Estimate for renovation of Rohti Sub Division office Building.

Amount

Dismentling of Asbestos cement celotax or other hard board ceiling or Partition walls including supporting timber

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation.

Cement concrete 1:8:16 with stone aggregate 40 mm gauge mechanically mixed

Cement concrete 1:3:6 with stone aggregate 40 mm gauge mechanically mixed. M-10

First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Supply,fitting and Placing HYSD STEEL in reinforcement in sub structure complete as per drawing and technical specification

Supply & Fixing of japani Sheet frames (Chowkats) (Ch. No. 18.51) a Doors and windows frame of size 118mm x 60mm with 40 mm

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position

Centering & shuttering for R.C.C. work in foundation & plinth

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Terracing consiting of tiles 22.86 x11.43 x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc

Providing and Fixing 110 mm dia UPVC Rain water pipe of 4 Kgf./sqm etc.

Providing and Fixing 110 mm dia UPVC bend for Rain water pipe etc

Providing and Fixing 110 mm dia UPVC Coupling/Sockete for Rain water pipe etc

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified

Bottom khura on ground 1.2m X 0,6m cosisting of bricks on edge etc

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 35MM THICK

P/F Box Type Steel Windows as per Ch.18.38 panelled, glazed or glazed and panelled. 35 mm

Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.

Supplying and fixing glass panes with glazingclips and special metal sash putty of approved make. 18.25 (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

Extra for smooth exposed concrete finish of R.C.C. slab

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Distempering with acrylic washable oil bound distempering

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Painting two coats including priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade (16.16+16.17) Rs. 28+Rs. Rs. 66 = Rs.

Painting two coats including priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work (16.20+16.17) Rs. 24+Rs. Rs. 66 = Rs. 90/-

12.5 mm thick cement plaster 1:4

Dismantling brick work tile, masonry or tile lining (b) in cement

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Deodar Wood)

Providing and fixing steel rings chrome plated 3.80 cm. dia. for curtains.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block ofM-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).14.137

Providing electrical insulation

Renovation of washroom

Providing ceiling Fan

Providing LED Tube light of 20W

Providing SOLAR LED EXTERIOR LIGHTS

Providing Office Chair at JE Room SDO Room

Providing Office Table at JE Room & SDO Room

Providing Air Cooler at SDO JE Room

Conglomerate floor 25mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100 mm fine sand filling. Using mechanical mixer for mixing of material

WAVE CONTRACTORS (BID ID -597853)

AR CONTRACTORS (BID ID -597864)