Renovation Works for KS67 at ACTREC Kharghar

Amount

Civil Work

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.: In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material Outside ACTREC as per direction of Engineer -in - charge. Nominal concrete 1:3:6 or richer mix (including equivalentdesign mix)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge.

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard the setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and then finishing as per direction of the engineer-in-charge; for the following grade of concrete.: Concrete of M20 grade with minimum cement content of 270 kg /cum.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5 mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement screws / fasteners @ 60 cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately Cement Bonded particle board 8 mm (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995board as per standard sizes fixed with self-drilling / taping

WOODEN PARTITION Providing making erecting partitions (partly glazed partly panneled or fully panneled) to required ht. With teak wood frame of 50mmx50mm in 600mm sq. panel or as required at site the wooden panneling with 6mm commercial plywood of approved make and quality on both sides of partition with 6mm groove. The glazed portion teak wood 30mmx12mm bedding on both sides to the required shape skirting at bottom on both the sides to required shape and skirting at bottom on both sides with 125mm x 12mm teak wood and top patti with 125 x 20mm T.W.to required flap/or as filler between the wall/ceiling/flooring and partition. The glazed portion of the partition. The glazed portion of the partition shall have approved make/quality –plain/frosted/bazri 4mm thick glass. Above partition shall be provided with partly glazed partly pannelled 35mm thick Hollow core door of required size or as required with necessary teak wood door frame 75mmx50m m and the shutter shall be hinged or sliding and the glazed portion with 4mm plain or frosted glass sheet, beeding alround the shutters, locks, tower bolts, mortice lock with handle suitable size Nos. 2 door closer of everite make and any other fittings & fixtures required all as specified and directed. Fully paneled.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting: Providing and applying One /Two coat primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints Using Luster Paint(Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturer’s instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge.

Providing & fixing Roller blinds (Premium quality) of approved make with heavy duty roller brackets & necessary fixtures. Warranty for roller mechanism & others accessaries shall be for One year from date of installation. [AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

Removing of Existing false ceiling & Existing AC duct (if any) and stacking the serviceable material as directed by EIC.

FANCY PILLAR TAP: Providing & fixing approved make heavy quality C.P. brass screw down pillar tap with jam nut easy clean variety of 15 mm n.b. etc. complete all as directed by the Engineer-In-Charge (work includes removing old fittings and fixtures and handing over the same)

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. SS Sink WITH DRAIN BOARD (ELEGANCE 1.00MM THICK)1145mm x 510mm large x 200mm

NAHANI TRAP:Providing & fixing 100mm dia C.I heavy duty nahani trap with brass C.P. dome type heavy duty S.S. jali all as approved make quality as specified and directed by engineer in charge one way/two way need concrete joints.

TEAK WOOD DOOR FRAMEProviding wood work with C.P. teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitomastic paint to the surface of wood in contact with masonry/ concrete etc.complete. In frames of doors, windows, ventilators and clearstorey windows etc. fixed with M.S hold fast of size 40x3mmx150mm long bend to shape & embeded in cement concrete 1:2:4.

FLUSH SHUTTERProviding & fixing in position/flush door of shutters block board solid core internally lipped bonded with water proof type synthetic resin hot pressed with marine ply finished on both faces including prov. And fixing teak wood 20mm thick lipping on all sides fixing heavy duty approved make 4 levers mortice lock with pair of handle of approvd make & quality brass/S.S . fittings such as hinges, tower bolts, of approved make fixing fixtures locking arrangements with fixing fixture locking arrangements with screws etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge. 32 / 35 mm thick

C.P.V.C. PIPE- CONCELEDproviding, laying , jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (prince, fiNoslex, supreme, liason, Astral make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings etc. complete all as per specified and directed by Engineer in Charge. 15mm n.b

DOOR CLOSERProviding & fixing door closer of Everite/Hyper make confirming to is 3564 (left or right) to the existing door shutter including cost of all other materials labor etc. all complete as specified and directed. Archies make hold open arm door closer

Hyper make

COMPUTETR TABLEProviding making & supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves & shutters making concealed monitor arrangement by providing 8mm thick clea r glass on table top of required size with edge polish as shown in drawing drawer and ready made key board drawer with heavy sliding channels with powder coated handle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.5mm thk laminate of approved colour and non laminated area should be french polished inclu. cost of other materials labor etc. as per drawing and as specified and directed by Engineer-In-Charge. Computer Table with all inner surface with 1mm thk approved laminate.

Storage Unit for Labs: Storage Unit Twin type unit of all sizes as shown in drawing partly drawer partly shelve of fully drawer with heavy duty sliding channel unit made out of 19mm thick commercial ply for sides shelves, shutter, drawer front & sides with 8mm thk. ply for back side of unit with shelves all sides top bottom All exposed faces should be 1.5mm thick approved laminate and balance area should be 1mm thick lamination or two coat french polish strictly as per the instruction of Engineer-incharge including using heavy duty hardware like hinges,tower bolts of Archies make and Godrej multipurpose lock with powder coated C type handle as per required shed etc. complete all as specified & directed by Engineer-In-Charge

GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen/ toilet platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels of colour black/red/grey etc. The rate also includes removal and dismantling of old granite and including supply and installation of cudappah support.

