A/R and M/O office building of Director of prosecution , Block No. 22 SDA Complex Kasumpti Shimla 9

Amount

Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) Cement Mortar 1:5 (1 Cement : 5 Sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(i) Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in- charge. (i) Second class deodar wood (a) 40 mm thick shutters

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 40 mm thick shutters. (A) with ISI marked M.S. pressed butt hinges bright finished of required size (a)Second class deodar wood

Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 125 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 200x10 mm

(ii) 150x10 mm

Providing and fixing Brass sliding door bolts, ISI marked with nuts and screws etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 250x16 mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing bright finished brass hard drawn hooks and eyes including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(i) 150 mm

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 12 mm thick

Providing and fixing pine wood lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 12 mm thick

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(a)2nd class teak wood (i) 50x50 mm (base and height)

(iii) 25x25 mm (base and height)

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and Fixing HD4 Flooring including carriage of materilas in all ledas and lifts as per directions of the Engineer-in-charge.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (i) Clerestory window chowkhats

(ii) Door chowkhats

Providing and fixing bubble plastic sheet for panelling including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) Thickness above 10 mm up to 25 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) Of area 3 sq. metres and below

(ii) Of area beyond 3 sq. metres

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) cement mortar 1:4 (1 cement : 4 coarse sand)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) In cement mortar

Providing and fixing teak ply including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 6 mm

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 6mm thick

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood.

Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.

Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) One or more coats on old work

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.

Providing and fixing toughened glass including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 6mm thick

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Polishing two coats with P.U. polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Applying sealar on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing zebra blind in windows including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE De DECOR

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. (Only weight of grill to be measured for payment).

Parikshit Thakur

babu ram