SPECIAL REPAIR TO BLDG NO P 429 SINGLE LIVING ACCN OF OR 661 AVN SQN BLDG NO P-32 AND T 5 OF 4 GUARDS AND PROVN OF ONE SENTRY POST ALONGWITH SHED AT CP 10 AT JALANDHAR CANTT UNDER

Amount

Schedule 'A' Part-I (B/R Works)

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.

M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.25kg per sqm incl cleaning surfaces over bitumen primer @0.30kg/sqm complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3.60kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application

M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

dittio as per item No 8.00 but except tiles.

M&L for new surface of roof of any description not other wise described over 10cm width or girth and applying Two coat of aluminiam paint complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster on brick wall including raking out joints hacking for key srcubbing down with water complete all as specified and as directed

M&L rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed

M&L rendering 15 mm thk in cement mortar 1:4on fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement. (Ceiling)

M&L for preparing new plastered surfaces of wall and applying 2 coats of cement based paint over a coat of cement primer.

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.

Preparation of new plastered surface of wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new plastered surface of wall and applying two coat of white wash complete all as specified and directed

Complete removal of existing treatment on wall and applying two coat of oil emulsion distemper of putty filling over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on wall and applying Two coat of CEMENT BASE PAINT on over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coat of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick,including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: The rate quoted by the contractor shall be included for scaffolding, welded mesh etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)

Demolition cement concrete(unreinfored) as in ground floor and paving not exceeding 15cm thick below or above the ground level

M&L 50mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed

M&L machine cut kota stone flooring 20 to 25 mm thick over cement sreed beed 1:4, 20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shed of the slab including rubbing polishing as in landing of stair complete all as specified and as directed

All as per ser item No 25 above but as in skirting/risers over rendering 10mm thick cement mortar 1:4

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed

M&L glazed ceramic digital colour tiles 300mmx450mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed

M&L non skid ceramic colour tiles 7 to 8mm thick joint free edge cut area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry in floor and pointed in colour cement to match the sade including sceed bed or bedding layer of mortar 15 mm thik 1:4

All as per ser item No 29 above but as in vertical surface including cement mortar rendering screeding 1:4 10 mm thick

Demolition cement concrete(unreinfored) as in ground floor and paving in any description as in sunken floor

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.

M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor

Demolition of brick built in cm including all quoins arches pillars etc.

M&L Brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cm 1:6.

All as per ser item No 38.00 but except brick. Note: Old bricks obtained from demolition will be re-used

Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 36 above but exc 1.5 sqm but not exc 4 Sqm each

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per item No 41 and above but window with glazed shutter

S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm

M&L 35 mm thick 2nd class hard wood plain framed panelled shutters with panels of timber flat on both sides(feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified & directed.

S&F 35mm thick second class hard wood locally fabricated glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I para 8.24(A)

S&F IInd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all labours articles n. exc 200 cu cm each complete all as specified and as directed.

S&F Mild steel barrel tower bolts,ISI marked stove enamelled black, with bright bolt and fixed complete all as specified and directed 200mm long

S&F mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed 150mm size

S&F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane

S&FSolid PVC Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, suppling& fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

S/F 125mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.

S&F aluminium anodised barrel tower bolt of extruded section of 200mm size

S&F Butt hinges 100mm extruded aluminium alloy with mild steel hinge pin and fixed complete all as specified and as directed .

S&F 300mm mild stell ordinary rat rail pattern spring including roller and roller plates complete all as directed

M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles

S&F in repair PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

S&F in repairs Chromium plated grating 75/100mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed

S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

Supply & fix only 32mm dia waste fitting brass chromium plated for basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed

S&F in repairs 15mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore

S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

M & L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity incl dismantling water tanks and removing to store any description.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule 20mm bore

S&F in repair brass chromium plated shower rose 125mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed

S & F Stop cock/angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore.

S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.

S&F Fixed in repairs brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete.

S&F epoxy powder coated pelmet rods of mild steel with and including pair of brackets decorative finials (at both side), complete fixed as in repair.