Providing & laying poly vinyl chloride (PVC) rolls flooring manufactured of approved make and approved pattern for flooring, skirting/dado laid on existing cement tile or concrete of plastered floor finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete generally as per manufacturer’s specifications. Providing & laying new 3mm thck PVC flooring tiles.

ALUMINUM SLIDING DOOR Providing and fixing sliding door to consist of partly glazed panneled / fully panneled / fully glazed with using 5.5mm thick glass sheet of approved make and quality plain/ forsted / bajri glass of approved make M/S. Triveni/Shri. Vallabh /J/A/J pilkinten fixed with aluminium slopping channel beeding with two nay PVC lining/rubber gasket to ensure water tightness and Nos rattaling and panneling with 12mm thick Nosva pan or ancholam board prelami rated on both side as required 15 section, guiding rail section 2635, vertical rails section 4506 including providing PVC Guidrails of six 12mm x75mm as required at size concealed type locking arrangement with Laxmi of Gold make lock and heavy duty handle set as per requirement including providing & fixing pelmet of 18mm thick commercial ply of kitply/Mysor/Century/ Anchor make with approved laminate of 1.5mm thick and teak wood lipping patti and Nosn-laminated surfaces should be polished with approved french polish at required shade & colour. With ANosdizing / powder coating Partly glazed partly panneled.

HARDWARE FIXTURES & FITTINGSProviding and fixing or replacing following fittings by removing the old fittings at various locations including cost of all other materials labour and necessary allied works and handing over the old material to the Dept. all complete as specified and directed. Door closer Everite / Henko / Hyper

Providing & making of fully drawer storage unit made up of 19mm thk. Commercial plywood with heavy duty sliding channel & with 6mm thick commercial plywood for back . 19mm plywood for top, bottom, front of shelves. Side of the drawer to be of 12mm thick & bottom to be as per the requirement. 1mm thick approved laminate to be fixed on exposed surfaces of unit. All faces to be laminated. Including items such as lock, hinges, tower bolt, handle to be of heavy duty & approved make only.

Disposal of building rubbish / malba / similar unserviceable, dismantled, or waste materials by mechanical means, including loading, transporting, and unloading to an approved municipal dumping ground or as approved by the In-charge, out of ACTREC campus premises for all leads, including all lifts involved.

Electrical

SITC of Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

SITC of Secondary light point from first light point to second light point connected in the same switch ie looping point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

SITC of Wiring for fan point with modular 2 module fan regulator 250w and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

SITC of Wiring for circuit/sub main using 2.5 sqmm, PVC insulated, FRLS, stranded, flexible copper conductor wires.

SITC of Wiring for circuit/sub main using 4 sqmm, PVC insulated, FRLS, stranded, flexible copper conductor wires.

18W surface mounted LED lighting fixture

Supplying and fixing the following size/ modules, PVC box for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual. 1 or 2 Module

Supplying and fixing the following size/ modules, PVC box for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual. 6 Module

Supplying and fixing the following size/ modules, modular base & cover plate for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual. 1 or 2 Module

Supplying and fixing the following size/ modules, modular base & cover plate for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual. 6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Modular switch 6A/16A

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Modular Socket 6A/16A

Supplying and fixing 16 to 25A MCB with provided Modular box and face plate surface / concealed type including connections as required.

Providing, fixing & commissioning of ceiling fan 1200 mm sweep White colour as per requirement, including down rod, double ball bearing, etc, all as per instructions and as directed by E-I-C, ES.

SITC of Cat 6 type I/O with RJ 45/11 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

Supply & laying of CAT-6 cable through provided casing-capping, PVC conduit all as directed by O-I-C, ES

Supply & Fixing of 25 mm size PVC rigid conduit with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

Supply & Fixing of 1.25-inch casing capping with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

Split AC Supply, Installation, Testing and Commissioning of DX type Split AC the Casing has to be as per OEM(ABS casing) , 3 Row Deep cooling coil with coper tube diameter is 9.52 mm and thickness 0.33 mm with hydrophilic Aluminium fins. Complete coil must be designed for standard working pressure is 1.6 MPa(16bar) and the test pressure is 3.3MPa(33bar). (minimum nominal capacity 1.5 Ton Non-Inverter type and Copper Condensing & Evaporative Coil minimum 5 Star single phase of 230V ± 20V & 50Hz ± 5Hz)Drain pump & necessary supporting arrangement. Minimum Capacity should be as follows: Each Unit to be provided with Cordless Remote with Temperature display. It has to based on microprocessor operations which can realize intelligent control of room temperature. 1.5 TR

Accessories

SITC of Copper Pipe 5/8'' & 3/8" with Insulation sleeve (in pair) as per suitable size and capacity

SITC of Flexible Copper Cable 4C x 2.5 sqmm

SITC of Drain UPVC Pipe 25mm with fittings with class O Insulation

SITC Of PVC Cassing Patti 3'' with fitting

SITC of Outdoor Stand as per instructed by EIC

Dismatling of existing ducting, grill, dampers, and accessories etc as per instructed and as directed by OIC-ES

Ansaruddin K Khatib (BID ID -3246029)