WELCOME MAINTENANCE OF OFFICERS MD ACCN IN THE AOR OF AGE BR I UNDER GE NARANGI

Amount

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fix in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed.

Supply and fix in repairs, suspended 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) only as per direction of engineer in charge complete all as specified and directed.

Demolition of brick or stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc to any radius in half brick thick walls built in built in CM 1:4 complete all as specifed and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement.

Material and labour for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregated) as in padding of roof top finishing even and smooth without using extra cement to ascertain the proper slope with using WPC as per manufacturer instruction complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement (WPC shall be measured and paid seperately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming ti IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be less appliedb over bituminous primer as specified above over a application of polymeric membrane shall by torch application. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction

Cutting and uprooting vegetation growth/plants of any size on roof surface or chajja including muds and disposal the same to a distance n.exe. 50 m and cleaning the site complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

Material and labour for mild steel flat iron hold fasts fixed to chowkats confirming to Fe-290 Gde-E-165 etc, complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying Birla white/JK White cement putty complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement.

Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall and applying two coat of oil bound distemper over one coat of primer including 1mm thick wall care putty complete all as specified and directed .

Material and labour for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

Material and labour for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Material and labour for coloured non skid cermic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for vitrified ceramic tiles, light shade, 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for glazed light coloured/printed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

Material and labour for 12mm to 14mm thick green marble slab for kitchen plat form / shelf and vertical faces duly machine polished full round on external/projected surface over and including 15 mm thick screed in cement mortar 1:6complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each all as specified.

Taking down Shutters of any description n exc 1 sq. m each all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

Supply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

Supply and fix 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.

Supply and fix 30 mm thcik Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Supply and fix solid pre lam PVC door frame/CHOWKHAT of size 50mm x 47mm made out of 5mm PRELAM PVC sheet reinforced with M.S. square tube 15mm x 15mm. The two vertical door profiles are to be reinforced with 40mm x 20mm MS tube 19 guage. Door frame need to be fixed to wall using 100 mm long MS screws etc complete.

Supply and fix factory made solid panel pre lam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes 19 guage thickness and size of 40mm x 20 mm for stiles, top,bottom and lock rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 30mm width stuck inside with solvent cement. 110 mm width forming stiles in which 100mmm should be flat and 5 mm should be tapered, and 5 mm thich, 135 mm wide prelam pvc sheet for top and bottom rail in wchich 125 should be flat and 5 mm should be tapered on either side of panel, also for lock rail 145 mm sheet, 125 should be flat and 5 mm tapered on either side. And additional 5 mm thich pvc strip struck inside of C channel. and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete

Material and labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and labour for preparation treating small articles such as stop, covers gully grating, holdfasts, ends of post backs of chowkats, etc. area n.exc 0.50 sqm each and applying tar or coal tar black paint to back of chowkats.

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for Plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in back filling in pressed steel door and window frame, fixing of holdfast etc complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified an directed.

Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 75 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Material and labour for 100 mm long Hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix powder coated three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete including 4.00 mm thick tinted glass panes, rubber beading, mosquito proofing, locking system etc. complete all as specified and as directed. (Refer Jindal Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689) (iv) Frame bottom :- 75 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 75 x 26 x 1 mm thick (20672)

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Supply and fix in repairs prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws and magnet catcher to timber frame work complete all as specified and as directed.

Supply and fix stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and as directed.

Supply and fix in repairs Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fix in repairs, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodized with hard drawn steel spring, fixed in floors complete all as specified and as directed.

Supply and fix aluminium door seal fixed to door shutter with screws complete all as specified and as directed.

Supply and fix in repairs 20-25 mm dia stainless steel tublar curtain rods including fancy type with fixing brackets, stops, rollers etc. incl decorative stainless-steel knob of each end of curtain rod complete all as specified and as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for preparation of newly prepared steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Taking up or down steel water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fix GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 15 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fix GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 20 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

Supply and fix in repairs bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair 2 way Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated centre hole wash basin mixer complete all as specified and as directed.

Supply and fix in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs concealed stop cock with sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and as directed.

Supply and fix in repairs stop valves/angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

Supply and fix in repairs 2 way angle valve 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs Gun metal gate valve with iron wheel head screwed both ends for GI pipe 15mm bore complete all as specified and as directed.

Supply and fix in repairs Gun metal gate valve with iron wheel head screwed both ends for GI pipe 20mm bore complete all as specified and as directed.

Supply and fix as in repairs, brass chromium plated tubular towel rail 20 mm dia 60 cm long including brackets complete all as specified and as directed.

Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed.

Supply and fix in repairs chromium plated swivel shower rose of size 150x150mm square type with accessories complete all as specified and as directed.

Supply and fix in repairs chromium plated soap dish fixed to walls with brass screws complete all as specified and as directed.

Supply and fix in repairs of chromium plated health faucet with 15 mm bore 1m long tube acrylic type complete all as specified and as directed.

Supply and fix in repairs Glass shelf with chromium plated guard complete all as specified and as directed.

Supply and fix in repairs corner shelf with chromium plated guard complete all as specified and as directed.