Demolition and breaking up of drain pipes (salt glazed ware or AC or reinforced cement concrete), set in cement mortar, dia of pipe100/75mm, complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F PVC SWR bends of 110 mm bore.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F PVC SWR bends of 75 mm bore.

S&F PVC (SWR) junction single (single/double T) equal or unequal provided with access door of 110 mm dia.

M&L preparing new surface of wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of newly surface of steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer

Preparation of old steel surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint complete all as specified

Preparation of old wood and wood based surfaces of any description over 10CM width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in floor

M&L chequered cement concrete tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry and pointed with grey cment and pigment including cement mortar screed bed 1;4 15mm thick

Dismentling Timber scantling 40 sqcm over in section in any description

S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed

S&F rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other etc connecting plates Fe 290 (Gde E-165) as in fencing posts

Dismantling AC sheet roofing with ridge (corugated or semi corrugated)

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

Dismantling of ceiling boards of any description and thickness including cover fillets complete all as specified.

S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runnder 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dia GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purling/roof with alignment clip incl providing provn for light fixtures of any size complete

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dence soil

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in any type of soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm

Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L hard core of broken stone boulders of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thck watered and ramemed to a true surface

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L RCC work nominal mix type B1, 1:2:4 (using 20mm graded aggregate ) as in beams, cantilevers bressumers, lintel over 1.5 mtr span

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed

M&L RCC work nominal mix type B0, 1:2:4 (using 12.5mm graded aggregate ) as in slab supported on walls, beam, and column,in floor, roof landing balconies , canopies, deck slab, and shelves and the like complete all as specified and as directed

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L form work to to soffits of suspended slab such as roof slab , floor slab etc for flat surfaces.

M&L formwork to chullah hoods, chajjas, troughs and similar items including edges for flat surfaces.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm getting out in soft/loose soil.

M&L for Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete.

M&L 100mm thick PCC 1:2:4 type B2 (using 40mm graded aggregate) as in floor finishing the cement concrete surface even and smooth with out using extra cement complete all as specified and directed

Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed

Schedule 'A' Part-II (Internal electrification)

Taking down carefully aluminum point wiring light /fan /light socket /power with fitting such as ceiling rose, air condition socket, Pendent, regulator, light fitting, street light etc which are not required for use and removing the material from site and making good the surfaces of walls ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light /call bell/fan point controlled by one, one way switch complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on same board complete all as specified and as directed.

Material and labour for concealed point wiring with 2.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for 15 Amps switch socket combination outlet on independient board complete all as specified and directed

Material and labour for concealed point wiring with 4 Sq.mm (nominal area) four core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for AC on on independent board complete all as specified and directed

Supply and fixing swithc piano flush type, 5 amps, 230 AC, single pole, one way

Supply and fixing socket out let 5 amp 5 pin flush type

Supply and fixing switch socket combination outlet universal type 6 pin 5/15 amp multi pin on independent board.

Supply and fix bell push flash piano type 5 amps

Supply and fix ding dong bell, AC 230 volts, single pole push flash piano type 5 amps

Supply and fixSPN enclouser with a two pin and earth plug and socket complete with one MCB 20A

Taking down U/S submain wiring of any size and make

M&L for submain wiring with two single core 4 Sqmm PVC insulated copper FRLS drawn through PVC rigide concealed conduit and conduit acessaries and 4 sqmm PVC insulated copper wire for continuous earth continity conductor all as specified and directed

Supply and fixing for batton holder insulated body with 5 watt LED bulb all as specified and directed

Supply and fixing stepped socketed type electronic fan regulator flush type and connecting up complete 230/250 volts as diredcted by Engr-in-Charge

Supply and fixing in replacement LED battern light fitting 20W (double side) decorative ultra slim aluminum square profile LED light fixture 6500K (white light) fixture box type with retrofit LED rod 20 Watt and connecting electricity to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed

Supply and fixing in replacement LED street light fitting 20W including LED lamp pressure die cast aliminum IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and directed by Engr-in-Charge

Supply and fixing ceiling rose surface type bakelite 65x50mm three terminal

Taking down DBs/Main swithc board of any size and kaing good disturb surface of wall/floor complete all as specified and directed

Supply and fixing sheet metal enclosure for single door BDs when MCCB to be used TPN 4 way with 200 amps rated bus bar double

Supply and fixing MCCB, 4 POLE, 100 Amp, 16 KA breaking.

