PROVN OF IRON GRILL IN OTM AND DOMESTIC AREA, ADDN /ALTN OF EM INFRASTRUCTURE AT MRS AND SPL REP TO R-31 P-32 AT 4 AFSB VARANASI UNDER GE (AF) GORKAHPUR

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.Make :- Dr Fixit Pidiproof LW+ or equivalent in specified make

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distember on walls surfaces over a coat of primar over 3mm thick wall care putty after complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Taking down chowkhats and frame not exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and removal to store including cutting holes for removal of hold fast complete all as specified.

Taking down chowkat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames). complete all as spd.

Taking down shutters of any description 1sqm and n.exc 2 Sqm each complete all as specified as directed.

S&F for factory made steel ventilator with top hung shutter including hinges, steel peg stay with wire mesh arrangement complete all as specified and directed

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane. Complete all as specified and directed

S&F Pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

M&L factory made flush shutters, 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth complete all as specified

M&L PCC (1:3:6) type C1 as holdfast block, door frame filing, coping, bed block etc complete all as specified and directed

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S&F 150mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.

S&F 150 mm Aluminium handles , cast type, anodised etc.complete all as specified and directed.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing wire mesh etc. size of members of shutters as specified in SSR Part - I section 8, clause 8.24 (a), all as specified and directed by Engr-in-Charge.

S&F in repairs galvanised mild steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down existing shutter and refixing of same opening after tightening of iron mongries including hinges of PVC door complete all as specified and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

M&L for rendering 10mm thick in CM 1:4 CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces all as specified and directed

M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) et complete all as specified and as specified and directed

M&L for glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed

M&L for 75 mm PCC type C-2, 1:3:6, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement concrete surface even and smooth including forming construction joint 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed

S&F in repair Vitreous China wash basin white, flat back, including brackets size 550x400 mm complete all as specified and directed.

S&F in repairs 15 mm bore angle valves, cast copper alloy fancy type chromium plated, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 mm bore bib tap,cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair stainless steel overhead shower 75 mm dia multi flow with air effect (ABS body & face plate chrome plated) complete all as specified and directed Make :- Cera Cat Part No-F7010507

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and directed

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. Make-Cera/Hindware or equivalent

S&F in repairs SS CP Grating 150 mm size complete all as specified and directed.

S&F PVC (SWR) 'S' or 'P' 125/110 mm, setting and joint with solvent cement. Complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. Complete all as specified and directed.

S&F in repairs 32 to 40mm dia and 60 to 75 cm long PVC transparent waste pipe with fly nut, coupling for wash basin and urinal complete all as specified and directed.

Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed

S&F in repairs PVC (SWR) bends any radius for 110 mm bore provided with access door complete all as specified and directed

M&L in repaire 75/110mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as specified and directed

S&F in repair PVC (SWR) junction single, (single T) equal or unequal of 110mm dia complete all as specified and directed

S&F 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

Taking down or down steel tubing and connections 15 mm bore complete all as specified and directed

Taking down or down steel tubing and connections 20 mm bore complete all as specified and directed

S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls (concealed) or laid in floors all as specified and directed.

S&F steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls (concealed) or laid in floors all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.

M&L for Joist, channel, angle, or tee sections Fe 410-W (Gde-E-250) quality A fixed independently, with or without connecting plates, etc. complete all as specified and directed.

M&L for hot rolled steel flat framed work of water tanks mesh welded and similar work conforming Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in span, cills, steps, seismic and other similar bands, plinth courses string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complet all as specified and directed.

Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc .complete all as specified and directed.

Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc .complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for PCC (1:4:8) type D2 using (40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed .

M&L for Hardcore of stone aggregate of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work all as specified.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings completed all as specified and directed

M&L PCC (1:2:4) type B2 using (40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for steel work in tubular post/trusses including special shaped washer, hollow section, angle iron, flat iron for fixed independently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attachment and curved shaped by welding making jointless by filling including cutting etc conforming to IS 1161-1979 grade St-240 including work as directed by Engr-in - Charge complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coated GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roofing covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall and making eaves gutter, fixed with gutter self tapping screws complete all as specified and directed

Supply and installation of Isolation transformer of capacity 300 KVA , Three phase ,50 Hz , indoor/outdoor , Copper wound , oil cooled , class of insulation A ,metallic body duly powder coated designed for input Voltage range 415+-5% and output voltage range 415+-5% ,Ratio 1:1 , Vector Group :Dyn 11, Delta- star with first filling of transformer oil of requisite dielectric strength up to level conforming to IS : 335 ISI marked filtered and dehydrated oil , efficiency more than 95 % , separate neutral bushing shall be brought out for earthing Potential difference between neutral to earth less than one volt with all standard fittings like digital temperature meter , adequate number of cooling radiators , lifting hooks one set , Earthing terminal two nos complete . Testing as per BIS 9815 and 2026. Make-: ITE gurgaon, Volina or equivalent. Note - Rate quoted by the contractor must be inclusive of all necesaary fixtures required for connection.

M & L for PCC plateform for isolation transformer of capacity 300 KVA having approximate Size 1.5 Mx 1.5M x 0.5 mtr high from GL by necessary excavation in trenches, PCC 1:5:10 type E2 for foundation brick work in CM 1:6, PCC 1:2:4 B1 copping plaster 10 mm thick on brick/complete surface, PCC 1:4:8 type B1 sub base 75 mm thick as in floor, PCC 1:2:4 type B1 100 mm thick floor using extra cement, returning filling and removal of surplus soil not less than 50 m complete all as specified and directed.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for cable trench complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

M&L for Boring of holes horizontally for laying of 80 mm dia pipe (minimum depth 1200mm from top level) under road, Pavement, hard standing complete all as specified and directed.

S&F 80 mm bore GI pipe, light grade with all fittings laid in trenches, road crossing and fixed to walls, on poles etc for cable protection complete all as specified and directed.

Supply, laying and testing 240 Sqmm, 4.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size as a power point complete all as specified and directed.

M&L Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed..

M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M&L for cutting holes into or through brick walls built in in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete dia of each hole not exc. 400 mm and making good the disturbed surface to match the existing surface for installation of Exhaust fans complete all as specified and directed.

Supply and fix exhaust fan made of Steel body complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing , including writing MES No and taking down the existing exhaust fan and depositing it to MES store complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing , including writing MES No and taking down the existing exhaust fan and depositing it to MES store complete all as specified and directed.

M/s A.K Construction (BID ID -3126153)

M/S DEEKSHA CONSTRUCTION (BID ID -3114863)

Shiva Builders (BID ID -3114617)