Supply and fix in repairs toilet paper holder chromium plated fixed to wall with chromium plated Brass screw complete all as specified and as directed.

Supply and fix in repairs PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fix in repairs stainless steel kitchen rack size 900mmX900mmX200mm complete all as specified and as directed.

Supply and fix in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

Supply and fix in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

Supply and fix vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,PVC connection pipe complete all as specified and as directed

Supply and fix in repairs 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

Supply and fix in repairs Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

Supply and fix in repairs Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Supply and fix in repairs chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed.

Supply and fix in repairs 32mm dia PVC waste pipe complete all as specified and as directed.

Supply and fix in repairs stainless steel Grating doom 100mm dia complete all as specified and as directed.

Supply and fix in repairs stainless Steel Grating doom 125mm dia of complete all as specified and as directed.

Supply and fix in repairs Stainless Steel Grating doom, 125mm dia with waste hole complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-Charge.

Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed..

All as per item No 118 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed.

All as per item No 118 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No 118 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No 118 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed..

All as per item No 123 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed.

All as per item No 123 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No 123 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No123 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.

Supply and fix Bell push switch, flush type, 5 Amps 230 volt complete all as directed.

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed..

Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed.

Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as directed. .

Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed

Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as directed.

Supply and fix Ding Dong AC. 230 volts,single pole complete all as directed.

Supply and fix Bell, AC, 230 volts, single pole complete all as directed.

S& F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed.

Material and labour for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply and fixing in repair batten type LED light fitting 1x 20W, 220V,AC decorative type with internal SPD upto 4kV and overload voltage protection upto 440V including flexible copper conductor cable of suitable size from ceiling rose complete all as specified .

Supply and fix in repairs/replacement wall mounted decorative luminaire in design mesh suitable for 10W LED lamp B22 base ,including lamp of 10watt .Complete as directed as specified .Make -Havells Cat Part: Glaze wall Light or equivalent Phillips /Bajaj

Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I.

Supply and fix in repair of unsv switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.

Supply and fix in repair/replacement of unsv switch flush type 15 Amp single pole one way.

Supply and fix in repair/ replacement of unsv socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.

Supply and fix in repair/replacement of unsv switch socket combination outlet 2-in-1, 5 Amp flush type complete all as directed.

Supply and fix in repair/ replacement of unsvr switch socket combination multipurpose, 2 in 1, 3 pin, 5 & 15 Amp flush type complete all as directed.

Supply and fix in repair/ replacement of unsv socket outlet 3 Pin 15 Amp 240 volts .

Supply and fix in repair/replacement of unsv ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

Supply and fix in repair/replacement of unsv lamp holder insulated PVC/Polycarbonate/bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed

Supply and fix in repair/replacement of unsv stepped type electronic fan regulator, flush type complete all as directed.

Supply and fix in repair/ replacement of unsv fan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as directed.

Supply fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) Make :- Legrand/ Siemens/Schnider/L&T

Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 100 Amps complete all as directed.

Supply and fix modular fan regulator,120 W, 2 module.

Supply and fix modular switch 1 way 6 amp, 1 module

Supply and fix modular switch 1 way 16 amp, 1 module.

Supply and fix modular switch 2 way 6 amp, 1 module.

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module..

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module

Supply and fix modular Bell push 6A, 1 module

Supply and fix modular white cover plate with frame, 1 module

Supply and fix modular white cover plate with frame, 2 module

Supply and fix modular white cover plate with frame, 3 module

Supply and fix modular white cover plate with frame, 4 module

Supply and fix modular white cover plate with frame, 6 module

Supply and fix modular white cover plate with frame, 8 module

Supply and fix metal flush box 1/2 module for modular switches

Supply and fix metal flush box 3 module for modular switches

Supply and fix metal flush box 4 module for modular switches

Supply and fix metal flush box 6 module for modular switches

Supply and fix metal flush box 8 module for modular switches

Dressing of pre-wired casing caping/PVC conduit by changing Casing caping /PVC conduit and necessary connecting items (such as flexiable conduit ,screws etc) complete all as specified and directed.

Supply and fixing in repair LED building security light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt, CRI>70, PF>0.95, CCT=5700±300, IP66, impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose.

Material and labour for GI bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape all as directed, length of GI Pipe shall not be less than 2.0 metre for fixing of light fittings including taking out old bracket complete all as specified and as directed.

Disconnecting the main power supply to distribution box and make a proper dressing of SPN/TPN/VTPN MCB/MCCB DBs of pre-connected MCBs by changing screw of DB cover ,earth wire and other necessary connecting items and dressing of wires with the help of cable tie inside the distribution box after completion supply power complete all as specified and directed.

M/s Talukdar Construction (BID ID -3102272)

R S TRADERS (BID ID -3102833)

M/S Bharat Construction (BID ID -3107189)

M/S MANOJ PAUL (BID ID -3105506)

M/S SEBANGSHISH TRADERS (BID ID -3105363)

M/S M Ahmed and Co. (BID ID -3106403)

SANDIP BARUAH (BID ID -3105599)