NIT No. 16 (22-23) Item No. 6

Replacement of damaged Tube well gate by fabrication of MS gate with MS angle 40x40x6, MS sheet 2 mm thick , with heavy support , proper locking arrangement and civil work with proper paint required as per site requirement

Repair of damaged parts Tube well gate by fabrication with MS angle 40x40x6, MS sheet 2 mm thick , with heavy support , proper locking arrangement with proper paint required as per site required.

Repairing of roller shutter by replacement of damaged shutter parts like strips, rollers and gears etc and greasing of same and painting the same with anti corrosive paint with proper color including surface preparation rubbing with suitable coat of primer and thinner for painting. The Labour charges like : Scrubbing/Cleaning of rust from the equipment and proper processing of surface by Manual labour/ machine (grinder) by air Compressor

Dismantling of old Sluice Valve from main delivery line 0f 150 mm and dewatering the line, covered the end with dead flange

Supply CI, D/F non rising spindle sluice valve PN.1.0 of 150 mm dia. Make-kirloskar/IVC/Jupiter/Djb Approved Make

Labour charge for Installation ,testing of CI, D/F non rising spindle sluice valve PN.1.0 of 150 mm dia including Nut Bolts etc in main line with civil work as per required.

Fabrication/Fixing of M.S. ladder of size made by M.S channel of size 100 X 50mm, M.S angle of size 65 X 65 X 6mm Including the cost of grouting the same in the UGR Tank with civil work complete in all respect. With anticorrosive primer and painting with black synthetic Enamel paint. (1) 5 Mtr X 0.5 mtr.

Bansal Engineers and Traders

PARTH SHARMA

SUSHMA ENTERPRISES

TARUN DIXIT

V.K. ENTERPRISES