18,044 | |
| — | 200.00 | — | — | ||
| Supply of non-deteriorating type low voltage cartridge fuse rate current 2Amp (qty (30%) / 4A( qty. 40%) /6A(qty. 10%) /10 A(qty 20%) in equal proportion round head type as per spec No IRS/S/78/92 with latest amendment. INSPECTION BY RDSO | — | — | — | 15,622 | |
| — | 3.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos. IRSS 30 & RDSO Drg.Nos.WCR/DY.CSTE(Con)/KOTA/3with latest Amendment) on both the doors, duly painted with red oxide. Single case as per Drg Nos. WCR/DY.CSTE (Con)/ KOTA/3 with latest alteration. INSPECTION BY CONSIGNEE. | — | — | — | 38,654.88 | |
| — | 3.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos. IRSS 30 & RDSOWCR/DY.CSTE(Con)/KOTA/3with latest Amendment) on both the doors, duly painted with red oxide. Half case as per Drg Nos. WCR/DY. CSTE(Con)/ KOTA/3 with latest alteration. INSPECTION BY CONSIGNEE. | — | — | — | 35,314.02 | |
| — | 7.00 | — | — | ||
| Supply of PLB-HDPE duct outer diameter 40 mm & inner diameter 33 mm as per RDSO/SPN/TC/45/2013, Rev.2.0,Amendment 1-3, or latest with all accessories as described in RDSO specifications. INSPECTION BY CONSIGNEE. | — | — | — | 3,76,945.03 | |
| — | 2.00 | — | — | ||
| Supply of covered 19'' Racks of size 2200 mm X 600 mm X 600 mm (WQ/Vero President/Rittal/APC make or similar) complete with all fittings including DC Fans (48 V) -2 Nos. separator sheet/plate to keep testing equipment's - 1 No and AC Power distribution panel (horizontal fitting) with power sockets and fuse/MCB protection (minimum 6 Nos. of 230V- 15A/5A. combined) and other accessories. Rack should have compatibility with all equipment conforming to DIN 41494 or equivalent EIA/ISO/EN standard, Manufacturer must certify that products are complied with DIN41494 or equivalent EIA/ISO/EN/CEA/UL standards INSPECTION BY CONSIGNEE. | — | — | — | 72,819.18 | |
| — | 2.00 | — | — | ||
| Supply of LAN Extender 04 port as per RDSO specification no. RDSO/SPN/TC/82/2020 Rev 2.0 with latest amendments, Versions. Make- Team Engg./Cygnus or similar INSPECTION BY CONSIGNEE. | — | — | — | 48,288.28 | |
| — | 4.00 | — | — | ||
| Supply of OFC integrated access device 1U height or1.5 U height/19" rack mountable for LVCD/Digital Axle Counter purpose with four tributary slots & four potential free contacts to know quad status , front panel Quad indication status vide LEDs, Optical support vide 4 SFP port supporting TDMoIP in the unit supporting dual core OFC and 04 100/1000 mbps Ethernet port (POE or NON POE as required at site ) for surveillance/smoke detector, optical SFP ports provided distance support to be 20 KMs, unit to support one E&M card supporting four 2W/4W configurable & four quad port 2W/4W. Each port configurable to support axle counter/UFSBI/control phone/EC/RTU and one telnet/SNMP port, unit to support 04 E1 ports in addition to 04 SFP ports of TDMoIP, dual DC power supply 18 to 72 VDC support , unit to support change over mechanism automatic between E&M (V.21) to E1 port & optical fibre TDMoIP (SFP) & quad path for E&M interface option, one number cable to be provided along with E&M. Equipment should be able to integrate with STM E1 & IPMPLS 1Gbps ports FABIO 2CX+/OFC/ DC & module 2W/4W four port E&M (1+1) pro ection Make: TEAM ENGG/FABIO or equivalent. SUPPLY INSPECTION BY RITES. | — | — | — | 9,14,397.88 | |
| — | 1525.00 | — | — | ||
| Supply of STP Cat 6 cable. It should be compliant with latest EIA/TIA-568-B.2-1 standard Make-D-link/ syrotech/Digisol or similar. INSPECTION BY CONSIGNEE. | — | — | — | 44,270.75 | |
| — | 2.00 | — | — | ||
| Supply of Rack 24U with all accessories as per specification attached. Make- Comrack, Rittel, D-Link or similar INSPECTION BY CONSIGNEE. | — | — | — | 25,792.8 | |
| — | 200.00 | — | — | ||
| Supply of switch board cable 0.5 mm/10 pair. Copper conductor of reputed make. Make Finolex/Bhansali / Delton or equivalent INSPECTION BY CONSIGNEE. | — | — | — | 8,456 | |
| — | 200.00 | — | — | ||
| Supply of PVC Cable 5 pair 0.5mm dia. Copper conductor of reputed. Make- Finolex/RR Kabel /L&T or equivalent. INSPECTION BY CONSIGNEE. | — | — | — | 4,680 | |
| — | 8.00 | — | — | ||
| Supply of Fibre Media Convertor (Gigabit). Make -Teamlink / Mrotek or equivalent. INSPECTION BY CONSIGNEE. | — | — | — | 46,845.44 | |
| — | 2.00 | — | — | ||
