AGE I CGN 10 24 25 MISC REPAIR WORKS OF B/R NATURE OF BLDGS AT SEC-62 UNDER AGE (I) CG NOIDA

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.

Demolition of cement concrete (unreinforced in ground floors & pavings n.exc 15 cm thick (below or above ground level)

Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each

Dismantling structural steel work including doors, window and gates but excluding framed truss etc.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.

All as per item No 08 above but excepts bricks.

M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.

S&F vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 all as specified and directed

S&F for vitrified /Granite /Marble /wood tiles textures ceramic 10 mm tiles in vertical surfaces or floors n/exe 0.36 Sqm , over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match .

M&L for Non skid ceramic coloured joint free tiles 300mm x 300mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match all as spd including 15 mm thick screed bed in CM 1:4 all as specified and directed

M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:4) complete all as spd.

All as per item No 17 above here-in-before but on vertical surfaces of walls /skirting/dado etc complete all as spd.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in CM 1:4 all as spd & directed.

S&F Pressed steel frames(105 x 60mm )for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F 2nd class hard wood 35 mm thick panelled shutter (any number of panels) with panels of veneered particle board medium density, wood particle board with commercial face veneers .

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail)

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail paneling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators anpartitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.

S&F Pre laminated interior grade one side laminated 12mm complete all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed

S&F in repair aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed

S&F in repair aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed

S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.

S&F in repair aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.

S&F for SS butt hinges 100mm medium weight cold rolled mild steel.

S&F 150 mm long floor door stopper of aluminium body and tongue, anodised with hard drawn steel spring complete.

S&F in repair 150 mm long floor door stopper of aluminium body and tongue, anodised with hard drawn steel spring complete.

Hacking out old broken glasses thickness size quality from wooden or steel frames glazed with old putty or fixed with beads.

M&L 5 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane all as spd

M&L 4mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Dismantling water storage tanks of any description/ exc 1000 liters capacity and removing from site complete all as specified.

S&F for Rotational moulded polythylene 1000 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified

S&F in repair PVC valve less 10 liter capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.

S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long.

S&F in repairs 15 mm size PVC connection with PTMT nuts of 450 mm long.

S&F in repairs 15 mm bore fancy type CP bib taps single way/two way cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.

S&F in repairs, 15 mm bore CP stop/angle valve cast copper alloy screwed down , high pressure with crutch or butterfly handle fancy type complete.

S&F in repairs Pillar tap 15mm chromium plated fancy type cast copper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete

M&L for applying 3 mm thick wall care putty and two coats of oil bound distemper on NEWLY plastered surfaces of wall including preparation of surfaces complete

M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment.

M&L for preparing plastered or un plastered New surface of ceiling and applying three coats of white wash.

M&L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.

S & F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth.

M&L for two coats of synthetic enamel paint on NEW STEEL surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

S&F in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

M&L 5.5mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares exc 0.5 Sqm in each pane including hacking out old glass panes all as spd

S&F in repair Brass 4 Levers Mortice lock,vertical type, size 100 mm for steel door/wooden door (the rates include for escutcheon plates and two keys) as directed by Engr-in -Charge.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc.

S&F for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4 mm thick all as specified.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminum GI/MS as per specification and drawing complete.

S&F in Repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified.

S & F in repairs urinal , size of 380 x 405 x 590mm white , with grating and union for discharge pipe including flushing cistern, flush pipe & wate pipe ) all as specified & directed. (Make Parryware or equivalent)

KRISHANA ELECTRIC WORKS

GLIBS CONSTRUCTION

DP COMPLEX

Shri Radhey Associates

M/S R.S. Builders