Supply and fixing DB, SPN 8 way double door for MCB, 240 volts with 200 amps rated bus bar

Supply and fixing for isolator SPN 40 amps 240V

Material and labour for MCB SP 6 to 32 Amp

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burned directly in gound (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal gound level connected to GI earth wire will be protected by 15 mm dia GI pipe light grade watering pipe 20mm dia GI light grade GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation and earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and directed Note: Result should be less than 3 Ohm

Supply and fixing GI tubing light grade 40mm bore with all necessary fittings laid in trenches under road crossing, in floors or fixed to poles/DB for cable protection etc complete all as specified and directed

Taking down XLPE insulated, armoured heavy duty electric cable with aluminum conductor.

Taking down XLPE insulated, armoured heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 4 core 50 Sqmm on floor/wall including lugs & fitting

Supply and spread river sand in trencesh as cable cushioning 8cm below cables and 15cm above the cable all as specified and directed

Supply and fixing exhaust fans metal body heavy duty AC single phase 230/240 V of size 300 mm sweep with louver, including cutting hole on wall as required for fixing and electrical connection upto ceiling rose

Supply and fixing socket combination 6 pin 15 amps flush type multipurpose 230/250 volts, AC with ISI marked

Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with 5 watt bulb

M&L for sub main wiring with two single core PVC insulated and unsheathed cable 6 Sqmm with multi standard copper conductor, FRLS type cable drawn through and including PVC concealed conduit not less than 25mm in size complete with all accessories alongwith provn of 6 Sqmm PVC insulated and unsheathed, multi standered copper conductor, FRLS type cable as earth wire

Supply lay cable XLPE insulated creened PVC bedded, glavanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with standered aluminum conductor of size 25 sqmm 4 core

S&F in replacement LED battern light fitting 20W (Double side) decorative ultra slim aluminum square profile LED light fixture 6500K(white light) fixture box type with retrofit LED rod 20 watt and connecting electricity to celing all as specified and directed/ LED insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core complete all as specified and directed

Supply and fix ceiling fan AC single phase 230/240 V size 1200mm sweep including fixing fan hook complete all as specified

S&F repair bulk head light with LED 10 W confirming to IP-66 ultra modern energy saving high brightness LED complete all as specified

Supply and fixing in replacement LED street light fitting 60W including LED lamp pressure die cast aliminum IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and directed by Engr-in-Charge

Supply and fixing new generation energy saving 80 watt LED flood light BAYBRITE FLARE HIGHWAY, powder coated PVC aluminum body with toughned glass visor. Efficacy>100 Lm/w. Available 5700 IP66 Cat part No BaYBriteflareHB80Wled857PWBBoltG

Supply and fixing LT Pannel outdoor type KIOSK base frame mounted after fabrication, installation and testing complete with dust proof chamber to accommodate 3phase, 415 volt with aluminum bus bar for 200 amps of suitable size, fabricated out of 3.15 mm thick MS sheet and painting with two coat of synthetic enamel paint over a coat of primer with twin shutter closing & locking arrangement complete of panel size 120x80cm and legs of 40 cm fixed in cement mortar (1:2:4) including of following:- (a) MCCB 100 Amp FP, 10 KA-01 No (b) MCB SPN 32 Amp-03 Nos (c) Indicator lamps (R,Y,B)- 01 Set (d) MCB SP 5-30 Amps 240 Volts - 03 Nos (e) Fixing arrangment of electrical board suitable for 6 switches

M/S Kuldip Construction Co.

KULDEEP SINGH

M/S Vinod Kumar

NATIONAL BUILDERS