| Supply of L2 Manageable non-POE 24 port switch with minimum 02 SFP ports. Make- CISCO/HPE/Juniper or equivalent. INSPECTION BY CONSIGNEE. | — | — | — | 28,320.36 | |
| — | 20.00 | — | — | ||
| Supply of OFC patch cord Type LC-SC or SC-SC (as per site requirement) Length 10 Mtrs of reputed make. INSPECTION BY CONSIGNEE. | — | — | — | 6,382.4 | |
| — | 8.00 | — | — | ||
| Supply of PIJF CABLE JOINTING KIT as per RDSO Spec. No.RDSO/SPN/TC/57/2015 Rev.1Amdt-1 or latest (TSF-3). Inspection by RITES/TPI | — | — | — | 12,302.4 | |
| — | 6.00 | — | — | ||
| Supply of 24F straight joint enclosure (SJC) complete with all accessories as per TEC Specification TEC/GR/TX/OJC-002/03/APR/2010 or latest of reputed make like Raychem, BirlaVXL, 3M, shakti or similar. INSPECTION BY CONSIGNEE. | — | — | — | 21,595.14 | |
| — | 16.00 | — | — | ||
| Supply of Thermo Shrinkable Jointing Kit (TSF4) as per spec.no. IRS TC.77/2012 (Rev3.0) amdt 3 or latest for joints for 6 Quad cable of 0.9 mm dia conductor jelly filled UG cable from RDSO approved firms. INSPECTION BY RDSO. | — | — | — | 47,404.96 | |
| — | 10.00 | — | — | ||
| Supply of Analog push button telephone phone with CLI facility. Make-Beetle/BPL or similar. INSPECTION BY CONSIGNEE. | — | — | — | 7,724.5 | |
| — | 2.00 | — | — | ||
| Supply of Limit Switches New Top Roller Type with 2 NO +2 NC Contacts suitable for Heidz make or similar POLB. OEM/Authorized vendor warranty certificate along with authorization letter of OEM to be submitted before supply of material. INSPECTION BY CONSIGNEE. | — | — | — | 2,047.54 | |
| — | 8.00 | — | — | ||
| Supply of Rack Mounted Fibre Management System (Fully loaded) 19'' rack mountable for 24 fibre FMS of SC adapters of reputed make. Inspection by consignee | — | — | — | 1,09,424 | |
| — | 2.00 | — | — | ||
| Supply of Optical Power Meter optical light source & visual fault locator, 10mw optical power meter with visual fault locator with optical laser source combined of reputed make. INSPECTION BY CONSIGNEE. | — | — | — | 22,500 | |
| — | 3.00 | — | — | ||
| Supply and installation of class- B type lightening arrester for single phase supply along with class-c type surge arrester for single phase supply as per WC railway specification No WCR/SPN/Tele/08/01. INSPECTED BY CONSIGNEE. | — | — | — | 13,873.14 | |
| — | 10.00 | — | — | ||
| Supply of Desk type Electronic Magneto Telephone as per spec No IRS TC79/2000 or with latest Amendments. INSPECTED BY CONSIGNEE. | — | — | — | 31,416.3 | |
| — | 1.00 | — | — | ||
| Supply of VDU Monitor unit of size 55 inch as per specifications. The display of VDU shall be compatible for 4K resolution to accommodate large yard layout. Make Sony Model (KD- 55X82L)/ Samsung/ LG or similar. INSPECTED BY CONSIGNEE. | — | — | — | 67,193 | |
| — | 3.00 | — | — | ||
| Installation & Supply of SMPS BATTERY CHARGER 48V DC/50AMP single phase 230 VAC operated FR-FC battery chargers for telecom use as per installation in N+1 as per specification No. RDSO/SPN/TL/23/99(VER.4) WITH LATESTAMND. INSPECTION BY RDSO. | — | — | — | 3,93,750 | |
| — | 3.00 | — | — | ||
| Installation and Supply of SMF VRLA BATTERY SET OF RATING 48V/300AH PRE CHARGED COMPLETE WITH INTER CELL CONNECTOR CONSISTING OF 24 CELLS OF 2V 300AH , AS PER RDSO Spec No IRS. S-93/96[A] INSPECTION BY RDSO. | — | — | — | 4,28,160 | |
| — | 100.00 | — | — | ||
| Supply of Para mite Battery Wire / Cable Colour Black Red and Green. conforming to RDSO Specn. No. RDSO/PE/Spec/TL/0027-2002 (Rev 0) or later. As per clause mentioned in Annexure-1 of tender documents INSPECTION BY CONSIGNEE. | — | — | — | 15,000 | |
| — | 2.00 | — | — | ||
| Supply of SEALED MAINTENANCE FREE VRLA BATTERY SET OF 60 CELLS 2V/200 AH CAPACITY EACH (STACKABLE), IN COMBINATION OF 55+5 CELLS FULLY CHARGED FOR SMPS BASED INTEGRATED POWER SUPPLY (IPS) SYSTEM, CONFORMING TO RDSO SPECIFICATION NO. IRS: S- 93/96(A) AMENDMENT NO.1 COMPLETE WITH CONNECTING LINKS AND SUITABLY NUMBERED IN STACKABLE RACKS ALONG WITH USER MANUALS. INSPECTION BY RDSO. | — | — | — | 4,31,823.36 | |
| — | 6.00 | — | — | ||
| — | 16.00 | — | — | ||
| — | 20.00 | — | — | ||
| — | 6.00 | — | — | ||
| — | 6.00 | — | — | ||
| — | 3.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCWORKS2022ACS1TO10.pdf
ATTACHMENT
JPO10-1-2412-6-23.pdf
ATTACHMENT
TD-36-BJQ-MAKR-R-1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .